# Ricer question

**URL:** <https://forums.speedlife.net/t/ricer-question/2660>\
**Category:** NYSpeed Automotive\
**Created:** [September 23, 2005, 5:45pm UTC](https://forums.speedlife.net/t/ricer-question/2660 "2005-09-23T17:45:12Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)\
**Post date:** [September 23, 2005, 5:45pm UTC](https://forums.speedlife.net/t/ricer-question/2660/1 "2005-09-23T17:45:12Z")

</div>

Anyone know of any website, or tutorials that would show how you would mount a body kit without screws.

And no I’m not mounting a bodykit, I wanted to appy the techniques for installing a snowpl…bodykit to fix the side cladding on my probe. It would appear they used some odd combination of square plastic clips, and a combo plastic/metal braket to hold the front down. Figured I might as well mold the cladding into the door.

---

<div class="post-metadata">

**Author:** ![Ovrwrkd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ovrwrkd/32/7586_2.png) [@Ovrwrkd](https://forums.speedlife.net/u/Ovrwrkd)\
**Post date:** [September 23, 2005, 5:47pm UTC](https://forums.speedlife.net/t/ricer-question/2660/2 "2005-09-23T17:47:41Z")

</div>

Plastic zip-ties? :gotme:

That’s about all I’ve got for not using screws.

---

<div class="post-metadata">

**Author:** ![Violator](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/violator/32/7278_2.png) [@Violator](https://forums.speedlife.net/u/Violator)\
**Post date:** [September 23, 2005, 5:57pm UTC](https://forums.speedlife.net/t/ricer-question/2660/3 "2005-09-23T17:57:27Z")

</div>

double sided foam tape is very strong… thats what some trim is held in place with. Buy brand name quality only. 3M . Dupont…ect… Area must be clean and grime free… ACETONE. Edges/ends REQUIRE a screw

---

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [September 23, 2005, 6:09pm UTC](https://forums.speedlife.net/t/ricer-question/2660/4 "2005-09-23T18:09:26Z")

</div>

ive seen the probe …therefor my recomendation is 2 part epoxy

---

<div class="post-metadata">

**Author:** ![Bacon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bacon/32/7230_2.png) [@Bacon](https://forums.speedlife.net/u/Bacon)\
**Post date:** [September 23, 2005, 7:55pm UTC](https://forums.speedlife.net/t/ricer-question/2660/5 "2005-09-23T19:55:50Z")

</div>

> [@HotRodKid](#):
>
> ive seen the probe …therefor my recomendation is 2 part epoxy

That is your recommendation for everything. 😛

Then again that might work, asides from drilling through the door to run bolt through the door. And mount the studs on the reverse side or the panel.