# s13 STEAL!!!! **URL:** \ **Category:** Classifieds\ **Created:** [March 16, 2009, 9:15am UTC](https://forums.speedlife.net/t/s13-steal/122617 "2009-03-16T09:15:05Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![ADAM](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ADAM](https://forums.speedlife.net/u/ADAM)\ **Post date:** [March 16, 2009, 9:15am UTC](https://forums.speedlife.net/t/s13-steal/122617/1 "2009-03-16T09:15:05Z")
Hi guys, I am putting one of my s13’s up for sale (have 3) and I need to concentrate on my LS1 240sx…so my black s13 racecar is up for sale (I also have a red DE race car that is open to offers as well…though not as highly modded) this would be a great starter race car…OR slap a cat on the exhaust and put it back on the road… the amount of aftermarket parts on the car is HUGE…and the engine is a GEM…its a bullet proof motor with some high dollar parts into it… ![http://www.turbo240sx.ca/blacks13.jpg](http://www.turbo240sx.ca/blacks13.jpg) ![http://www.turbo240sx.ca/blacks131.jpg](http://www.turbo240sx.ca/blacks131.jpg) 1990 s13 hatchback with built ka24e asking $2500 1=unorthadox racing pully (black) 2=injen air intake 3=Jim wolf tech race chip, 180kph defeated + ignition upgrade 4=gude racing header 5=16x6.5 rims and tires 6=custom 6 litre racing oil pan 7=5030 FI nos lines and fogger direct port kit 8=300zx 26mm 4 pot aluminum calipers and lines and hawke blue pads 9=ported race head 10=o-ringed block 11=heat treated micro polished bullnosed crank shaft 12=Manley forged eace rods 13=custom forged Ross flat top pistons with extended skirts and dropped lands for high PSI turbo or nitrous use 14=ACT 6 puck unsprung racing clutch 15=Firdenza aluminum flywheel 16=cat back exhaust system 17=cross drilled rear rotors 18= hawke blue pads metal master axis rear pads 19=front and rear white line race sway bars 20=4 point custom roll bar and fire extinguisher 21=5 point harness 22=obx short shifter kit 23=lsd r200 rear differential 24=lexan rear hatch 25=front and rear tower bars 26=engals camber adjusting bolts 27=fully stripped out and ready to race. Car won GT4 class in Solo1 2006 did a best was a 1:42 at Mosport Spares package 1=spare ka24e engine 2=spare transmission 3=full race cam 510 lift 300 duration (not installed yet) 4=spare head parts 5=spare tranny parts 6=spare driveshaft 7=spare front ¼ panels upside…chassis is still good, and the engine has over 5k into it…its bullet proof…was using it in a turbo application…has about 15hrs on it…so its in very good shape down side… has dented front ¼ panel, not that it effects its performance plus I am giving you a spare to fix it if you want to come see the car and are interested in buying it (dont have time for tire kickers and the usual SON low ballers)…shoot me an e-mail Adam [tyoga@rogers.com](mailto:tyoga@rogers.com) ---
**Author:** ![ADAM](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ADAM](https://forums.speedlife.net/u/ADAM)\ **Post date:** [March 16, 2009, 9:25am UTC](https://forums.speedlife.net/t/s13-steal/122617/2 "2009-03-16T09:25:48Z")
as a side note… i have a set of 16x7.5 kosie racing rims for the car with 245 toyo RA1 race tires that I would sell to the buyer of the car for an extra $550 which is a steal too the car has stock rims with new street tires on it currently ---
**Author:** ![accelr8](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@accelr8](https://forums.speedlife.net/u/accelr8)\ **Post date:** [March 16, 2009, 10:18am UTC](https://forums.speedlife.net/t/s13-steal/122617/3 "2009-03-16T10:18:51Z")
i’ll take it if i get my line of credit soon lol. thats if its not sold by then ---
**Author:** ![ADAM](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ADAM](https://forums.speedlife.net/u/ADAM)\ **Post date:** [March 16, 2009, 10:34am UTC](https://forums.speedlife.net/t/s13-steal/122617/4 "2009-03-16T10:34:30Z")
some pics of the parts that are in it… ![http://www.turbo240sx.ca/actclutch1.jpg](http://www.turbo240sx.ca/actclutch1.jpg) ![http://www.turbo240sx.ca/block2.jpg](http://www.turbo240sx.ca/block2.jpg) ![http://www.turbo240sx.ca/crank2.jpg](http://www.turbo240sx.ca/crank2.jpg) ![http://www.turbo240sx.ca/flywheel1.jpg](http://www.turbo240sx.ca/flywheel1.jpg) ![http://www.turbo240sx.ca/oldvsnewpisandconrod.jpg](http://www.turbo240sx.ca/oldvsnewpisandconrod.jpg) ![http://www.turbo240sx.ca/noslines.jpg](http://www.turbo240sx.ca/noslines.jpg) ![http://www.turbo240sx.ca/0-ring1.jpg](http://www.turbo240sx.ca/0-ring1.jpg) ![http://www.turbo240sx.ca/pistonnew.jpg](http://www.turbo240sx.ca/pistonnew.jpg) ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 16, 2009, 11:39am UTC](https://forums.speedlife.net/t/s13-steal/122617/5 "2009-03-16T11:39:09Z")
