# ROTORA BBK 330mmx30mm 4 pot **URL:** \ **Category:** Classifieds\ **Created:** [February 4, 2014, 3:58pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752 "2014-02-04T15:58:21Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![hoggie](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@hoggie](https://forums.speedlife.net/u/hoggie)\ **Post date:** [February 4, 2014, 3:58pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/1 "2014-02-04T15:58:21Z")
Hey guys for sale is a set of front rotora BBK 13inch. very low milage. pads have 90% life on it. it will need a set of rotor rings replaced. i want to move onto a bigger set of BBK. bought these from a owner who used it for 2000km and took them off stored the rotor in a upside position gravity caused the rotor to warped over time rotors should be stored flat on the ground, i had it machined lasted last summer it was great near the end of summer it gave up and warped again. currently installed in my R32 GTR asking $1000 obo no rush to sale reasonable offer only. this bbk all over the web retails for almost $2000s new not including shipping, taxes, duties. $900 OBO will fit S13 and s14 with 5 lug set up. pm is the key ![http://i915.photobucket.com/albums/ac358/jackazzjack/IMG_2457_zps5e394472.jpg](http://i915.photobucket.com/albums/ac358/jackazzjack/IMG_2457_zps5e394472.jpg) ---
**Author:** ![fullboost](https://avatars.discourse-cdn.com/v4/letter/f/22d042/32.png) [@fullboost](https://forums.speedlife.net/u/fullboost)\ **Post date:** [February 6, 2014, 3:14pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/2 "2014-02-06T15:14:21Z")
Are the discs still avail? Clear 17 inch? ---
**Author:** ![hoggie](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@hoggie](https://forums.speedlife.net/u/hoggie)\ **Post date:** [February 6, 2014, 3:26pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/3 "2014-02-06T15:26:17Z")
yes clears 17 inch wheels ---
**Author:** ![Nissan\_Crazy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nissan_crazy/32/5775_2.png) [@Nissan\_Crazy](https://forums.speedlife.net/u/Nissan_Crazy)\ **Post date:** [February 8, 2014, 1:49pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/4 "2014-02-08T13:49:57Z")
This is such a nice brake kit man!Glws ---
**Author:** ![hoggie](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@hoggie](https://forums.speedlife.net/u/hoggie)\ **Post date:** [February 9, 2014, 8:20pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/5 "2014-02-09T20:20:36Z")
^ thx, some good stopping power too ---
**Author:** ![crunkride](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crunkride/32/5783_2.png) [@crunkride](https://forums.speedlife.net/u/crunkride)\ **Post date:** [February 12, 2014, 9:43am UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/6 "2014-02-12T09:43:26Z")
> [@hoggie"](#): > > bought these from a owner who used it for 2000km and took them off stored the rotor in a upside position gravity caused the rotor to warped over time rotors should be stored flat on the ground, i had it machined lasted last summer it was great near the end of summer it gave up and warped again. This is strange…are you sure it isn’t the suspending hardware that is now bad because of laying them like that? Are you sure they were broken in correctly? I highly doubt you are going to warp that disc just from storing like that. I would grab a height gauge and measure the clips - maybe that’s all you need - just a recommendation. ---
**Author:** ![hoggie](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@hoggie](https://forums.speedlife.net/u/hoggie)\ **Post date:** [February 12, 2014, 4:15pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/7 "2014-02-12T16:15:13Z")
what do you mean suspending hardware? like the rotor hat? the caliper itself? ---
**Author:** ![hoggie](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@hoggie](https://forums.speedlife.net/u/hoggie)\ **Post date:** [April 18, 2014, 4:02pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/8 "2014-04-18T16:02:26Z")
bump $900 obo price drop ---
**Author:** ![crunkride](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crunkride/32/5783_2.png) [@crunkride](https://forums.speedlife.net/u/crunkride)\ **Post date:** [April 21, 2014, 10:05am UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/9 "2014-04-21T10:05:39Z")
> [@hoggie](#): > > what do you mean suspending hardware? like the rotor hat? the caliper itself? Yes, the clips that enable the rotor to ‘float’ suspending it from the hat. If they were upside down, like you said, the weight of the rotor may have compressed the clips, as opposed to the rotor itself warping under it’s own weight. Just a thought - you are right, they should have been stored rotor down, either way. ---
**Author:** ![hoggie](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@hoggie](https://forums.speedlife.net/u/hoggie)\ **Post date:** [April 29, 2014, 6:48pm UTC](https://forums.speedlife.net/t/rotora-bbk-330mmx30mm-4-pot/234752/10 "2014-04-29T18:48:24Z")
^ no idea…better buy it and find out for yourself cuz im no expert. but all you really need is the rotor rings replaced thats it 🙂