# removing hicas tie rod and ball joint from knuckle

**URL:** https://forums.speedlife.net/t/removing-hicas-tie-rod-and-ball-joint-from-knuckle/153191
**Category:** SON240sx Automotive
**Created:** [April 11, 2010, 5:26pm UTC](https://forums.speedlife.net/t/removing-hicas-tie-rod-and-ball-joint-from-knuckle/153191 "2010-04-11T17:26:31Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![Markd1](https://avatars.discourse-cdn.com/v4/letter/m/ccd318/32.png) [@Markd1](https://forums.speedlife.net/u/Markd1)
#### Post date: [April 11, 2010, 5:26pm UTC](https://forums.speedlife.net/t/removing-hicas-tie-rod-and-ball-joint-from-knuckle/153191/1 "2010-04-11T17:26:31Z")

</div>

I dont have a ball joint remover, and my hammer isint gonna work without breaking something. The subframe is out of the car and on the floor, very accesable. please help.  
richmond hill… anytime tmro or after 6 is good.

I have beer… and a bong

---

<div class="post-metadata">

### Author: ![Markd1](https://avatars.discourse-cdn.com/v4/letter/m/ccd318/32.png) [@Markd1](https://forums.speedlife.net/u/Markd1)
#### Post date: [April 12, 2010, 8:16pm UTC](https://forums.speedlife.net/t/removing-hicas-tie-rod-and-ball-joint-from-knuckle/153191/2 "2010-04-12T20:16:49Z")

</div>

done