# S13 ABS VLSD Drive shaft **URL:** \ **Category:** Classifieds\ **Created:** [March 30, 2009, 5:03pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083 "2009-03-30T17:03:17Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 30, 2009, 5:03pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/1 "2009-03-30T17:03:17Z")
Now, I am in need of a drive shaft in VERY good shape. U-joints must be amazing as well as the rubber insulator by the output shaft at the transmission. PM or reply here please. ---
**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\ **Post date:** [March 30, 2009, 5:16pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/2 "2009-03-30T17:16:29Z")
for abs and non abs the only difference is the front 12inch section, so you could buy either abs or non abs and swap your front section on. i have one you can have for free ill just have to check if the carrier bearing is any good let me know if your interested and ill check ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 30, 2009, 5:19pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/3 "2009-03-30T17:19:22Z")
definetley interested. abs or non? ---
**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\ **Post date:** [March 30, 2009, 5:21pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/4 "2009-03-30T17:21:22Z")
k hold on ill check give me 10 mins ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 30, 2009, 5:22pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/5 "2009-03-30T17:22:23Z")
no rush dude. i can pick it up weds or any day after thats good for you. ---
**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\ **Post date:** [March 30, 2009, 5:41pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/6 "2009-03-30T17:41:39Z")
damn i forgot the carrier bearing is on the front section ok so i have 1 looks to be in good shape but i have no fucking clue if its abs or non abs ive had a bunch of these things lying around and i can remember what its out of measure the front section of you drive shaft and i can tell you . abs is 1 inch shorter i think ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 30, 2009, 5:48pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/7 "2009-03-30T17:48:00Z")
18 1/2" front section from the end of the sleeve on the shaft side that goes into the transmission the the end of the first u-joint I don;t know where your measuring yours from how ever. (mine is in my car) ---
**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\ **Post date:** [March 30, 2009, 5:54pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/8 "2009-03-30T17:54:48Z")
lol k hold on, i think i may of made a mistake mabie all the fronts are the same and the rear sections are different im going to bring it inside ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 30, 2009, 5:56pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/9 "2009-03-30T17:56:09Z")
lol alright brother. i appreciate it a lot ---
**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\ **Post date:** [March 30, 2009, 6:09pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/10 "2009-03-30T18:09:52Z")
16.5 inch from the dust cap that meets the trans - the start of the first u joint so im guessing the u joint is 2 inch. i think i was right the second time there all the same in the front section because i think this is a non abs shaft ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 30, 2009, 6:10pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/11 "2009-03-30T18:10:16Z")
The rear half of the shaft is what is different. The front’s are always the same due to hangar bearing location. Rear - 26 1/2" Front - 16 1/4" (installed on car, do not account for any of the splined part) Overall - 43" ---
**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\ **Post date:** [March 30, 2009, 6:11pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/12 "2009-03-30T18:11:08Z")
come grab it tomorrow if you want ill bring it to my shop in concord so its closer to brampton for u ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 30, 2009, 6:11pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/13 "2009-03-30T18:11:36Z")
okay so 16.5" I’m leaving work now, so i’ll talk to you tomorrow. I appreciate your time bro. Thanks again, very much. ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [March 30, 2009, 6:12pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/14 "2009-03-30T18:12:23Z")
tomorrow is a no go. tuesdays is wife night lol. weds is good for me. pm me your address and a time after 6:30pm ---
**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\ **Post date:** [March 30, 2009, 6:12pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/15 "2009-03-30T18:12:50Z")
or wed if u want ---
**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\ **Post date:** [March 30, 2009, 6:21pm UTC](https://forums.speedlife.net/t/s13-abs-vlsd-drive-shaft/123083/16 "2009-03-30T18:21:39Z")
> [@Let's talk hat's, cap's, covers.](https://forums.speedlife.net/t/lets-talk-hats-caps-covers/21086/19): > > okay so 16.5" > > I’m leaving work now, so i’ll talk to you tomorrow. > > I appreciate your time bro. Thanks again, very much. NP