# roh rimz **URL:** \ **Category:** SON240sx Automotive\ **Created:** [February 1, 2006, 12:04pm UTC](https://forums.speedlife.net/t/roh-rimz/92452 "2006-02-01T12:04:26Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![trinituner](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trinituner/32/5523_2.png) [@trinituner](https://forums.speedlife.net/u/trinituner)\ **Post date:** [February 1, 2006, 12:04pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/1 "2006-02-01T12:04:26Z")
hey guyz heres the problem, i picked up a set of rims from a guy , he had some roh deep dish on his car, he had an acident in the front and the front rims are toast,so he told me the bolt pattern were the same as my 240, i have a 92, his car was an old rx7, so i got the rims and they dont fit , they are 4 bolt but they are off by a little bit, io think they are 4x100 bolt pattern, now these rims are 8" wide and are deep, they are good if u want to drag race, ? how do i get them to fit, should i drill them over to fit or drill the holes bigger, or sell them off to some honda guy!! lolz if u want to see what they look like take a look at blu240 post with testing waters with ROH 17 …( something like that) neways ilike these rims, tell me how i would get them to fit!!! thanks ---
**Author:** ![BAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bas/32/5540_2.png) [@BAS](https://forums.speedlife.net/u/BAS)\ **Post date:** [February 1, 2006, 1:28pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/2 "2006-02-01T13:28:07Z")
FB is 4x110 the only cars of any volume that would be interested are older 80’s, 4 bolt mustangs and other SA/FB owners. good luck it’s not a common PCD now . ---
**Author:** ![spd-dmn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spd-dmn/32/5513_2.png) [@spd-dmn](https://forums.speedlife.net/u/spd-dmn)\ **Post date:** [February 1, 2006, 1:55pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/3 "2006-02-01T13:55:09Z")
4bolt mustangs are 108mm ---
**Author:** ![Petey](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@Petey](https://forums.speedlife.net/u/Petey)\ **Post date:** [February 1, 2006, 2:30pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/4 "2006-02-01T14:30:40Z")
Just about all civics are 4x100 ---
**Author:** ![BAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bas/32/5540_2.png) [@BAS](https://forums.speedlife.net/u/BAS)\ **Post date:** [February 1, 2006, 4:53pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/5 "2006-02-01T16:53:42Z")
all FB’s are 4x110 except the 85 SE which is 4x114.3 I know thier is an ( ~ 85’ ? ) mustang with a 4x110 bolt pattern because the FB guys use them ALL the time… 4x108 is modern Focus PCD but I have no idea when the mustang went to 108 PCD ---
**Author:** ![trinituner](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trinituner/32/5523_2.png) [@trinituner](https://forums.speedlife.net/u/trinituner)\ **Post date:** [February 1, 2006, 5:20pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/6 "2006-02-01T17:20:44Z")
thanks guys, my friend told me the same, older 4 bolt mustang guys used these rims alot, the rx7 it came of was an old one, it had pop up lights, donno wat year it is but hey, i want to use these rims, i might drill new holes or something donno yet, open for advice… ---
**Author:** ![blu2fourty](https://avatars.discourse-cdn.com/v4/letter/b/9fc348/32.png) [@blu2fourty](https://forums.speedlife.net/u/blu2fourty)\ **Post date:** [February 1, 2006, 5:21pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/7 "2006-02-01T17:21:12Z")
you would have to redrill new holes. they are nice looking rims 8) ---
**Author:** ![BAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bas/32/5540_2.png) [@BAS](https://forums.speedlife.net/u/BAS)\ **Post date:** [February 1, 2006, 8:47pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/8 "2006-02-01T20:47:42Z")
they ALL had/have pop up lights… but since they don’t fit your 4 bolt then they are the SA/FB 4x110’s. ---
**Author:** ![trinituner](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trinituner/32/5523_2.png) [@trinituner](https://forums.speedlife.net/u/trinituner)\ **Post date:** [February 2, 2006, 5:30am UTC](https://forums.speedlife.net/t/roh-rimz/92452/9 "2006-02-02T05:30:54Z")
hey thanks guys for ur input, blu240\>\> yes indeed ther are nice rims, u have them so u know wat i mean, am for BAS and everyone else thanks for the advice, am, i might just go ahead and re drill new holes, newayz thanks guyz sean ---
**Author:** ![spilner](https://avatars.discourse-cdn.com/v4/letter/s/f17d59/32.png) [@spilner](https://forums.speedlife.net/u/spilner)\ **Post date:** [February 2, 2006, 7:58am UTC](https://forums.speedlife.net/t/roh-rimz/92452/10 "2006-02-02T07:58:43Z")
what the hellz a rimz?? 240z arent the zame az rx-7z, 4/5 x 114.3 and 5 x 100 ---
**Author:** ![BAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bas/32/5540_2.png) [@BAS](https://forums.speedlife.net/u/BAS)\ **Post date:** [February 2, 2006, 10:19am UTC](https://forums.speedlife.net/t/roh-rimz/92452/11 "2006-02-02T10:19:52Z")
WTH is that ^^ actually trying to say… get off the crack. ---
**Author:** ![TorontoGT-R33](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/torontogt-r33/32/5500_2.png) [@TorontoGT-R33](https://forums.speedlife.net/u/TorontoGT-R33)\ **Post date:** [February 2, 2006, 2:18pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/12 "2006-02-02T14:18:07Z")
> [@spilner](#): > > what the hellz a rimz?? 240z arent the zame az rx-7z, 4/5 x 114.3 and 5 x 100 I think he is trying make it sound like he is speaking in his sleepZzzzzz Tinitunerzzzz you should get the wholes redrilled to the right specification for your car. Have if done professionally at a rim shop so the measurements are dead on otherwise if you screw it up by doing it your self you will be opening up a new can of worms, so spend a little extra and get it done properlyzzzzzz. ---
**Author:** ![dip](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dip/32/5479_2.png) [@dip](https://forums.speedlife.net/u/dip)\ **Post date:** [February 2, 2006, 4:44pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/13 "2006-02-02T16:44:28Z")
FC center bore is FAR smaller than teh s chassis’s fb adn fc wheels will not fit at all ---
**Author:** ![blu2fourty](https://avatars.discourse-cdn.com/v4/letter/b/9fc348/32.png) [@blu2fourty](https://forums.speedlife.net/u/blu2fourty)\ **Post date:** [February 2, 2006, 5:52pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/14 "2006-02-02T17:52:21Z")
use spacers to fix the bore problem? ---
**Author:** ![BAS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bas/32/5540_2.png) [@BAS](https://forums.speedlife.net/u/BAS)\ **Post date:** [February 2, 2006, 8:06pm UTC](https://forums.speedlife.net/t/roh-rimz/92452/15 "2006-02-02T20:06:51Z")
huh didn’t even think of the hub center being smaller. however you can get termocomposite hubcentric spacers to fill that gap properly for like $20.