# Rim fitment
**URL:** https://forums.speedlife.net/t/rim-fitment/157607
**Category:** SON240sx Automotive
**Created:** [July 8, 2010, 5:45pm UTC](https://forums.speedlife.net/t/rim-fitment/157607 "2010-07-08T17:45:11Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@blankets3](https://forums.speedlife.net/u/blankets3)
#### Post date: [July 8, 2010, 5:45pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/1 "2010-07-08T17:45:11Z")
Will my oem set of mazda rims fit on 240sx with a 5 lug swap
```
Wheel specs:
17"
Width - 6.5 inches
Offset - 52.5mm
Tire size - P205/50R17
Bolt pattern - 5x114.3
Center bore - 57.1 mm
```
im just going to be using them to drive the car home.
---
### Author:  [@SaNTi](https://forums.speedlife.net/u/SaNTi)
#### Post date: [July 8, 2010, 5:52pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/2 "2010-07-08T17:52:31Z")
They will look like **asshole**. Narrow ass wheels with terrible offsets. Don’t even bother, dude.
---
### Author:  [@d240](https://forums.speedlife.net/u/d240)
#### Post date: [July 8, 2010, 5:56pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/3 "2010-07-08T17:56:20Z")
go to 1010 tire on the web and use the tire comparison it works great-it will tell you the actual height in inches of any tire and rim size combo-check it out -you can compare the stock size to your intended size-I myself run 215/45/17 on my stock hatch
---
### Author:  [@blankets3](https://forums.speedlife.net/u/blankets3)
#### Post date: [July 8, 2010, 6:00pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/4 "2010-07-08T18:00:48Z")
i just gotta get the car from point A to point B… looks dont matter i just gotta get the car home 1st
---
### Author:  [@Philly](https://forums.speedlife.net/u/Philly)
#### Post date: [July 8, 2010, 6:04pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/5 "2010-07-08T18:04:25Z")
Honestly I dunno about an s13, but I’m pretty sure on an S14 youd be rubbing on the strut tower or be too close for comfort.
---
### Author:  [@white240](https://forums.speedlife.net/u/white240)
#### Post date: [July 8, 2010, 6:16pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/6 "2010-07-08T18:16:23Z")
yeah, that offset is brutaaaaal. Thats high even for a civic. Depending on wheel design, you might be rubbing hard. You can’t find some stock s14 wheels? Those would be a huuuge improvement.
---
### Author:  [@MP\_B240](https://forums.speedlife.net/u/MP_B240)
#### Post date: [July 8, 2010, 6:21pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/7 "2010-07-08T18:21:32Z")
^ lol, i was just going to say that even for a honda that sucks. look at the wheel fitment thread on here for some ideas on how different sizes look, or just google shit, find pictures of fitment you like, and find out what it is.
---
### Author:  [@blankets3](https://forums.speedlife.net/u/blankets3)
#### Post date: [July 8, 2010, 6:39pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/8 "2010-07-08T18:39:36Z")
sir are you high or just didnt read the thread?
im only putting on somethign to get the car home… the rims are from my mazda 3 (the oem ones) and once i get it here im ordering some gram lights 57pros
oh, also
57.1 mm center bore
---
### Author:  [@white240](https://forums.speedlife.net/u/white240)
#### Post date: [July 8, 2010, 6:44pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/9 "2010-07-08T18:44:10Z")
> [@blankets3](#):
>
> sir are you high or just didnt read the thread?
>
> im only putting on somethign to get the car home… the rims are from my mazda 3 (the oem ones) and once i get it here im ordering some gram lights 57pros
>
> oh, also
>
> 57.1 mm center bore
Are you high? no where in the first post does it say that. You referred to rim fitment.
I’m sure it doesn’t belong here and i dunno where else to put it\*\*\*
> "17-inch
> Width - 6.5 inches
> Offset - 52.5mm
> Tire size - P205/50R17
> Bolt pattern - 5x114.3
> Will they fit on a 240 with 5 lug done, i just wanna make sure before i go to pick up a car n put them on and look like a complete asshat."
