# sbc clyinder heads iron

**URL:** <https://forums.speedlife.net/t/sbc-clyinder-heads-iron/77469>\
**Category:** Classifieds\
**Created:** [December 21, 2009, 5:44pm UTC](https://forums.speedlife.net/t/sbc-clyinder-heads-iron/77469 "2009-12-21T17:44:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![speedped79](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/speedped79/32/7491_2.png) [@speedped79](https://forums.speedlife.net/u/speedped79)\
**Post date:** [December 21, 2009, 5:44pm UTC](https://forums.speedlife.net/t/sbc-clyinder-heads-iron/77469/1 "2009-12-21T17:44:36Z")

</div>

these are 882 castings 76cc chambers 2.02 intake 1.6 exhaust the rocker studs are pinned, they are ported/polished. motor they were on was a late 80,s bracket car that ran low 7,s high 6,s on motor in the 1/8th. i would use them but the chambers are too big for the pistons i have in my motor so the compression ratio would be lower than i want.  
askin 150 939-0754 ask for steve