i like it… Adam, what does it have for shocks and struts? i thought it had Tein’s but you dont mention anything. you might want to suggest a ball-park price for it, some guys might be deterred thinking that you want more than you do for it. ---
**Author:** ![CSK-240-R1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/csk-240-r1/32/5698_2.png) [@CSK-240-R1](https://forums.speedlife.net/u/CSK-240-R1)\ **Post date:** [March 16, 2009, 11:42am UTC](https://forums.speedlife.net/t/s13-steal/122617/6 "2009-03-16T11:42:00Z")
he posted 2500 for the price ---
**Author:** ![accelr8](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@accelr8](https://forums.speedlife.net/u/accelr8)\ **Post date:** [March 16, 2009, 11:42am UTC](https://forums.speedlife.net/t/s13-steal/122617/7 "2009-03-16T11:42:57Z")
are those high comp pistons ? what is the comp on those ? 9:1 -10:1 ? ---
**Author:** ![ADAM](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ADAM](https://forums.speedlife.net/u/ADAM)\ **Post date:** [March 16, 2009, 11:53am UTC](https://forums.speedlife.net/t/s13-steal/122617/8 "2009-03-16T11:53:38Z")
its listed at $2500 … no …the car does not have coilovers…I put stock struts and coils in it the red DE however does have megan coilovers My TEIN RA’s are on my LS1 powered v8 240sx…so I need them re: compression ratio , its stock compression ratio, the Ross pistons are custom made, with flattop heads, huge skirts to disspate the heat, and dropped lands to take silly boost or spray…they are Mated to Manely forged rods …its a great set up Adam ---
**Author:** ![kollo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kollo/32/5661_2.png) [@kollo](https://forums.speedlife.net/u/kollo)\ **Post date:** [March 16, 2009, 12:36pm UTC](https://forums.speedlife.net/t/s13-steal/122617/9 "2009-03-16T12:36:20Z")
> [@Birth of a Richard Mille](https://forums.speedlife.net/t/birth-of-a-richard-mille/20856/21): > > are those high comp pistons ? what is the comp on those ? 9:1 -10:1 ? stock on the single slammer is 9:1 so there higher strength ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [March 16, 2009, 12:56pm UTC](https://forums.speedlife.net/t/s13-steal/122617/10 "2009-03-16T12:56:31Z")
ah sorry i didnt see the price, too busy looking at the pretty pictures… this is wicked cheap… if no one else picks it up maybe i’ll take it for #23. ---
**Author:** ![5cott](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/5cott/32/5737_2.png) [@5cott](https://forums.speedlife.net/u/5cott)\ **Post date:** [March 16, 2009, 2:20pm UTC](https://forums.speedlife.net/t/s13-steal/122617/11 "2009-03-16T14:20:06Z")
If you can wait a week I am willing to offer asking price 😛 ---
**Author:** ![Fobwall](https://avatars.discourse-cdn.com/v4/letter/f/7ea924/32.png) [@Fobwall](https://forums.speedlife.net/u/Fobwall)\ **Post date:** [March 16, 2009, 6:01pm UTC](https://forums.speedlife.net/t/s13-steal/122617/12 "2009-03-16T18:01:58Z")
> [@Birth of a Richard Mille](https://forums.speedlife.net/t/birth-of-a-richard-mille/20856/27): > > If you can wait a week I am willing to offer asking price 😛 I should post this in the Front Desk but I think people really should stop posting stuff like: “If you still have this in 2 months, I’ll buy it” Why can’t you wait 2 months and then send him a pm instead? ---
**Author:** ![5cott](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/5cott/32/5737_2.png) [@5cott](https://forums.speedlife.net/u/5cott)\ **Post date:** [March 16, 2009, 11:07pm UTC](https://forums.speedlife.net/t/s13-steal/122617/13 "2009-03-16T23:07:43Z")
> [@Skateboarding today](https://forums.speedlife.net/t/skateboarding-today/20840/20): > > I should post this in the Front Desk but I think people really should stop posting stuff like: “If you still have this in 2 months, I’ll buy it” > > Why can’t you wait 2 months and then send him a pm instead? I said a week, not two months. He can wait till next week if he wants it sold, some of us pickup pay checks. If he sells it before then, all the best to him. ---
**Author:** ![BRIGGS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/briggs/32/5662_2.png) [@BRIGGS](https://forums.speedlife.net/u/BRIGGS)\ **Post date:** [March 17, 2009, 12:00am UTC](https://forums.speedlife.net/t/s13-steal/122617/14 "2009-03-17T00:00:59Z")
Looks like its worth the money! ---
**Author:** ![padu](https://avatars.discourse-cdn.com/v4/letter/p/e274bd/32.png) [@padu](https://forums.speedlife.net/u/padu)\ **Post date:** [March 17, 2009, 4:27am UTC](https://forums.speedlife.net/t/s13-steal/122617/15 "2009-03-17T04:27:33Z")
pmed you ---
**Author:** ![ADAM](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@ADAM](https://forums.speedlife.net/u/ADAM)\ **Post date:** [March 17, 2009, 6:14am UTC](https://forums.speedlife.net/t/s13-steal/122617/16 "2009-03-17T06:14:29Z")
its tentatively sold already and to a fellow racer…so it will continue its life on the track the Kosie rims have been sold with the car as well Adam