# s13 side skirts

**URL:** <https://forums.speedlife.net/t/s13-side-skirts/83371>\
**Category:** SON240sx Automotive\
**Created:** [February 2, 2005, 9:54am UTC](https://forums.speedlife.net/t/s13-side-skirts/83371 "2005-02-02T09:54:57Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![jay01\_brown](https://avatars.discourse-cdn.com/v4/letter/j/f08c70/32.png) [@jay01\_brown](https://forums.speedlife.net/u/jay01_brown)\
**Post date:** [February 2, 2005, 9:54am UTC](https://forums.speedlife.net/t/s13-side-skirts/83371/1 "2005-02-02T09:54:57Z")

</div>

wanted to know what it takes to remove s13 sideskirts from the car  
fro whjat i saw there are a few screws that need to be takin off, but is that it?  
i dont wanna try pulling it off an breaking it…  
Did nissan use any adheisive to bond the kit together?  
anyhelp

---

<div class="post-metadata">

**Author:** ![AnDrEw](https://avatars.discourse-cdn.com/v4/letter/a/f19dbf/32.png) [@AnDrEw](https://forums.speedlife.net/u/AnDrEw)\
**Post date:** [February 2, 2005, 10:36am UTC](https://forums.speedlife.net/t/s13-side-skirts/83371/2 "2005-02-02T10:36:16Z")

</div>

Yeah, there is like a double sided tape they used, you gotta yank them off.  
Remove the screws and yank them off, I have never done it but buddy told me about it. I don’t think you should worry too much about breaking them, they are made of polyurethane.

goodluck,  
Andrew.

---

<div class="post-metadata">

**Author:** ![jay01\_brown](https://avatars.discourse-cdn.com/v4/letter/j/f08c70/32.png) [@jay01\_brown](https://forums.speedlife.net/u/jay01_brown)\
**Post date:** [February 2, 2005, 12:19pm UTC](https://forums.speedlife.net/t/s13-side-skirts/83371/3 "2005-02-02T12:19:06Z")

</div>

thanx bro  
bty… hows the car situation coming along?  
pm me…

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [February 2, 2005, 1:58pm UTC](https://forums.speedlife.net/t/s13-side-skirts/83371/4 "2005-02-02T13:58:55Z")

</div>

yanking + double sided tape = possibly ripping off paint?  
I say heat it up a bit 1st, might lessen paint damage.

---

<div class="post-metadata">

**Author:** ![Pavel](https://avatars.discourse-cdn.com/v4/letter/p/a4c791/32.png) [@Pavel](https://forums.speedlife.net/u/Pavel)\
**Post date:** [February 2, 2005, 2:50pm UTC](https://forums.speedlife.net/t/s13-side-skirts/83371/5 "2005-02-02T14:50:25Z")

</div>

I say pull it away a bit, then cut the tape, pull away some more, cut more tape… just like that.

Worry about removing the tape from the body later.

---

<div class="post-metadata">

**Author:** ![jay01\_brown](https://avatars.discourse-cdn.com/v4/letter/j/f08c70/32.png) [@jay01\_brown](https://forums.speedlife.net/u/jay01_brown)\
**Post date:** [February 2, 2005, 3:04pm UTC](https://forums.speedlife.net/t/s13-side-skirts/83371/6 "2005-02-02T15:04:02Z")

</div>

i dont care about the body its comin off of  
all i care about are the krits themselves  
i think ill be ok  
thanx for all the help guys

---

<div class="post-metadata">

**Author:** ![Jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@Jesse](https://forums.speedlife.net/u/Jesse)\
**Post date:** [February 2, 2005, 3:47pm UTC](https://forums.speedlife.net/t/s13-side-skirts/83371/7 "2005-02-02T15:47:43Z")

</div>

just pull them as hard as you can, they wont break

---

<div class="post-metadata">

**Author:** ![Pavel](https://avatars.discourse-cdn.com/v4/letter/p/a4c791/32.png) [@Pavel](https://forums.speedlife.net/u/Pavel)\
**Post date:** [February 3, 2005, 9:10am UTC](https://forums.speedlife.net/t/s13-side-skirts/83371/8 "2005-02-03T09:10:55Z")

</div>

Just drift into a tree, i swear the car will be fine. (scotty knows)