# Shift518 W.o.T. **URL:** \ **Category:** Shift518 Off Topic\ **Created:** [September 20, 2007, 7:48am UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835 "2007-09-20T07:48:18Z")\ **Posts on this page:** 20\ **Page:** 132
**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\ **Post date:** [June 16, 2011, 6:37pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2621 "2011-06-16T18:37:04Z")
> [@Side Curtian AirBags = good stuff!](https://forums.speedlife.net/t/side-curtian-airbags-good-stuff/43079/20): > > If you want, we can make some time for me to wire that up correctly. Most of your connections/terminations are shit (don’t take offense to that, I wire aircraft for a living so my standards are pretty high). I’d probably want you to drive it up as I’m more comfortable working in my home garage. I do have plans in the near future to re do all the wiring… that plan isnt until the car moves again LOL ---
**Author:** ![dsblk93gt](https://avatars.discourse-cdn.com/v4/letter/d/9de053/32.png) [@dsblk93gt](https://forums.speedlife.net/u/dsblk93gt)\ **Post date:** [June 16, 2011, 6:37pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2622 "2011-06-16T18:37:21Z")
> [@FS: 1998 Integra GSR](https://forums.speedlife.net/t/fs-1998-integra-gsr/41497/10): > > yah. I ran a 12.7 @ 115 N/A before I tried to spray. I tried several runs to spray, and my nitrous wasnt working. Over a hour later in the parking lot with trial and error going through my whole kit, I replaced a blown fuse and gave it another run. I was expecting for the spray to not work because the nitrous tests werent working in the parking lot. > > 2.2 60’ and the nitrous kicked in…that was the 11.9 @ 122 > > I did like 5 n/a runs and a few of the runs I cut 1.8 60’s but always missed 2nd. My 12.7 @ 115 was with a 2.29 60’. If I didnt miss second, with the 1.8 60’, a 12.0 was doable N/A IMO. > > then after the 100 shot run, I got greedy and put in the 150. Came out with a 1.9 60’ and 2nd, I wasnt movin. 3rd, still not moving until the top of the power band. Hit 4th and it took off. That was 12.2 @ 127 LOL > > after that, the clutch didnt even hold n/a. Spanked it. Car doesnt move. > > I am pretty confident with the new clutch and the 150 shot, spraying out of the hole I can come home with a 10.x slip @ 128+. All nitrous runs discussed above were spraying 2nd, 3rd and 4th. I actually had the spray shutting off at 6500rpms also…I was going through the traps at 6800…so I could get more out of it in each gear if I raised my window. Ugh that sucks! I need to get mine back together, just had way too much shit going on. That is the range I am hoping to be at time wise (with slicks) IF I get it done and don’t have more bad luck. I ran 11.8@116 before with a 1.6x 60ft at the track in a 91 GT so I’m sure that is possible NA with a good clutch and traction. ---
**Author:** ![TurboTravis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbotravis/32/6406_2.png) [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)\ **Post date:** [June 16, 2011, 6:38pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2623 "2011-06-16T18:38:21Z")
> [@Devil May Cry 4 - PS3 Review](https://forums.speedlife.net/t/devil-may-cry-4-ps3-review/43024/18): > > I do have plans in the near future to re do all the wiring… > > that plan isnt until the car moves again LOL Cool. If you want to meet up sometime, I’ll give you a quick lesson on properly terminating wires, making proper splices, etc. It’s really not hard at all with a little knowledge and the right tools. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 16, 2011, 6:39pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2624 "2011-06-16T18:39:07Z")
> [@FS: Tool boxes, Shop fridge, computer battery backup](https://forums.speedlife.net/t/fs-tool-boxes-shop-fridge-computer-battery-backup/42999/12): > > Cool. If you want to meet up sometime, I’ll give you a quick lesson on properly terminating wires, making proper splices, etc. It’s really not hard at all with a little knowledge and the right tools. i got the right toool for the job ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [June 16, 2011, 6:39pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2625 "2011-06-16T18:39:24Z")
There’s definitely a right way and a wrong way to do it. I’d also say that 99% of people do it the wrong way. ---
**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\ **Post date:** [June 16, 2011, 6:39pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2626 "2011-06-16T18:39:51Z")
sounds good man. I will be honest with you, I can arc weld pretty decent, but I could not solder those wires to save my life. I tried haha ---
**Author:** ![TurboTravis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbotravis/32/6406_2.png) [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)\ **Post date:** [June 16, 2011, 6:39pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2627 "2011-06-16T18:39:59Z")
> [@Callout: KCuv and Micah...the BS stops here...](https://forums.speedlife.net/t/callout-kcuv-and-micah-the-bs-stops-here/43105/8): > > i got the right toool for the job inside or outside of pants? ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 16, 2011, 6:41pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2628 "2011-06-16T18:41:04Z")
> [@I was Ripped off](https://forums.speedlife.net/t/i-was-ripped-off/43104/33): > > inside or outside of pants? both ---
