# rydin hella wide and burnin paint **URL:** \ **Category:** Shift518 Automotive\ **Created:** [November 16, 2010, 9:11pm UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601 "2010-11-16T21:11:56Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [November 16, 2010, 9:11pm UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/1 "2010-11-16T21:11:56Z")
so yea i burned thru my paint on one side of the tdi. i dont want it to rust, what should i do. cheap, cost effective way… i was thinkin, my neighbor has some por 15… should i just grab a qtip and dab it in where it melted the paint off to stop from rusting. painting is not an option. it really isn’t tooooo bad. ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [November 16, 2010, 9:14pm UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/2 "2010-11-16T21:14:47Z")
yes to por15. It’s just going to wear off again next year (or this year if you’re still that low) ---
**Author:** ![AMD\_IS\_THE\_BEST](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/amd_is_the_best/32/6342_2.png) [@AMD\_IS\_THE\_BEST](https://forums.speedlife.net/u/AMD_IS_THE_BEST)\ **Post date:** [November 16, 2010, 9:16pm UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/3 "2010-11-16T21:16:01Z")
Install widebody. ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [November 16, 2010, 9:16pm UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/4 "2010-11-16T21:16:12Z")
ok, yea and its back up to cup kit ride height… i’ll take a pic tomm of how terrible the car looks… funny how a set of RC’s make the car look hella fly ---
**Author:** ![GATVILLE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatville/32/6362_2.png) [@GATVILLE](https://forums.speedlife.net/u/GATVILLE)\ **Post date:** [November 16, 2010, 9:44pm UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/5 "2010-11-16T21:44:32Z")
dont por 15 it, it tends to peel off if applied to bare metal, unless its meticulously prepped, then its still likely to peel, lol. why not just hit it with touchup paint? ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [November 16, 2010, 10:46pm UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/6 "2010-11-16T22:46:54Z")
Ok, here’s a few fun facts about por15. It shouldn’t be applied at a very smooth surface, it won’t adhere well. It shouldn’t be used where it can be exposed to sunlight, the uv will break it down ---
**Author:** ![GATVILLE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gatville/32/6362_2.png) [@GATVILLE](https://forums.speedlife.net/u/GATVILLE)\ **Post date:** [November 16, 2010, 11:24pm UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/7 "2010-11-16T23:24:48Z")
^ unless properly topcoated with…a por-15 topcoat, or por-15 primer then a topcoat of your choice. Really what it comes down to is dont use por-15 unless your going over some kind of rust. It needs to be able to bite to something to be as tough as they claim. ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [November 17, 2010, 4:30am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/8 "2010-11-17T04:30:26Z")
If you use por-15 on bare metal you need to use Por-15 Prep and Ready first. ---
**Author:** ![Boost\_Creep](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boost_creep/32/6366_2.png) [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)\ **Post date:** [November 17, 2010, 6:22am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/9 "2010-11-17T06:22:30Z")
How the fuck did you burn through the paint on your TDI? ---
**Author:** ![K20power](https://avatars.discourse-cdn.com/v4/letter/k/41988e/32.png) [@K20power](https://forums.speedlife.net/u/K20power)\ **Post date:** [November 17, 2010, 6:24am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/10 "2010-11-17T06:24:21Z")
> [@Boost Creep"](#): > > How the fuck did you burn through the paint on your TDI? Tires rubbing from being spaced out and low BRYAN ---
**Author:** ![Boost\_Creep](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boost_creep/32/6366_2.png) [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)\ **Post date:** [November 17, 2010, 6:28am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/11 "2010-11-17T06:28:12Z")
> [@K20power"](#): > > Tires rubbing from being spaced out and low BRYAN Oh I thought he got a Wyan Kwamah detail jobber. ---
**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\ **Post date:** [November 17, 2010, 7:31am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/12 "2010-11-17T07:31:43Z")
:rofl ^^ ---
**Author:** ![tdi\_logik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tdi_logik/32/6310_2.png) [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)\ **Post date:** [November 17, 2010, 8:20am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/13 "2010-11-17T08:20:23Z")
so what should i do ---
**Author:** ![AUDI\_JAY](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@AUDI\_JAY](https://forums.speedlife.net/u/AUDI_JAY)\ **Post date:** [November 17, 2010, 8:22am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/14 "2010-11-17T08:22:05Z")
take it to northeast it won’t cost much to fix the right way ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [November 17, 2010, 8:38am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/15 "2010-11-17T08:38:09Z")
Dont raise it and let it rub. It will never rust. ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [November 17, 2010, 8:40am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/16 "2010-11-17T08:40:50Z")
> [@AUDI\_JAY"](#): > > take it to northeast it won’t cost much to fix the right way reading is fundemental. ---
**Author:** ![AUDI\_JAY](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@AUDI\_JAY](https://forums.speedlife.net/u/AUDI_JAY)\ **Post date:** [November 17, 2010, 8:44am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/17 "2010-11-17T08:44:00Z")
> [@Mk4 30R"](#): > > reading is fundemental. Fawk i guess i need to brush up on my hooked on phonics ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [November 17, 2010, 8:46am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/18 "2010-11-17T08:46:21Z")
well, he clearly said paint work IS NOT and option in the OP. ---
**Author:** ![AUDI\_JAY](https://avatars.discourse-cdn.com/v4/letter/a/898d66/32.png) [@AUDI\_JAY](https://forums.speedlife.net/u/AUDI_JAY)\ **Post date:** [November 17, 2010, 8:50am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/19 "2010-11-17T08:50:59Z")
> [@07 Z06 and 08 Viper comparison](https://forums.speedlife.net/t/07-z06-and-08-viper-comparison/37245/13): > > well, he clearly said paint work IS NOT and option in the OP. lol I saw that after your post. But imo if you want want to fix it do it right why half ass it if you want to keep car for awhile. ---
**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\ **Post date:** [November 17, 2010, 8:59am UTC](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601/20 "2010-11-17T08:59:07Z")
Stay low, let it burn kidd [Next page](https://forums.speedlife.net/t/rydin-hella-wide-and-burnin-paint/255601.md?page=2)