# Redline Motorsports? good or bad **URL:** \ **Category:** Shift518 Automotive\ **Created:** [May 30, 2011, 8:07am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658 "2011-05-30T08:07:36Z")\ **Posts on this page:** 20\ **Page:** 11
**Author:** ![SDP](https://avatars.discourse-cdn.com/v4/letter/s/e95f7d/32.png) [@SDP](https://forums.speedlife.net/u/SDP)\ **Post date:** [June 2, 2011, 9:51am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/201 "2011-06-02T09:51:12Z")
> [@Holy Crap...25 Million Free Mp3's.Legally](https://forums.speedlife.net/t/holy-crap-25-million-free-mp3s-legally/42611/13): > > It does when they work on a platform they have no experience with. lol LOL @ you!! Tell me what I half assed… You gave me a crank pulley to install and the bolt would not come off no matter what I tried, pretty much every technician would do the same thing I did. You even put me on the phone with a nissan tech that I used to work right next to!!! If you requested an afr readout we would have gladly done so unless our sensor was bad and we were without a spare. Sorry if you had a bad experience but we wouldnt have known… you were cool the whole time, now you seem to be upset and dramatic. Wish you would have just spoken up from the get go if you were truly that disappointed. ---
**Author:** ![Boost\_Creep](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boost_creep/32/6366_2.png) [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)\ **Post date:** [June 2, 2011, 9:56am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/202 "2011-06-02T09:56:08Z")
> [@Buffalo Bills 2008 Off Season Discussion](https://forums.speedlife.net/t/buffalo-bills-2008-off-season-discussion/42721/10): > > LOL @ you!! Tell me what I half assed… > > You gave me a crank pulley to install and the bolt would not come off no matter what I tried, pretty much every technician would do the same thing I did. You even put me on the phone with a nissan tech that I used to work right next to!!! > > If you requested an afr readout we would have gladly done so unless our sensor was bad and we were without a spare. > > Sorry if you had a bad experience but we wouldnt have known… you were cool the whole time, now you seem to be upset and dramatic. Wish you would have just spoken up from the get go if you were truly that disappointed. :pop ---
**Author:** ![DeathbyRT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deathbyrt/32/6648_2.png) [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)\ **Post date:** [June 2, 2011, 9:59am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/203 "2011-06-02T09:59:55Z")
What brocarian said ---
**Author:** ![psi2high](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/psi2high/32/6320_2.png) [@psi2high](https://forums.speedlife.net/u/psi2high)\ **Post date:** [June 2, 2011, 10:11am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/204 "2011-06-02T10:11:02Z")
> [@Buffalo Bills 2008 Off Season Discussion](https://forums.speedlife.net/t/buffalo-bills-2008-off-season-discussion/42721/10): > > LOL @ you!! Tell me what I half assed… > > You gave me a crank pulley to install and the bolt would not come off no matter what I tried, pretty much every technician would do the same thing I did. You even put me on the phone with a nissan tech that I used to work right next to!!! > > If you requested an afr readout we would have gladly done so unless our sensor was bad and we were without a spare. > > Sorry if you had a bad experience but we wouldnt have known… you were cool the whole time, now you seem to be upset and dramatic. Wish you would have just spoken up from the get go if you were truly that disappointed. And the truth comes out ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [June 2, 2011, 10:13am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/205 "2011-06-02T10:13:29Z")
We already knew the truth. ---
**Author:** ![d\_gage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/d_gage/32/6321_2.png) [@d\_gage](https://forums.speedlife.net/u/d_gage)\ **Post date:** [June 2, 2011, 10:13am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/206 "2011-06-02T10:13:58Z")
You can’t handle… ---
**Author:** ![car\_ramrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/car_ramrod/32/6441_2.png) [@car\_ramrod](https://forums.speedlife.net/u/car_ramrod)\ **Post date:** [June 2, 2011, 10:14am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/207 "2011-06-02T10:14:41Z")
> [@5/24/08 - OFFICIAL NYSpeed Spring BBQ @ Dunnville Autodrome](https://forums.speedlife.net/t/5-24-08-official-nyspeed-spring-bbq-dunnville-autodrome/42266/138): > > so much dumbassery in here , why are the nissan guys some of the dumbest ??? Don’t classify all of us with this turd :rofl ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [June 2, 2011, 11:38am UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/208 "2011-06-02T11:38:23Z")
> [@Buffalo Bills 2008 Off Season Discussion](https://forums.speedlife.net/t/buffalo-bills-2008-off-season-discussion/42721/10): > > LOL @ you!! Tell me what I half assed… > > You gave me a crank pulley to install and the bolt would not come off no matter what I tried, pretty much every technician would do the same thing I did. You even put me on the phone with a nissan tech that I used to work right next to!!! > > If you requested an afr readout we would have gladly done so unless our sensor was bad and we were without a spare. > > Sorry if you had a bad experience but we wouldnt have known… you were cool the whole time, now you seem to be upset and dramatic. Wish you would have just spoken up from the get go if you were truly that disappointed. Tell me I didn’t call that one!!! ---
