# Request

**URL:** https://forums.speedlife.net/t/request/1808
**Category:** NYSpeed Automotive
**Created:** [August 25, 2005, 8:33pm UTC](https://forums.speedlife.net/t/request/1808 "2005-08-25T20:33:37Z")
**Posts on this page:** 7
**Page:** 1

<div class="post-metadata">

### Author: ![Daddie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/daddie/32/7621_2.png) [@Daddie](https://forums.speedlife.net/u/Daddie)
#### Post date: [August 25, 2005, 8:33pm UTC](https://forums.speedlife.net/t/request/1808/1 "2005-08-25T20:33:37Z")

</div>

Part number for :

studs and nut that go into the top middle two holes to where the exhaust mani bolts into the head…

4g63 6bolt

92 Galant VR4 if you really need it

spanx

---

<div class="post-metadata">

### Author: ![TurboTSi](https://avatars.discourse-cdn.com/v4/letter/t/22d042/32.png) [@TurboTSi](https://forums.speedlife.net/u/TurboTSi)
#### Post date: [August 25, 2005, 8:36pm UTC](https://forums.speedlife.net/t/request/1808/2 "2005-08-25T20:36:17Z")

</div>

Hybrid should have my old ones. I never got them back so they should be there somewhere.

---

<div class="post-metadata">

### Author: ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)
#### Post date: [August 25, 2005, 10:34pm UTC](https://forums.speedlife.net/t/request/1808/3 "2005-08-25T22:34:13Z")

</div>

jordan your old ones were broke into pieces damn near everyone any other one that was left over was tossed as they were shit

---

<div class="post-metadata">

### Author: ![Rx3](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rx3/32/7194_2.png) [@Rx3](https://forums.speedlife.net/u/Rx3)
#### Post date: [August 26, 2005, 1:19am UTC](https://forums.speedlife.net/t/request/1808/4 "2005-08-26T01:19:18Z")

</div>

If you have one of the existing bolts, take it to a hardware store that carries industrial hardware. They should have all the metric sizes you need, and be able to match the proper bolt length and thread with stronger than stock bolts at a better price. Other than that, use your DSM shop manual disk. There is a program called CAPS on the CD, install it, and run your VIN. Then you can pull up any part number same as the dealership.

---

<div class="post-metadata">

### Author: ![TurboTSi](https://avatars.discourse-cdn.com/v4/letter/t/22d042/32.png) [@TurboTSi](https://forums.speedlife.net/u/TurboTSi)
#### Post date: [August 26, 2005, 5:18am UTC](https://forums.speedlife.net/t/request/1808/5 "2005-08-26T05:18:37Z")

</div>

> [@Carnut](#):
>
> jordan your old ones were broke into pieces damn near everyone any other one that was left over was tossed as they were shit

^ ok

---

<div class="post-metadata">

### Author: ![Daddie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/daddie/32/7621_2.png) [@Daddie](https://forums.speedlife.net/u/Daddie)
#### Post date: [August 26, 2005, 6:18am UTC](https://forums.speedlife.net/t/request/1808/6 "2005-08-26T06:18:04Z")

</div>

Can anyone find out for me, i’m at work and my car is 20 miles away ☹

---

<div class="post-metadata">

### Author: ![Daddie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/daddie/32/7621_2.png) [@Daddie](https://forums.speedlife.net/u/Daddie)
#### Post date: [August 26, 2005, 12:42pm UTC](https://forums.speedlife.net/t/request/1808/7 "2005-08-26T12:42:57Z")

</div>

8X1.25X40

Thanks 🙂
