# Selling ALL Parts from our shop project CAR ALL NEW!!!!! **URL:** \ **Category:** Classifieds\ **Created:** [July 5, 2006, 12:05pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661 "2006-07-05T12:05:30Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [July 5, 2006, 12:05pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/1 "2006-07-05T12:05:30Z")
Ok here is the deal we bought a nissan 240sx last year to build as a shop drift car, it sat for a while and we bought all these parts for it, when we finally got around to installing all the parts the car turned out to be a HUGE RUST BUCKET, we tried to save it but it is DONE. We are selling of the following parts VERY CHEAP they have been installed on the car but the car has never ran because it has no motor. So all parts are basically 99% new. -MEGAN RACING 3" exhaust DRIFT Spec **$400** ($550 + tax new) -17" rims gun metal (Gram light 57c knockoffs)with General UHP Exclaim rubber 225/45/17 front and 245/45/17 rear **$900** ($1500 + tax new) -CA18DET Fully rebuilt, OEM, ported head, custom built aluminum intake plenum with 60mm TB **$900.00** - Tranny CA18det bellhousing with Ka24de trans with 4 puck KEVLAR clutch with 100% stiffer plate(clutch brand new) **$450** -Complete uncut wire harness and ECU, RB20det maf and ignitor **$400** -Xspower Exhaust manifold and O2 Housing (new) **$125** -MEGAN RACING C pillar bar **$40** also selling 240sx hatch no holes 150 obo Pm me for pics or call at the shop 905 389 3542 ask for John ---
**Author:** ![roast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/roast/32/5498_2.png) [@roast](https://forums.speedlife.net/u/roast)\ **Post date:** [July 5, 2006, 8:39pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/2 "2006-07-05T20:39:38Z")
pm’d ---
**Author:** ![standXalone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/standxalone/32/5536_2.png) [@standXalone](https://forums.speedlife.net/u/standXalone)\ **Post date:** [July 5, 2006, 9:20pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/3 "2006-07-05T21:20:18Z")
damn, that CA18DET sounds sweet ---
**Author:** ![MrSX](https://avatars.discourse-cdn.com/v4/letter/m/dec6dc/32.png) [@MrSX](https://forums.speedlife.net/u/MrSX)\ **Post date:** [July 5, 2006, 10:11pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/4 "2006-07-05T22:11:42Z")
lotta good deal here!i’m interested in rims/tires. plz post pic or send to [lvank@hotmail.com](mailto:lvank@hotmail.com) ---
**Author:** ![driftRPS13](https://avatars.discourse-cdn.com/v4/letter/d/8edcca/32.png) [@driftRPS13](https://forums.speedlife.net/u/driftRPS13)\ **Post date:** [July 5, 2006, 11:07pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/5 "2006-07-05T23:07:35Z")
are the rims 4 or 5 bolt? ---
**Author:** ![michael240](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@michael240](https://forums.speedlife.net/u/michael240)\ **Post date:** [July 6, 2006, 9:12am UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/6 "2006-07-06T09:12:54Z")
Are the Megan Coilovers the STREET version or the TRACK version? ---
**Author:** ![cloudzero3](https://avatars.discourse-cdn.com/v4/letter/c/2acd7d/32.png) [@cloudzero3](https://forums.speedlife.net/u/cloudzero3)\ **Post date:** [July 6, 2006, 11:08am UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/7 "2006-07-06T11:08:51Z")
is the hatch spoilerless? and what colour? ---
**Author:** ![s14\_2Nv](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s14_2nv/32/5476_2.png) [@s14\_2Nv](https://forums.speedlife.net/u/s14_2Nv)\ **Post date:** [July 6, 2006, 11:15am UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/8 "2006-07-06T11:15:08Z")
How wide are the rims? ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [July 6, 2006, 12:37pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/9 "2006-07-06T12:37:02Z")
Hey guys thanks for your interest I will try to answer all questions. -rims are 4 bolt, 7.5" wide, 40mm offset I have pics just shoot me a pm -hatch has no spoiler red colour from a GM -Coilovers are STREET series and once again all this stff is BRAND NEW (not the hatch) ---
**Author:** ![roast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/roast/32/5498_2.png) [@roast](https://forums.speedlife.net/u/roast)\ **Post date:** [July 6, 2006, 1:27pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/10 "2006-07-06T13:27:51Z")
> [@sil8t](#): > > -rims are 4 bolt, 7.5" wide, 40mm offset I have pics just shoot me a pm Boo, 40mm offest. I sent you a pm about the rims and never got a reply; don’t worry about it as I don’t like 40mm offset. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [July 6, 2006, 2:05pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/11 "2006-07-06T14:05:45Z")
Pics of the Rims please… ---
**Author:** ![MrSX](https://avatars.discourse-cdn.com/v4/letter/m/dec6dc/32.png) [@MrSX](https://forums.speedlife.net/u/MrSX)\ **Post date:** [July 6, 2006, 5:38pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/12 "2006-07-06T17:38:11Z")
> [@roast](#): > > [quote=sil8t]-rims are 4 bolt, 7.5" wide, 40mm offset I have pics just shoot me a pm Boo, 40mm offest. I sent you a pm about the rims and never got a reply; don’t worry about it as I don’t like 40mm offset.[/quote] whats wrong with 40mm offset? ---
**Author:** ![Scooby](https://avatars.discourse-cdn.com/v4/letter/s/6f9a4e/32.png) [@Scooby](https://forums.speedlife.net/u/Scooby)\ **Post date:** [July 6, 2006, 8:32pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/13 "2006-07-06T20:32:50Z")
doesn’t stick out far enough!!! ---
**Author:** ![Mamba](https://avatars.discourse-cdn.com/v4/letter/m/49beb7/32.png) [@Mamba](https://forums.speedlife.net/u/Mamba)\ **Post date:** [July 6, 2006, 9:16pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/14 "2006-07-06T21:16:29Z")
pm’d ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [July 11, 2006, 7:21am UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/15 "2006-07-11T07:21:22Z")
Prices lowered and new items added, check out the first post. ---
**Author:** ![Jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@Jesse](https://forums.speedlife.net/u/Jesse)\ **Post date:** [July 11, 2006, 2:42pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/16 "2006-07-11T14:42:31Z")
i took a quick look at the ca john is selling. definately a clean engnine. bump for a good seller ---
**Author:** ![logik23](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/logik23/32/5548_2.png) [@logik23](https://forums.speedlife.net/u/logik23)\ **Post date:** [July 11, 2006, 6:25pm UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/17 "2006-07-11T18:25:58Z")
40mm = FWD offset ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [July 17, 2006, 6:38am UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/18 "2006-07-17T06:38:56Z")
> [@logik23](#): > > 40mm = FWD offset With the 7.5" width & 245 tire they look good on the car, they come to almost flush to the fenders ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [July 24, 2006, 11:30am UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/19 "2006-07-24T11:30:33Z")
Lots of good parts still left guys need to sell ---
**Author:** ![t3\_to4eturboman](https://avatars.discourse-cdn.com/v4/letter/t/57b2e6/32.png) [@t3\_to4eturboman](https://forums.speedlife.net/u/t3_to4eturboman)\ **Post date:** [August 7, 2006, 10:26am UTC](https://forums.speedlife.net/t/selling-all-parts-from-our-shop-project-car-all-new/97661/20 "2006-08-07T10:26:17Z")
yo i`ll offer you a $1000 for the complete engine and tranny package