# Repairing Floor Rust **URL:** \ **Category:** SON240sx Automotive\ **Created:** [May 19, 2009, 8:36pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627 "2009-05-19T20:36:34Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![91S131](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91s131/32/5732_2.png) [@91S131](https://forums.speedlife.net/u/91S131)\ **Post date:** [May 19, 2009, 8:36pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/1 "2009-05-19T20:36:34Z")
have a small area under passenger floor needs to be cleaned with new metal in. In Hamilton can supply tools and whatever else, just ask. Pay cash too pm me if you can do it. Thanks ---
**Author:** ![91S131](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91s131/32/5732_2.png) [@91S131](https://forums.speedlife.net/u/91S131)\ **Post date:** [May 21, 2009, 8:40pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/2 "2009-05-21T20:40:55Z")
any places i could go ? if no one is avail. ---
**Author:** ![Stiky](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stiky/32/5692_2.png) [@Stiky](https://forums.speedlife.net/u/Stiky)\ **Post date:** [May 21, 2009, 9:25pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/3 "2009-05-21T21:25:39Z")
honestly its not that hard… it all depends where it is. Just take some thinner gage sheet metal, cut it 1/2" bigger than hole, shape it roughly, rivet it down, then weld around the outside… or if you want a cheap and ghetto way, just put rivets in every 4-5 cm around the perimeter of the sheet and then seal it with the white silicon sealent, then undercoat or truck bed liner or rocker guard the area from underneath. water proof and rust proof and should hold up for a year or two. ---
**Author:** ![91S131](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91s131/32/5732_2.png) [@91S131](https://forums.speedlife.net/u/91S131)\ **Post date:** [May 22, 2009, 8:35pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/4 "2009-05-22T20:35:41Z")
i barely have the tools, and cant weld unfortunetely, would like to learn tho. ^ ---
**Author:** ![Blue\_S13](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blue_s13/32/5563_2.png) [@Blue\_S13](https://forums.speedlife.net/u/Blue_S13)\ **Post date:** [May 22, 2009, 8:58pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/5 "2009-05-22T20:58:41Z")
I can most likely help you out man. Send me a pic via PM of the floor. ---
**Author:** ![Stiky](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stiky/32/5692_2.png) [@Stiky](https://forums.speedlife.net/u/Stiky)\ **Post date:** [May 23, 2009, 5:40am UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/6 "2009-05-23T05:40:52Z")
> [@New MR2 tail lights and some shots tonight...](https://forums.speedlife.net/t/new-mr2-tail-lights-and-some-shots-tonight/22062/12): > > i barely have the tools, and cant weld unfortunetely, would like to learn tho. ^ So use the pop rivet way as a temp fix for summer then this winter get it patched for good ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [May 23, 2009, 6:40am UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/7 "2009-05-23T06:40:12Z")
i know s1dc use to do some fixes for ppl on the board… not to sure if they still do tho ---
**Author:** ![91S131](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91s131/32/5732_2.png) [@91S131](https://forums.speedlife.net/u/91S131)\ **Post date:** [May 23, 2009, 6:55am UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/8 "2009-05-23T06:55:22Z")
i can ask chris, i bought some things from him earlier this year ---
**Author:** ![corpse](https://avatars.discourse-cdn.com/v4/letter/c/ed655f/32.png) [@corpse](https://forums.speedlife.net/u/corpse)\ **Post date:** [May 25, 2009, 8:39pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/9 "2009-05-25T20:39:18Z")
i just finished fixing my floor and frame… really not that hard, just takes time. lots of tacking, hammering, welding, siliconing and bedliner! then your done… ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [June 1, 2009, 2:56pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/10 "2009-06-01T14:56:38Z")
If you are willing to drive your car to Toronto, I can fixe it and more for you if you want, just pm me about it! ---
**Author:** ![91S131](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91s131/32/5732_2.png) [@91S131](https://forums.speedlife.net/u/91S131)\ **Post date:** [June 4, 2009, 8:58pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/11 "2009-06-04T20:58:25Z")
where abouts in Toronto ? and Thanks ---
**Author:** ![touge8](https://avatars.discourse-cdn.com/v4/letter/t/d6d6ee/32.png) [@touge8](https://forums.speedlife.net/u/touge8)\ **Post date:** [June 5, 2009, 11:38am UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/12 "2009-06-05T11:38:17Z")
theres a guy on this board that I know has a lot of hands on experience with this stuff… “dk\_fabiostantos” or something like that. I met him once, but I’ve seen some of his work and he is really good with things like this. ---
**Author:** ![Tarz](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Tarz](https://forums.speedlife.net/u/Tarz)\ **Post date:** [June 5, 2009, 12:01pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/13 "2009-06-05T12:01:09Z")
dude if u wanna come up to keswick i can do it pm me ---
**Author:** ![Tarz](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Tarz](https://forums.speedlife.net/u/Tarz)\ **Post date:** [June 5, 2009, 12:02pm UTC](https://forums.speedlife.net/t/repairing-floor-rust/124627/14 "2009-06-05T12:02:04Z")
> [@Official NYSPEED Wii Friend codes](https://forums.speedlife.net/t/official-nyspeed-wii-friend-codes/21695/55): > > theres a guy on this board that I know has a lot of hands on experience with this stuff… > “dk\_fabiostantos” or something like that. > > I met him once, but I’ve seen some of his work and he is really good with things like this. yea fabio is a good guy to amzing welder he has a stich weld AE and R33