# Should I...

**URL:** <https://forums.speedlife.net/t/should-i/17136>\
**Category:** NYSpeed Automotive\
**Created:** [September 7, 2006, 6:01pm UTC](https://forums.speedlife.net/t/should-i/17136 "2006-09-07T18:01:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [September 7, 2006, 6:01pm UTC](https://forums.speedlife.net/t/should-i/17136/1 "2006-09-07T18:01:17Z")

</div>

…buy this, [ebay link](http://cgi.ebay.com/ebaymotors/Earls-civic-integra-5-speed-conversion-clutch-line-kit_W0QQcmdZViewItemQQcategoryZ46098QQhashZitem280024867257QQihZ018QQitemZ280024867257QQrdZ1QQsspagenameZWDVW) , or should I go and buy some hard line and attempt to bend it myself.

note: i do not have the original clutch line

the one i am missing is the second half that connects to the slave cylinder

---

<div class="post-metadata">

**Author:** ![ezfd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ezfd/32/7334_2.png) [@ezfd](https://forums.speedlife.net/u/ezfd)\
**Post date:** [September 7, 2006, 10:02pm UTC](https://forums.speedlife.net/t/should-i/17136/2 "2006-09-07T22:02:40Z")

</div>

dont buy hard line, just buy some braided stainless line, some fittings and some crimp tools and do it yourself, but if all that stuff comes up to over $60 then buy it from ebay.

---

<div class="post-metadata">

**Author:** ![Boarderx192](https://avatars.discourse-cdn.com/v4/letter/b/b782af/32.png) [@Boarderx192](https://forums.speedlife.net/u/Boarderx192)\
**Post date:** [September 7, 2006, 10:10pm UTC](https://forums.speedlife.net/t/should-i/17136/3 "2006-09-07T22:10:42Z")

</div>

> [@ezfd](#):
>
> dont buy hard line, just buy some braided stainless line, some fittings and some crimp tools and do it yourself, but if all that stuff comes up to over $60 then buy it from ebay.

:wstupid:

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [September 8, 2006, 6:52am UTC](https://forums.speedlife.net/t/should-i/17136/4 "2006-09-08T06:52:46Z")

</div>

ok, but where do i buy the S.S. line from.

just go to a hardware store for that or do i have to buy special stuff for this?

in very interested in doing this cause i need to setup my oil lines for my turbo, so i just need to know, do i need special line, or just hit up a hardware store?

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [September 8, 2006, 12:31pm UTC](https://forums.speedlife.net/t/should-i/17136/5 "2006-09-08T12:31:27Z")

</div>

anyone know?

---

<div class="post-metadata">

**Author:** ![Jeller](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jeller](https://forums.speedlife.net/u/Jeller)\
**Post date:** [September 8, 2006, 1:36pm UTC](https://forums.speedlife.net/t/should-i/17136/6 "2006-09-08T13:36:44Z")

</div>

I think ferry hydraulics on walden.

Jeller

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [September 8, 2006, 2:09pm UTC](https://forums.speedlife.net/t/should-i/17136/7 "2006-09-08T14:09:33Z")

</div>

according to the website, it looks like they will have it

bah, they just closed

ill call them tomorow

hopefully i can get enough parts to do my clutch line and my oil lines

thanks jeller

+1 karma for you