# RPM slow?

**URL:** <https://forums.speedlife.net/t/rpm-slow/126112>\
**Category:** SON240sx Automotive\
**Created:** [July 9, 2009, 10:39am UTC](https://forums.speedlife.net/t/rpm-slow/126112 "2009-07-09T10:39:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tarz](https://avatars.discourse-cdn.com/v4/letter/t/43a26b/32.png) [@Tarz](https://forums.speedlife.net/u/Tarz)\
**Post date:** [July 9, 2009, 10:39am UTC](https://forums.speedlife.net/t/rpm-slow/126112/1 "2009-07-09T10:39:46Z")

</div>

so i changed my RPM on my SOHC hud and it was working then i tryed to switch the face plate and now the needle is kinda messed up is there a specail way to to it back together?

---

<div class="post-metadata">

**Author:** ![DJPyro](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@DJPyro](https://forums.speedlife.net/u/DJPyro)\
**Post date:** [July 9, 2009, 11:07am UTC](https://forums.speedlife.net/t/rpm-slow/126112/2 "2009-07-09T11:07:32Z")

</div>

You probably pushed the needle on too far, try pulling it out a little bit and see if that fixes it.