# Recommendation Needed: Muffler shop --SOLVED!-- Thanks to Mufflerman!
**URL:** https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566
**Category:** NYSpeed Automotive
**Created:** [January 19, 2009, 8:53am UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566 "2009-01-19T08:53:07Z")
**Posts on this page:** 17
**Page:** 2
### Author:  [@JayS](https://forums.speedlife.net/u/JayS)
#### Post date: [January 19, 2009, 1:07pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/21 "2009-01-19T13:07:26Z")
^ The cats pajamas?
Did someone beat you with the 1920’s today? 🙂
---
### Author:  [@Pauly](https://forums.speedlife.net/u/Pauly)
#### Post date: [January 19, 2009, 1:44pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/22 "2009-01-19T13:44:55Z")
FYI that front pipe/cat carries a 8yr/80,000 mile manufact. waranty as per epa law. this may be why you cant find an aftermarket one.
---
### Author:  [@\_Karu](https://forums.speedlife.net/u/_Karu)
#### Post date: [January 19, 2009, 1:46pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/23 "2009-01-19T13:46:02Z")
> [@Pauly](#):
>
> FYI that front pipe/cat carries a 8yr/80,000 mile manufact. waranty as per epa law. this may be why you cant find an aftermarket one.
That’s true, however, the warranty will not cover rust damage, right? i am sure the cat itself is in tip-top condition. 🙂
---
### Author:  [@Viper966](https://forums.speedlife.net/u/Viper966)
#### Post date: [January 19, 2009, 1:53pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/24 "2009-01-19T13:53:16Z")
> [@\_Karu\_](#):
>
> That’s true, however, the warranty will not cover rust damage, right? i am sure the cat itself is in tip-top condition. 🙂
they do cover rust…
anything pre cat is covered…
---
### Author:  [@deebo](https://forums.speedlife.net/u/deebo)
#### Post date: [January 19, 2009, 1:55pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/25 "2009-01-19T13:55:19Z")
how much custom fabbing do they do? everything?
as far as test pipes go
---
### Author:  [@Bacon](https://forums.speedlife.net/u/Bacon)
#### Post date: [January 19, 2009, 1:59pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/26 "2009-01-19T13:59:54Z")
Legally, they can not remove cats. But they can pretty much make anything you want.
EDIT: Even then a high-flow cat isn’t that much.
---
### Author:  [@nelstoys](https://forums.speedlife.net/u/nelstoys)
#### Post date: [January 19, 2009, 2:00pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/27 "2009-01-19T14:00:25Z")
I have every exhaust sys done there, and i have an exhaust on every car i own.
---
### Author:  [@airhead](https://forums.speedlife.net/u/airhead)
#### Post date: [January 19, 2009, 2:34pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/28 "2009-01-19T14:34:02Z")
I was really happy with them. They give you a lot of options, and they’re honest. They worked with me when I wanted to piece together a cheap exhaust for my beater. No issues whatsoever. It’s nice being able to just drive in without an appointment too.
---
### Author:  [@Inn-Tune](https://forums.speedlife.net/u/Inn-Tune)
#### Post date: [January 19, 2009, 2:52pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/29 "2009-01-19T14:52:07Z")
While we make full exhausts for people and IC piping etc., for little stuff like what you had going on I send people over there all the time. They’re good guys and their pricing is usually extremely fair.
---
### Author:  [@deebo](https://forums.speedlife.net/u/deebo)
#### Post date: [January 19, 2009, 2:55pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/30 "2009-01-19T14:55:49Z")
> [@Bacon](#):
>
> Legally, they can not remove cats. But they can pretty much make anything you want.
>
> EDIT: Even then a high-flow cat isn’t that much.
my problem is my header is longer than a stock gsr header, but the catback is positioned stock where it should be, so im not sure if a highflow cat would work
ill prob just end up getting an adjustable one then oh wellz
i havent mocked anything up yet, too cold out ☹
---
### Author:  [@Carnut](https://forums.speedlife.net/u/Carnut)
#### Post date: [January 19, 2009, 6:35pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/31 "2009-01-19T18:35:07Z")
Glad to hear you got it fixed ok 🙂
---
### Author:  [@Drexial](https://forums.speedlife.net/u/Drexial)
#### Post date: [January 19, 2009, 7:00pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/32 "2009-01-19T19:00:13Z")
while this is still active. Anyone know if they do full stainless steel piping?
I’m looking to get a single pipe exhaust in stainless if possible, High flow cat, resonator and muffler 1-2 out.
Suppose I could call them when the time comes. But just asking while the thread is still warm.
---
### Author:  [@\_Karu](https://forums.speedlife.net/u/_Karu)
#### Post date: [January 20, 2009, 6:54am UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/33 "2009-01-20T06:54:26Z")
> [@Viper966](#):
>
> they do cover rust…
>
> anything pre cat is covered…
:eekdance:
I have to keep this in mind then. Is this universal for most car manufacturers? I wonder what’s Honda’s policy on this.
---
### Author:  [@Pauly](https://forums.speedlife.net/u/Pauly)
#### Post date: [January 20, 2009, 8:23am UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/34 "2009-01-20T08:23:06Z")
yes any car.
And you are not required to be the original owner.
last nov. i had 2 cats replaced for free by honda on a 2001 passport with 75,000 miles on it. about $2,000 worth of cats (retail)
I also talked them into a muffler being it was full of cataylist substrate
---
### Author:  [@Bacon](https://forums.speedlife.net/u/Bacon)
#### Post date: [January 20, 2009, 9:08am UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/35 "2009-01-20T09:08:48Z")
> [@Drexial](#):
>
> while this is still active. Anyone know if they do full stainless steel piping?
>
> I’m looking to get a single pipe exhaust in stainless if possible, High flow cat, resonator and muffler 1-2 out.
>
> Suppose I could call them when the time comes. But just asking while the thread is still warm.
Yes, I just had them weld in a new bung into my stainless downpipe, fab up a 3 foot extension with a high-flow cat, and weld new hangers on to my stainless cat-back so it would fit on my car.
---
### Author:  [@Firehawk853](https://forums.speedlife.net/u/Firehawk853)
#### Post date: [January 20, 2009, 11:25am UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/36 "2009-01-20T11:25:37Z")
> [@Drexial](#):
>
> while this is still active. Anyone know if they do full stainless steel piping?
>
> I’m looking to get a single pipe exhaust in stainless if possible, High flow cat, resonator and muffler 1-2 out.
>
> Suppose I could call them when the time comes. But just asking while the thread is still warm.
Yeah stainless steel piping with mild steel MIG wire :tdown:
---
### Author:  [@Drexial](https://forums.speedlife.net/u/Drexial)
#### Post date: [January 20, 2009, 3:02pm UTC](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566/37 "2009-01-20T15:02:10Z")
> [@Firehawk853](#):
>
> Yeah stainless steel piping with mild steel MIG wire :tdown:
Any other suggestions for a place that does full stainless?
I know there is a place in Rochester that deals with stainless. But I’d like to keep it in western NY
[Previous page](https://forums.speedlife.net/t/recommendation-needed-muffler-shop-solved-thanks-to-mufflerman/61566.md?page=1)