# (S13) 300zx rear brakes draging?? **URL:** \ **Category:** SON240sx Automotive\ **Created:** [July 22, 2009, 11:45pm UTC](https://forums.speedlife.net/t/s13-300zx-rear-brakes-draging/126493 "2009-07-22T23:45:15Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![SRI\_Motorsports](https://avatars.discourse-cdn.com/v4/letter/s/e5b9ba/32.png) [@SRI\_Motorsports](https://forums.speedlife.net/u/SRI_Motorsports)\ **Post date:** [July 22, 2009, 11:45pm UTC](https://forums.speedlife.net/t/s13-300zx-rear-brakes-draging/126493/1 "2009-07-22T23:45:15Z")
Hey guys. I have a 1992 S13. Just recently did the rear swap. Everything went together perfectly. (I have when off the brakes) a draging noise and when I apply the brakes they work but still have the sound. I believe its on both sides. Believed to be the inside pads. Do I need the shave some matterial off the calipers or add a spacer of some sort to stop the grinding? I have the 300zx rotors that were re-drilled for the 4 bolt pattern. I appreciate any suggestions. Thanks in advance. I have a hydro e-brake that isnt connected yet so the e-brake possibility is out of the question ---
**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\ **Post date:** [July 23, 2009, 4:59am UTC](https://forums.speedlife.net/t/s13-300zx-rear-brakes-draging/126493/2 "2009-07-23T04:59:14Z")
how clean were your pins that your pads ride on? all pressure clips used? the geometry is the same for the 300zx so I don’t think a spacer is the ticket ---
**Author:** ![SRI\_Motorsports](https://avatars.discourse-cdn.com/v4/letter/s/e5b9ba/32.png) [@SRI\_Motorsports](https://forums.speedlife.net/u/SRI_Motorsports)\ **Post date:** [July 23, 2009, 6:04pm UTC](https://forums.speedlife.net/t/s13-300zx-rear-brakes-draging/126493/3 "2009-07-23T18:04:54Z")
Everything is shiney brand new. The hold down clip was used as well. Maybe I need to slightly shave 10 to 20 thousands off the inside pad?