# S13 VLSD question!! **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [May 27, 2006, 9:36pm UTC](https://forums.speedlife.net/t/s13-vlsd-question/142680 "2006-05-27T21:36:18Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![shortChamp](https://avatars.discourse-cdn.com/v4/letter/s/e9c0ed/32.png) [@shortChamp](https://forums.speedlife.net/u/shortChamp)\ **Post date:** [May 27, 2006, 9:36pm UTC](https://forums.speedlife.net/t/s13-vlsd-question/142680/1 "2006-05-27T21:36:18Z")
Hey everyone!! Im new to NECC and this is my first post! I am a DIY’er and im having a little trouble with a diff swap. I am swapping my broken C33 VLSD with a 240SX SE VLSD… Everything looked like it was going well until I got the diffs side by side and I noticed my laurel’s LSD has a ABS sensor so its a little longer!!! Soooo the 240SX VLSD is about 12mm’s shorter than the C33 LSD. I am wondering if it would be better to get a spacer made to compensate for the 12mm difference between the propeller shaft and diff imput OR keep using my ABS pumpkin, and just swap over the internals? If I do swap over the internals I need to know how to get the pinion out (the spiral gear attached to the propeller shaft) Thoughts? Thanks! ---
**Author:** ![sil\_eightyRPS13](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13)\ **Post date:** [May 31, 2006, 4:33pm UTC](https://forums.speedlife.net/t/s13-vlsd-question/142680/2 "2006-05-31T16:33:07Z")
im pretty sure the yoke slip will compensate for the difference…double check with 1mns13… ---
**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\ **Post date:** [May 31, 2006, 8:24pm UTC](https://forums.speedlife.net/t/s13-vlsd-question/142680/3 "2006-05-31T20:24:40Z")
> [@sil\_eightyRPS13](#): > > im pretty sure the yoke slip will compensate for the difference…double check with 1mns13… Werd it should be OK.