# S13 Bride Seat Rail "with pics" **URL:** \ **Category:** Classifieds\ **Created:** [June 23, 2006, 10:07am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275 "2006-06-23T10:07:33Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [June 23, 2006, 10:07am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/1 "2006-06-23T10:07:33Z")
Okay, I have ONE driver side Bride Seat Rail (which has sliders). It came off a Sparco Bucket (which was Silvia\_Drifts) he sold it to Lucky and Lucky traded the Rail to me for some shit since he didnt need it. Well I’ve decided I dont need it either now as I went with a Solid Mount Setup vs Sliders… It will work with either a Sparco or Bride Seat but Im not sure if anything else would fit onto it as well ? Asking $100 (retails for $175USD) and its located in Kitchener for Pick Up ---
**Author:** ![ziptied](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ziptied/32/5509_2.png) [@ziptied](https://forums.speedlife.net/u/ziptied)\ **Post date:** [June 23, 2006, 11:24am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/2 "2006-06-23T11:24:45Z")
does anyone know if these will fit those roin seats or the recearo replicas ---
**Author:** ![s14\_2Nv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s14_2nv/32/5476_2.png) [@s14\_2Nv](https://forums.speedlife.net/u/s14_2Nv)\ **Post date:** [June 23, 2006, 1:03pm UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/3 "2006-06-23T13:03:45Z")
They will only fit bucket seats, not reclinables. ---
**Author:** ![Jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@Jesse](https://forums.speedlife.net/u/Jesse)\ **Post date:** [June 23, 2006, 2:22pm UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/4 "2006-06-23T14:22:04Z")
if you have it in a week ill take it off of you jeff ---
**Author:** ![imported\_rex](https://avatars.discourse-cdn.com/v4/letter/i/b5e925/32.png) [@imported\_rex](https://forums.speedlife.net/u/imported_rex)\ **Post date:** [June 23, 2006, 6:01pm UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/5 "2006-06-23T18:01:36Z")
Are these rails for bottoms mount seats or side mount ? anyone know if they will work on a large buddy club seat ? ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [June 25, 2006, 6:39am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/6 "2006-06-25T06:39:13Z")
> [@s14\_2Nv](#): > > They will only fit bucket seats, not reclinables. Just curious… why could you use a bucket but not a reclineable ? > [@rex](#): > > Are these rails for bottoms mount seats or side mount ? anyone know if they will work on a large buddy club seat ? The Rail is for a “bottom” mount seat… If you had access to a Fab shop or are able to Fab up your own Side Brackets you could just bolt that to the rail or weld it to the rail (so in other words, make it fit or customize the Rail until it does fit) ---
**Author:** ![Eggman](https://avatars.discourse-cdn.com/v4/letter/e/e99b99/32.png) [@Eggman](https://forums.speedlife.net/u/Eggman)\ **Post date:** [June 25, 2006, 6:46am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/7 "2006-06-25T06:46:35Z")
I think that’s because most bucket are side mounted, and reclinable are bottom mounted. ---
**Author:** ![Jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@Jesse](https://forums.speedlife.net/u/Jesse)\ **Post date:** [June 25, 2006, 9:11am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/8 "2006-06-25T09:11:00Z")
eggman has it on the money can you take a pic jeff? ---
**Author:** ![s14\_2Nv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s14_2nv/32/5476_2.png) [@s14\_2Nv](https://forums.speedlife.net/u/s14_2Nv)\ **Post date:** [June 26, 2006, 7:13am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/9 "2006-06-26T07:13:45Z")
> [@Eggman](#): > > I think that’s because most bucket are side mounted, and reclinable are bottom mounted. Exactly. But > The Rail is for a “bottom” mount seat… If you had access to a Fab shop or are able to Fab up your own Side Brackets you could just bolt that to the rail or weld it to the rail (so in other words, make it fit or customize the Rail until it does fit) Is the bride rail you have bottom mount? If so I’ll take it, I’ll need to see some pics first though too. If it’s a bottom mount, then it should by a bride type mo seat rail fyi. ---
**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\ **Post date:** [June 26, 2006, 7:43am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/10 "2006-06-26T07:43:18Z")
> [@s14\_2Nv](#): > > If it’s a bottom mount, then it should by a bride type mo seat rail fyi. I’ve seen it, yes its bottom mount, as in the seat bolt locations were on the bottom. ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [June 26, 2006, 9:01am UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/11 "2006-06-26T09:01:03Z")
Okay… here are some pictures of the Rail so everyone knows what it looks like etc etc ![http://img.photobucket.com/albums/v508/Jedi_Car_Fan/Other/100_0329.jpg](http://img.photobucket.com/albums/v508/Jedi_Car_Fan/Other/100_0329.jpg) ![http://img.photobucket.com/albums/v508/Jedi_Car_Fan/Other/100_0331.jpg](http://img.photobucket.com/albums/v508/Jedi_Car_Fan/Other/100_0331.jpg) ![http://img.photobucket.com/albums/v508/Jedi_Car_Fan/Other/100_0332.jpg](http://img.photobucket.com/albums/v508/Jedi_Car_Fan/Other/100_0332.jpg) ![http://img.photobucket.com/albums/v508/Jedi_Car_Fan/Other/100_0330.jpg](http://img.photobucket.com/albums/v508/Jedi_Car_Fan/Other/100_0330.jpg) ---
**Author:** ![Jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@Jesse](https://forums.speedlife.net/u/Jesse)\ **Post date:** [June 26, 2006, 12:29pm UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/12 "2006-06-26T12:29:10Z")
thats a bottom mount, wont work for me ☹ ---
**Author:** ![Eggman](https://avatars.discourse-cdn.com/v4/letter/e/e99b99/32.png) [@Eggman](https://forums.speedlife.net/u/Eggman)\ **Post date:** [June 26, 2006, 5:57pm UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/13 "2006-06-26T17:57:12Z")
No, I think those holes are for mounting the side mount to the bracket. Then you mount the bucket to the side mount. ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [June 26, 2006, 7:36pm UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/14 "2006-06-26T19:36:01Z")
Found this online… [https://www.projectnissan.com/shopping/pc/viewPrd.asp?idcategory=267&idproduct=2257](https://www.projectnissan.com/shopping/pc/viewPrd.asp?idcategory=267&idproduct=2257) Phil is right, its a Bride “Type MO” Rail which is indeed a Bottom Mount Rail. So It will fit a Bottom Mount Bride Seat and I know it fits a Sparco Sprint “which is also Bottom Mount” and I think Sparco uses the same bolt spacing etc on all their Bottom Mount Seats ? ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [June 28, 2006, 3:20pm UTC](https://forums.speedlife.net/t/s13-bride-seat-rail-with-pics/97275/15 "2006-06-28T15:20:07Z")
SOLD!