---
### Author:  [@SaNTi](https://forums.speedlife.net/u/SaNTi)
#### Post date: [July 8, 2010, 6:44pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/10 "2010-07-08T18:44:35Z")
I miss understood you. Thought you wanted to buy wheels and wanted to know what they would look like before buying them.
---
### Author:  [@blankets3](https://forums.speedlife.net/u/blankets3)
#### Post date: [July 8, 2010, 6:48pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/11 "2010-07-08T18:48:57Z")
okay well lets all start over then…
Will my oem set of mazda rims fit on 240sx with a 5 lug swap
Wheel specs:
17"
Width - 6.5 inches
Offset - 52.5mm
Tire size - P205/50R17
Bolt pattern - 5x114.3
Center bore - 57.1 mm
better? sry for all the confusion i thought i was making sense
---
### Author:  [@Philly](https://forums.speedlife.net/u/Philly)
#### Post date: [July 8, 2010, 6:55pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/12 "2010-07-08T18:55:05Z")
no
---
### Author:  [@BRA\_GANZAAAAAA](https://forums.speedlife.net/u/BRA_GANZAAAAAA)
#### Post date: [July 8, 2010, 7:03pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/13 "2010-07-08T19:03:00Z")
> [@blankets3"](#):
>
> Will my oem set of mazda rims fit on 240sx with a 5 lug swap
>
> ```
> Wheel specs:
>
> 17"
> Width - 6.5 inches
> Offset - 52.5mm
> Tire size - P205/50R17
> Bolt pattern - 5x114.3
> Center bore - 57.1 mm
>
> ```
>
> im just going to be using them to drive the car home.
lol why don’t u just bolt them on!
---
### Author:  [@blankets3](https://forums.speedlife.net/u/blankets3)
#### Post date: [July 8, 2010, 7:07pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/14 "2010-07-08T19:07:44Z")
cuz the cars in waterloo and im in hamilton, i dont wanna cram 8 rims in my car and test fit…
---
### Author:  [@rmallari](https://forums.speedlife.net/u/rmallari)
#### Post date: [July 8, 2010, 8:46pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/15 "2010-07-08T20:46:01Z")
240sx centre hub bore is 66mm…so no, 57mm bore wheels wont fit
and offset…+52 is pretty high…may not clear calipers/strut?
---
### Author:  [@team\_DA](https://forums.speedlife.net/u/team_DA)
#### Post date: [July 8, 2010, 10:22pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/16 "2010-07-08T22:22:36Z")
Im sure you can buy a set of oem 240sx rims for under 100 bux.
---
### Author:  [@blankets3](https://forums.speedlife.net/u/blankets3)
#### Post date: [July 8, 2010, 10:29pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/17 "2010-07-08T22:29:54Z")
anyone selling ? 🙂
---
### Author:  [@89\_coupe](https://forums.speedlife.net/u/89_coupe)
#### Post date: [July 8, 2010, 10:48pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/18 "2010-07-08T22:48:25Z")
ive got 4 teardrop rims. all have rubber but 2 have slow leaks cuz the sidewalls are cracked
---
### Author:  [@blankets3](https://forums.speedlife.net/u/blankets3)
#### Post date: [July 8, 2010, 10:54pm UTC](https://forums.speedlife.net/t/rim-fitment/157607/19 "2010-07-08T22:54:54Z")
ppl dont actually buy that kinda stuff do they… i would be embarrassed to sell that lol
---
### Author:  [@jzavalinsk](https://forums.speedlife.net/u/jzavalinsk)
#### Post date: [July 9, 2010, 5:29am UTC](https://forums.speedlife.net/t/rim-fitment/157607/20 "2010-07-09T05:29:14Z")
Then tow the car home
[Next page](https://forums.speedlife.net/t/rim-fitment/157607.md?page=2)