# resistors for my turbo setup
**URL:** https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053
**Category:** PittSpeed Automotive
**Created:** [June 22, 2006, 6:04pm UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053 "2006-06-22T18:04:49Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@wrayzor](https://forums.speedlife.net/u/wrayzor)
#### Post date: [June 22, 2006, 6:04pm UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053/1 "2006-06-22T18:04:49Z")
Any one have a good link for a good read on how to install/wire resistors
Im using DSM 450s
---
### Author:  [@Converted2LSX](https://forums.speedlife.net/u/Converted2LSX)
#### Post date: [June 22, 2006, 6:11pm UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053/2 "2006-06-22T18:11:16Z")
pm vwcabby16 (i think thats it) his name is sailor.
---
### Author:  [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)
#### Post date: [June 22, 2006, 6:13pm UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053/3 "2006-06-22T18:13:19Z")
I will call jeff tomarrow and inform him how to do it,
there is a plug in the drivers corner of your engine bay bunch of yellow wires, 4 of them go to the injectors u need to tap those 4 wires into 4 black wires of resistor box and the single wire going off the box its red i think goes to that plug, that plug is +12 volts and they are all commen
---
### Author:  [@Converted2LSX](https://forums.speedlife.net/u/Converted2LSX)
#### Post date: [June 22, 2006, 6:14pm UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053/4 "2006-06-22T18:14:23Z")
[http://www.honda-tech.com/zerothread?id=517274](http://www.honda-tech.com/zerothread?id=517274)
---
### Author:  [@wrayzor](https://forums.speedlife.net/u/wrayzor)
#### Post date: [June 22, 2006, 6:18pm UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053/5 "2006-06-22T18:18:59Z")
yea ive been looking up it for about an hour and i think i got it i just wanna make sure i understand it correctly
this plug on this box i got off ya is confusing me
thanks for the link
---
### Author:  [@wrayzor](https://forums.speedlife.net/u/wrayzor)
#### Post date: [June 22, 2006, 6:23pm UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053/6 "2006-06-22T18:23:50Z")
im gonna try and explain how i am understanding it rite now lemme kno if im rite or wrong
the four wires coming out of the +12 volt plug by the clutch master cylinder connect to the four black wires from the resistor box and then it runs through the box and works however it works and does its magic and then comes back out via the red wire and the red wire continues on into the same four yellow wires on the other side???
yes i may be retarded
---
### Author:  [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)
#### Post date: [June 23, 2006, 8:23am UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053/7 "2006-06-23T08:23:26Z")
> [@wrayzor](#):
>
> yes i may be retarded
:stick:
---
### Author:  [@wrayzor](https://forums.speedlife.net/u/wrayzor)
#### Post date: [June 23, 2006, 6:09pm UTC](https://forums.speedlife.net/t/resistors-for-my-turbo-setup/183053/8 "2006-06-23T18:09:10Z")
yea thnx joe lol i got it figured out tho did a lil more reading and talk to eric today bout it