# removing bearing from hub?

**URL:** <https://forums.speedlife.net/t/removing-bearing-from-hub/80078>\
**Category:** SON240sx Automotive\
**Created:** [September 18, 2003, 12:01pm UTC](https://forums.speedlife.net/t/removing-bearing-from-hub/80078 "2003-09-18T12:01:15Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![AnDrEw](https://avatars.discourse-cdn.com/v4/letter/a/f19dbf/32.png) [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)\
**Post date:** [September 18, 2003, 12:01pm UTC](https://forums.speedlife.net/t/removing-bearing-from-hub/80078/1 "2003-09-18T12:01:15Z")

</div>

I wanna remove the front wheel bearing from the hub so i can replace it. So i also need to know how to press it into the hub. I dun wanna take it to a shop to get it done. I have bearing, just tryin to figure out how to drive old one out and new one in without damaging the bearing.

Can anyone help me, or know of someone that could do the task for me as a favour. I know a shop will rape me on cost.

Thanks,

Andrew.

---

<div class="post-metadata">

**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\
**Post date:** [September 18, 2003, 1:55pm UTC](https://forums.speedlife.net/t/removing-bearing-from-hub/80078/2 "2003-09-18T13:55:18Z")

</div>

Do you have a C-Clamp or a vise with a pipe of the outside diameter of the bearing. It has to be pressed out.

Good luck, I just took one look at mine and cringed and said to myself ill wait till i get bomex’s hubs. 🙂

---

<div class="post-metadata">

**Author:** ![SHIFT\_KA24DET](https://avatars.discourse-cdn.com/v4/letter/s/b9bd4f/32.png) [@SHIFT\_KA24DET](https://forums.speedlife.net/u/SHIFT_KA24DET)\
**Post date:** [September 18, 2003, 5:54pm UTC](https://forums.speedlife.net/t/removing-bearing-from-hub/80078/3 "2003-09-18T17:54:35Z")

</div>

I wonder how much they would charge for that?

---

<div class="post-metadata">

**Author:** ![AnDrEw](https://avatars.discourse-cdn.com/v4/letter/a/f19dbf/32.png) [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)\
**Post date:** [September 18, 2003, 7:20pm UTC](https://forums.speedlife.net/t/removing-bearing-from-hub/80078/4 "2003-09-18T19:20:04Z")

</div>

> [@SHIFT\_SR20DET](#):
>
> I wonder how much they would charge for that?

free 🙂

---

<div class="post-metadata">

**Author:** ![AnDrEw](https://avatars.discourse-cdn.com/v4/letter/a/f19dbf/32.png) [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)\
**Post date:** [September 19, 2003, 6:02pm UTC](https://forums.speedlife.net/t/removing-bearing-from-hub/80078/5 "2003-09-19T18:02:02Z")

</div>

i got my buddies shop to press the old one out and press the new one in 🙂 Now i dun hafta put up with the crazy grinding noise, and vibration in the steering wheel 🙂 Thanks to Adam for getting me the bearing. I’ll post how to tomorrow, as i took some pictures.