**Author:** ![TurboTravis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbotravis/32/6406_2.png) [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)\ **Post date:** [June 16, 2011, 6:41pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2629 "2011-06-16T18:41:23Z")
> [@WTB: Seats](https://forums.speedlife.net/t/wtb-seats/43074/8): > > sounds good man. > > I will be honest with you, I can arc weld pretty decent, but I could not solder those wires to save my life. I tried haha lolz. Honestly, I don’t see where any soldering would be needed, other than possibly onto a switch or something. I’ll show you how to make an aviation-quality crimp, which is good enough for the shit we do:tongue ---
**Author:** ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)\ **Post date:** [June 16, 2011, 6:42pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2630 "2011-06-16T18:42:26Z")
> [@Side Curtian AirBags = good stuff!](https://forums.speedlife.net/t/side-curtian-airbags-good-stuff/43079/21): > > lolz. Honestly, I don’t see where any soldering would be needed, other than possibly onto a switch or something. I’ll show you how to make an aviation-quality crimp, which is good enough for the shit we do:tongue wait until you see all the electrical connectors after I take the electrical tape off…then you will understand haha ---
**Author:** ![TurboTravis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbotravis/32/6406_2.png) [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)\ **Post date:** [June 16, 2011, 6:43pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2631 "2011-06-16T18:43:17Z")
> [@I'm DPM74!](https://forums.speedlife.net/t/im-dpm74/43101/22): > > wait until you see all the electrical connectors after I take the electrical tape off…then you will understand haha Oh, I understand that I’ll see a pile of chicken shit…I’ll show you how to make chicken salad out of it:crackup ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [June 16, 2011, 6:43pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2632 "2011-06-16T18:43:54Z")
> [@I'm DPM74!](https://forums.speedlife.net/t/im-dpm74/43101/23): > > Oh, I understand that I’ll see a pile of chicken shit…I’ll show you how to make chicken salad out of it:crackup now your tossin salad ? ---
**Author:** ![TurboTravis](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbotravis/32/6406_2.png) [@TurboTravis](https://forums.speedlife.net/u/TurboTravis)\ **Post date:** [June 16, 2011, 6:44pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2633 "2011-06-16T18:44:37Z")
> [@Legalize it?](https://forums.speedlife.net/t/legalize-it/42812/219): > > now your tossin salad ? When did I stop? ---
**Author:** ![Swifty](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@Swifty](https://forums.speedlife.net/u/Swifty)\ **Post date:** [June 17, 2011, 6:16am UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2634 "2011-06-17T06:16:09Z")
Name of 10secondC? Erik something? And year of the car? ---
**Author:** ![DeathbyRT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deathbyrt/32/6648_2.png) [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)\ **Post date:** [June 17, 2011, 6:49am UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2635 "2011-06-17T06:49:04Z")
Erik S. 2006 300c ---
**Author:** ![10secondC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/10secondc/32/6715_2.png) [@10secondC](https://forums.speedlife.net/u/10secondC)\ **Post date:** [June 17, 2011, 6:53am UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2636 "2011-06-17T06:53:42Z")
> [@I was Ripped off](https://forums.speedlife.net/t/i-was-ripped-off/43104/42): > > Name of 10secondC? Erik something? And year of the car? Jeeze I sent the PM to the admin with all that…lol Erik Storms 2006 Chrysler 300C 10.91@124 ---
**Author:** ![Swifty](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@Swifty](https://forums.speedlife.net/u/Swifty)\ **Post date:** [June 17, 2011, 6:54am UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2637 "2011-06-17T06:54:49Z")
Yea, Vlad is just slow. Should be updated, post up if there is anything I missed! ---
**Author:** ![10secondC](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/10secondc/32/6715_2.png) [@10secondC](https://forums.speedlife.net/u/10secondC)\ **Post date:** [June 17, 2011, 7:04am UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2638 "2011-06-17T07:04:16Z")
nah looks good…only thing I see you updating on the list is when one of these guys knocks me down. ---
**Author:** ![Johawk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/johawk/32/6284_2.png) [@Johawk](https://forums.speedlife.net/u/Johawk)\ **Post date:** [June 17, 2011, 1:33pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2639 "2011-06-17T13:33:21Z")
Nope. You’re officially at the top of the list. ---
**Author:** ![94Gt5.0](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/94gt5.0/32/6377_2.png) [@94Gt5.0](https://forums.speedlife.net/u/94Gt5.0)\ **Post date:** [June 17, 2011, 9:00pm UTC](https://forums.speedlife.net/t/shift518-w-o-t/234835/2640 "2011-06-17T21:00:26Z")
Buying a twin disk, bogarts and a 100 shot and taking my spot back :lol [Previous page](https://forums.speedlife.net/t/shift518-w-o-t/234835.md?page=131) [Next page](https://forums.speedlife.net/t/shift518-w-o-t/234835.md?page=133)