# s13 driveshaft?

**URL:** https://forums.speedlife.net/t/s13-driveshaft/146877
**Category:** Canada Nissan Automotive
**Created:** [May 24, 2007, 2:27pm UTC](https://forums.speedlife.net/t/s13-driveshaft/146877 "2007-05-24T14:27:56Z")
**Posts on this page:** 8
**Page:** 1

<div class="post-metadata">

### Author: ![TravyPoo](https://avatars.discourse-cdn.com/v4/letter/t/838e76/32.png) [@TravyPoo](https://forums.speedlife.net/u/TravyPoo)
#### Post date: [May 24, 2007, 2:27pm UTC](https://forums.speedlife.net/t/s13-driveshaft/146877/1 "2007-05-24T14:27:56Z")

</div>

im doing my clutch next week and i can get alumn driveshafts made pretty cheap from one of the companies my mom works for. just wondering if anyone had the specs on a 91 sr20 shaft. or if someone has the shaft that i can borrow to take in that would be awesome. thanks. also wondering how much different/if any the sr20 driveshafts are compared to 240sx ones…

---

<div class="post-metadata">

### Author: ![Ca\_Silvia](https://avatars.discourse-cdn.com/v4/letter/c/5f8ce5/32.png) [@Ca\_Silvia](https://forums.speedlife.net/u/Ca_Silvia)
#### Post date: [May 24, 2007, 4:11pm UTC](https://forums.speedlife.net/t/s13-driveshaft/146877/2 "2007-05-24T16:11:53Z")

</div>

IIRC they are all the same KA/CA/SR

---

<div class="post-metadata">

### Author: ![beatshack](https://avatars.discourse-cdn.com/v4/letter/b/f0a364/32.png) [@beatshack](https://forums.speedlife.net/u/beatshack)
#### Post date: [May 24, 2007, 4:18pm UTC](https://forums.speedlife.net/t/s13-driveshaft/146877/3 "2007-05-24T16:18:44Z")

</div>

getting a one piece alluminum made? 😃

---

<div class="post-metadata">

### Author: ![GRIPPY](https://avatars.discourse-cdn.com/v4/letter/g/ad7895/32.png) [@GRIPPY](https://forums.speedlife.net/u/GRIPPY)
#### Post date: [May 24, 2007, 4:47pm UTC](https://forums.speedlife.net/t/s13-driveshaft/146877/4 "2007-05-24T16:47:54Z")

</div>

Lengths are slightly different between ABS and non ABS cars.

---

<div class="post-metadata">

### Author: ![fcukven1](https://avatars.discourse-cdn.com/v4/letter/f/c2a13f/32.png) [@fcukven1](https://forums.speedlife.net/u/fcukven1)
#### Post date: [May 24, 2007, 10:59pm UTC](https://forums.speedlife.net/t/s13-driveshaft/146877/5 "2007-05-24T22:59:49Z")

</div>

yeah is about half of an inch different, it will really piss you off if your off by that much trust me happen to me :wall:

---

<div class="post-metadata">

### Author: ![TravyPoo](https://avatars.discourse-cdn.com/v4/letter/t/838e76/32.png) [@TravyPoo](https://forums.speedlife.net/u/TravyPoo)
#### Post date: [May 25, 2007, 12:03am UTC](https://forums.speedlife.net/t/s13-driveshaft/146877/6 "2007-05-25T00:03:45Z")

</div>

> [@beatshack](#):
>
> getting a one piece alluminum made? 😃

maybe, just need to find out how much its going to cost me. if its too much probably not, just bought megan street coils. havent even installed my clutch or anything yet :partyman:

---

<div class="post-metadata">

### Author: ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)
#### Post date: [May 25, 2007, 12:07am UTC](https://forums.speedlife.net/t/s13-driveshaft/146877/7 "2007-05-25T00:07:45Z")

</div>

From the states one piece aluminum shafts are $400-450 US. You can get one made here for …$350ish at a driveshaft shop. $250 for a steel one peice from a driveshaft shop here.

---

<div class="post-metadata">

### Author: ![240sx2nr](https://avatars.discourse-cdn.com/v4/letter/2/97f17d/32.png) [@240sx2nr](https://forums.speedlife.net/u/240sx2nr)
#### Post date: [May 25, 2007, 1:58am UTC](https://forums.speedlife.net/t/s13-driveshaft/146877/8 "2007-05-25T01:58:50Z")

</div>

I have a driveshaft that’s out of the car right now you can borrow if you want.

PM Me!

-1