# Rim FITment
**URL:** https://forums.speedlife.net/t/rim-fitment/99516
**Category:** SON240sx Automotive
**Created:** [September 3, 2006, 9:18am UTC](https://forums.speedlife.net/t/rim-fitment/99516 "2006-09-03T09:18:23Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@Acidz](https://forums.speedlife.net/u/Acidz)
#### Post date: [September 3, 2006, 9:18am UTC](https://forums.speedlife.net/t/rim-fitment/99516/1 "2006-09-03T09:18:23Z")
Would These Rims Fit On My 240sx???
Konig Absolute Wheel 17x7 5x100/114.3 Opal
I had them on my sunfire before (Front Wheel Drive)
Does is matter that these rims where on a FWD car can it be put on a RWD or FWD??
Thanks
---
### Author:  [@Acidz](https://forums.speedlife.net/u/Acidz)
#### Post date: [September 3, 2006, 9:41am UTC](https://forums.speedlife.net/t/rim-fitment/99516/2 "2006-09-03T09:41:22Z")
i have never bought rims before but when u buy them for example how i have the
Konig Absolute Wheel 17x7 5x100/114.3
Do u have to pick 5x100 or 5x114.3 when u buy them or does that mean it works for 5x100 & 5x114.3 ???
---
### Author:  [@koz](https://forums.speedlife.net/u/koz)
#### Post date: [September 3, 2006, 9:53am UTC](https://forums.speedlife.net/t/rim-fitment/99516/3 "2006-09-03T09:53:26Z")
it means the wheel is dual bolt pattern… it will fit both.
here’s a good reference for bolt patterns of different vehicles:
[http://www.son240sx.ca/forum/viewtopic.php?t=3874&highlight=bolt+pattern+dodge](http://www.son240sx.ca/forum/viewtopic.php?t=3874&highlight=bolt+pattern+dodge)
your main concern should be the offset off the wheel… the lower the better.
---
### Author:  [@Acidz](https://forums.speedlife.net/u/Acidz)
#### Post date: [September 3, 2006, 9:58am UTC](https://forums.speedlife.net/t/rim-fitment/99516/4 "2006-09-03T09:58:40Z")
because my step father started going off to tell me that i can put those rims on because it was for a FWD blah blah but so whatever i guess if it fits and says it will work with the car shouldnt be a prob then…
---
### Author:  [@sidewayz240](https://forums.speedlife.net/u/sidewayz240)
#### Post date: [September 3, 2006, 11:03am UTC](https://forums.speedlife.net/t/rim-fitment/99516/5 "2006-09-03T11:03:42Z")
They will fit, but like you said these wheels are designed for a FWD car which require Alot higher offset to be “flush”. These wheels on your 240 will be sunken quite alot as i assume the offset is somewhere around 40, the fitment on these will be close to stock wheel fitment. You will also proably need to run ~10mm spacer to clear coils if you have them, which will make the fitment a bit better as well.
---
### Author:  [@Acidz](https://forums.speedlife.net/u/Acidz)
#### Post date: [September 3, 2006, 11:59am UTC](https://forums.speedlife.net/t/rim-fitment/99516/6 "2006-09-03T11:59:36Z")
o ok…well im goona be putting my car away for the season so i only really need these on for like about a 20-30min drive… my rear tires that i have now are done…and 1 is leaking air and i thought might as well put it away for the season and start buyin parts for next season and also save on insurance since it will go down with only fire and theft on it…
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [September 3, 2006, 12:21pm UTC](https://forums.speedlife.net/t/rim-fitment/99516/7 "2006-09-03T12:21:23Z")
Doesn’t sound like they are going to fit nicely.