# RPM going down

**URL:** https://forums.speedlife.net/t/rpm-going-down/101904
**Category:** SON240sx Automotive
**Created:** [November 21, 2006, 11:25pm UTC](https://forums.speedlife.net/t/rpm-going-down/101904 "2006-11-21T23:25:43Z")
**Posts on this page:** 8
**Page:** 1

<div class="post-metadata">

### Author: ![Dxero](https://avatars.discourse-cdn.com/v4/letter/d/db5fbb/32.png) [@Dxero](https://forums.speedlife.net/u/Dxero)
#### Post date: [November 21, 2006, 11:25pm UTC](https://forums.speedlife.net/t/rpm-going-down/101904/1 "2006-11-21T23:25:43Z")

</div>

Alright didn’t know how to call the topic. The car is a 1990 auto 240sx. My current problem is whenever I’m at a full stop (ie red light) and then as I step on my gas pedal, my rpm dips down. Dips down to 500 or even less. On rare occasions, it would dip down so low it would shut my engine down. The car is running rich if that any helps. I’ve been trying to figure out what the problem is before more snow falls.

Also…my belts are squeling a hell lot. I’ve already tightened them but it seems to keep doing it a lower rpm.

Thanks for all your help.

Dave

---

<div class="post-metadata">

### Author: ![snowboard\_240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/snowboard_240sx/32/5519_2.png) [@snowboard\_240sx](https://forums.speedlife.net/u/snowboard_240sx)
#### Post date: [November 22, 2006, 4:40am UTC](https://forums.speedlife.net/t/rpm-going-down/101904/2 "2006-11-22T04:40:17Z")

</div>

get some new belts and go from there…

---

<div class="post-metadata">

### Author: ![Dxero](https://avatars.discourse-cdn.com/v4/letter/d/db5fbb/32.png) [@Dxero](https://forums.speedlife.net/u/Dxero)
#### Post date: [November 22, 2006, 7:15am UTC](https://forums.speedlife.net/t/rpm-going-down/101904/3 "2006-11-22T07:15:42Z")

</div>

anyone willing to change belts for me? ofcourse I’ll pay. I just dont know how to change it properly, and it’s my only and I need it to get to work :S

---

<div class="post-metadata">

### Author: ![snowboard\_240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/snowboard_240sx/32/5519_2.png) [@snowboard\_240sx](https://forums.speedlife.net/u/snowboard_240sx)
#### Post date: [November 22, 2006, 7:56am UTC](https://forums.speedlife.net/t/rpm-going-down/101904/4 "2006-11-22T07:56:44Z")

</div>

i could help u but where are u located im in milton…

---

<div class="post-metadata">

### Author: ![Dxero](https://avatars.discourse-cdn.com/v4/letter/d/db5fbb/32.png) [@Dxero](https://forums.speedlife.net/u/Dxero)
#### Post date: [November 22, 2006, 9:14am UTC](https://forums.speedlife.net/t/rpm-going-down/101904/5 "2006-11-22T09:14:32Z")

</div>

yea that’s far…anyone closer? i’m at the port union and lawrence area

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [November 23, 2006, 7:26pm UTC](https://forums.speedlife.net/t/rpm-going-down/101904/6 "2006-11-23T19:26:49Z")

</div>

MAF?

---

<div class="post-metadata">

### Author: ![Luis240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luis240sx/32/5530_2.png) [@Luis240sx](https://forums.speedlife.net/u/Luis240sx)
#### Post date: [November 24, 2006, 7:35am UTC](https://forums.speedlife.net/t/rpm-going-down/101904/7 "2006-11-24T07:35:09Z")

</div>

i have a similar problem like that as well, mine is idel control valve, just needs a good cleaning, but haved had time, it could also be the diff locks up when ur stopped that also happens to me, but mine is a 5spd dunno about auto

---

<div class="post-metadata">

### Author: ![D\_Fresh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/d_fresh/32/5542_2.png) [@D\_Fresh](https://forums.speedlife.net/u/D_Fresh)
#### Post date: [November 24, 2006, 2:10pm UTC](https://forums.speedlife.net/t/rpm-going-down/101904/8 "2006-11-24T14:10:31Z")

</div>

yea mine does that too. dunno what the problem is tho and i dont really care…the motors coming out soon anyways.
