# sbc heads

**URL:** <https://forums.speedlife.net/t/sbc-heads/76103>\
**Category:** Classifieds\
**Created:** [November 13, 2009, 1:11pm UTC](https://forums.speedlife.net/t/sbc-heads/76103 "2009-11-13T13:11:24Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![speedped79](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/speedped79/32/7491_2.png) [@speedped79](https://forums.speedlife.net/u/speedped79)\
**Post date:** [November 13, 2009, 1:11pm UTC](https://forums.speedlife.net/t/sbc-heads/76103/1 "2009-11-13T13:11:24Z")

</div>

these are still on the car ill be taking the motor out and apart soon but i figure id post this up now.  
heads are 882 castings. they are ported/polished have springs and such for a bigger cam, the rocker studs are pinned. these were done up some years ago for my neighbors old street rod and he has since put a new motor in that so i got these off him. he had over 1200 invested in these.  
if you compare these side by side to a stock casting the difference is clearly noticeable.  
im asking 350 obo for these

---

<div class="post-metadata">

**Author:** ![Justin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/justin/32/7459_2.png) [@Justin](https://forums.speedlife.net/u/Justin)\
**Post date:** [November 13, 2009, 2:15pm UTC](https://forums.speedlife.net/t/sbc-heads/76103/2 "2009-11-13T14:15:35Z")

</div>

Who did the porting?

---

<div class="post-metadata">

**Author:** ![speedped79](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/speedped79/32/7491_2.png) [@speedped79](https://forums.speedlife.net/u/speedped79)\
**Post date:** [November 13, 2009, 5:12pm UTC](https://forums.speedlife.net/t/sbc-heads/76103/3 "2009-11-13T17:12:12Z")

</div>

> [@Justin](#):
>
> Who did the porting?

a speedshop idk which one the work was done years ago the engine these heads were on pulled really good tho

---

<div class="post-metadata">

**Author:** ![speedped79](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/speedped79/32/7491_2.png) [@speedped79](https://forums.speedlife.net/u/speedped79)\
**Post date:** [November 13, 2009, 8:02pm UTC](https://forums.speedlife.net/t/sbc-heads/76103/4 "2009-11-13T20:02:54Z")

</div>

i should have the heads off the motor tommorow as long as its not cold out, also forgot to mention they are 2.02 and 1.6 valved