**Author:** ![usmc2801](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/usmc2801/32/6387_2.png) [@usmc2801](https://forums.speedlife.net/u/usmc2801)\ **Post date:** [June 2, 2011, 12:19pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/209 "2011-06-02T12:19:14Z")
Can’t wait to see his response…bRyan save me some popcorn! ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [June 2, 2011, 12:28pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/210 "2011-06-02T12:28:11Z")
There’s a Greddy TT’d 350Z that comes to the valley to drift. ---
**Author:** ![usmc2801](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/usmc2801/32/6387_2.png) [@usmc2801](https://forums.speedlife.net/u/usmc2801)\ **Post date:** [June 2, 2011, 12:33pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/211 "2011-06-02T12:33:30Z")
> [@Helicopter vs. Spinning Platform](https://forums.speedlife.net/t/helicopter-vs-spinning-platform/42726/19): > > There’s a Greddy TT’d 350Z that comes to the valley to drift. Cool story PJB :hug ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [June 2, 2011, 12:34pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/212 "2011-06-02T12:34:27Z")
cant wait for this response. ---
**Author:** ![Nismo\_575](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nismo_575/32/6659_2.png) [@Nismo\_575](https://forums.speedlife.net/u/Nismo_575)\ **Post date:** [June 2, 2011, 1:10pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/213 "2011-06-02T13:10:14Z")
I did in fact ask for an AFR. I was curious to see how much the mods leaned out the car knowing I wasn’t going to tune if for sometime. As for the pulley, the instruction on how to install it were in the box. You never even read them! Hence, why you weren’t able to remove the crank pulley. Then you guys wanted to rake me over for the labor for an unfinished job. I have been to many shops and this visit didn’t go so smooth did it? Zim ---
**Author:** ![6spd\_ek](https://avatars.discourse-cdn.com/v4/letter/6/45deac/32.png) [@6spd\_ek](https://forums.speedlife.net/u/6spd_ek)\ **Post date:** [June 2, 2011, 1:50pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/214 "2011-06-02T13:50:19Z")
> [@Plane on a conveyor belt (small scale) JUST TOOK OFF !!!!!!](https://forums.speedlife.net/t/plane-on-a-conveyor-belt-small-scale-just-took-off/42706/77): > > As for the pulley, the instruction on how to install it were in the box. You never even read them! Hence, why you weren’t able to remove the flywheel. ahhh I see now, you have to remove the flywheel to remove the crank pulley… it all makes sense now :bowdown ---
**Author:** ![DeathbyRT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deathbyrt/32/6648_2.png) [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)\ **Post date:** [June 2, 2011, 1:58pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/215 "2011-06-02T13:58:35Z")
Yeah the new style pully located right near the flywheel under the inside of the intake manifold behind the rear seats. ---
**Author:** ![Nismo\_575](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nismo_575/32/6659_2.png) [@Nismo\_575](https://forums.speedlife.net/u/Nismo_575)\ **Post date:** [June 2, 2011, 2:04pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/216 "2011-06-02T14:04:03Z")
Haha typo. In the instructions it clearly stated to remove the starter and lock out the flywheel. Vs killing it with the torque gun in gear ☹ Had it been read, you would have saved yourself alot of time and my engine some abuse. ---
**Author:** ![TurboTravis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbotravis/32/6406_2.png) [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)\ **Post date:** [June 2, 2011, 2:10pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/217 "2011-06-02T14:10:08Z")
Easiest way to break loose a crank bolt is to disable the car from starting, wedge a breaker bar against the floor and crank the engine. If you don’t know what side of the floor to wedge it against, you should not be working on cars to begin with. ---
**Author:** ![DeathbyRT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deathbyrt/32/6648_2.png) [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)\ **Post date:** [June 2, 2011, 2:11pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/218 "2011-06-02T14:11:05Z")
You mean you didnt know what you were saying, said the wrong shit, were called out on it, looked up the proper thing and said you made an error. ---
**Author:** ![usmc2801](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/usmc2801/32/6387_2.png) [@usmc2801](https://forums.speedlife.net/u/usmc2801)\ **Post date:** [June 2, 2011, 2:11pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/219 "2011-06-02T14:11:34Z")
> [@Lancaster to stay open with big changes.](https://forums.speedlife.net/t/lancaster-to-stay-open-with-big-changes/42729/14): > > Haha typo. > > In the instructions it clearly stated to remove the starter and lock out the flywheel. Vs killing it with the torque gun in gear ☹ Had it been read, you would have saved yourself alot of time and my engine some abuse. and back to step one…if you know everything…DO IT YOURSELF AND DONT BE SUCH A LAZY FUCK AND BITCH IF SOMETHING GOES WRONG AT A SHOP. ---
**Author:** ![TurboTravis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbotravis/32/6406_2.png) [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)\ **Post date:** [June 2, 2011, 2:11pm UTC](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658/220 "2011-06-02T14:11:41Z")
> [@Lancaster to stay open with big changes.](https://forums.speedlife.net/t/lancaster-to-stay-open-with-big-changes/42729/14): > > Haha typo. > > In the instructions it clearly stated to remove the starter and lock out the flywheel. Vs killing it with the torque gun in gear ☹ Had it been read, you would have saved yourself alot of time and my engine some abuse. Didn’t hurt anything, and it would not of helped. [Previous page](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658.md?page=10) [Next page](https://forums.speedlife.net/t/redline-motorsports-good-or-bad/258658.md?page=12)