# SHREK - Starting over

**URL:** <https://forums.speedlife.net/t/shrek-starting-over/65296>\
**Category:** Builds\
**Created:** [March 29, 2009, 6:57pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296 "2009-03-29T18:57:32Z")\
**Posts on this page:** 20\
**Page:** 15

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [April 4, 2010, 11:03am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/281 "2010-04-04T11:03:42Z")

</div>

unless you have a wideband to monitor everything and can tune it yourself, your better off using the stock inj/map sensor with a stock ecu to start the car up untill it can get tuned and broken in

---

<div class="post-metadata">

**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\
**Post date:** [April 4, 2010, 12:01pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/282 "2010-04-04T12:01:03Z")

</div>

> [@Shrek](#):
>
> It was vapor blasted. I can’t decide what I want to do with it if anything. Might just clear it.

you should have me powder coat it, or just clear powdercoat it…much nicer finish than paint, and wayyyy more durable.

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [April 4, 2010, 12:38pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/283 "2010-04-04T12:38:33Z")

</div>

![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0875.jpg?t=1270409744](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0875.jpg?t=1270409744)

![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0876.jpg?t=1270409689](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0876.jpg?t=1270409689)

![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0878.jpg?t=1270409594](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0878.jpg?t=1270409594)

![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0880.jpg?t=1270409780](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0880.jpg?t=1270409780)

![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0881.jpg?t=1270409801](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0881.jpg?t=1270409801)

---

<div class="post-metadata">

**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\
**Post date:** [April 4, 2010, 5:26pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/284 "2010-04-04T17:26:08Z")

</div>

:tup:

---

<div class="post-metadata">

**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\
**Post date:** [April 4, 2010, 7:25pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/285 "2010-04-04T19:25:30Z")

</div>

> [@99\_civic\_si](#):
>
> you should have me powder coat it, or just clear powdercoat it…much nicer finish than paint, and wayyyy more durable.

x2 clear powder coat it!!!

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [April 6, 2010, 7:59pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/286 "2010-04-06T19:59:16Z")

</div>

![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0884.jpg?t=1270609074](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0884.jpg?t=1270609074)

---

<div class="post-metadata">

**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\
**Post date:** [April 6, 2010, 8:17pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/287 "2010-04-06T20:17:07Z")

</div>

where are you routing it to?

---

<div class="post-metadata">

**Author:** ![nopistons91](https://avatars.discourse-cdn.com/v4/letter/n/ea5d25/32.png) [@nopistons91](https://forums.speedlife.net/u/nopistons91)\
**Post date:** [April 7, 2010, 3:50am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/288 "2010-04-07T03:50:54Z")

</div>

I love these kind of build threads, good job man.

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [April 7, 2010, 5:57am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/289 "2010-04-07T05:57:29Z")

</div>

> [@deebo](#):
>
> where are you routing it to?

Straight down

---

<div class="post-metadata">

**Author:** ![KhoiFish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/khoifish/32/5409_2.png) [@KhoiFish](https://forums.speedlife.net/u/KhoiFish)\
**Post date:** [April 7, 2010, 7:46am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/290 "2010-04-07T07:46:53Z")

</div>

that motor is so cleeaan, as with everything else.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [April 7, 2010, 7:58am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/291 "2010-04-07T07:58:43Z")

</div>

3 things:

1. This build is awesome and clean… I appreciate all the attention to details… so don’t take my next two comments too hard

2. This radiator bracket sucks ass… at least round the corners or something…  
 ![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0873.jpg?t=1270342355](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0873.jpg?t=1270342355)

3. Open dump wastegates sound terrible.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [April 7, 2010, 7:58am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/292 "2010-04-07T07:58:58Z")

</div>

3 things:

1. This build is awesome and clean… I appreciate all the attention to details… so don’t take my next two comments too hard

2. This radiator bracket sucks ass… at least round the corners or something…  
 ![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0873.jpg?t=1270342355](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DSCN0873.jpg?t=1270342355)

3. Open dump wastegates sound terrible.

---

<div class="post-metadata">

**Author:** ![zero5672](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zero5672/32/5255_2.png) [@zero5672](https://forums.speedlife.net/u/zero5672)\
**Post date:** [April 7, 2010, 8:26am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/293 "2010-04-07T08:26:38Z")

</div>

Nice to see that breather box is getting put to good use! Wonder where you got that from lol

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [April 7, 2010, 8:45am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/294 "2010-04-07T08:45:28Z")

</div>

> [@newman](#):
>
> 3 things:
> 
> 1. This build is awesome and clean… I appreciate all the attention to details… so don’t take my next two comments too hard
> 2. This radiator bracket sucks ass… at least round the corners or something…
> 3. Open dump wastegates sound terrible.

-1. Thanks  
-2. Its just a mock up so I can mount the oil cooler. That’s the 2nd one I made so far, I use a vise and a hammer to bend steel which sucks…Not to worry the final product will look much better!  
-3. Yea I guess I havent grown out of it yet… Its basically just a easy out right now

> [@zero5672](#):
>
> Nice to see that breather box is getting put to good use! Wonder where you got that from lol

Yea you and your crew do good work! I need a radiator over flow…

---

<div class="post-metadata">

**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\
**Post date:** [April 7, 2010, 9:15am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/295 "2010-04-07T09:15:01Z")

</div>

route it so it goes behind the oil pan, do a search on evans forum!

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [April 7, 2010, 10:01am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/296 "2010-04-07T10:01:27Z")

</div>

> [@deebo](#):
>
> route it so it goes behind the oil pan, do a search on evans forum!

Why? What am I searching for?

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [April 7, 2010, 10:27am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/297 "2010-04-07T10:27:52Z")

</div>

basically you want them routed as far away from your intake as possible, what you have works and will work best at controlling boost (which it still wont do great at imo)

---

<div class="post-metadata">

**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\
**Post date:** [April 7, 2010, 11:14am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/298 "2010-04-07T11:14:14Z")

</div>

Hot exhaust gases coming out from there, best idea is to aim away from the engine/intake

[http://www.honda-tech.com/showthread.php?t=1904344](http://www.honda-tech.com/showthread.php?t=1904344)  
[http://www.honda-tech.com/showthread.php?t=1541607](http://www.honda-tech.com/showthread.php?t=1541607)

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [April 7, 2010, 12:04pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/299 "2010-04-07T12:04:34Z")

</div>

> [@Saxon](#):
>
> basically you want them routed as far away from your intake as possible, what you have works and will work best at controlling boost (which it still wont do great at imo)

The way I was looking at this is when the WG opens I should be moving (fast at that) so the exh shouldn’t be getting sucked into the intake… ?

In your opinion what’s the best way of controlling boost?

> [@deebo](#):
>
> Hot exhaust gases coming out from there, best idea is to aim away from the engine/intake
> 
> [dump tube ????? - Honda-Tech - Honda Forum Discussion](http://www.honda-tech.com/showthread.php?t=1904344)  
> [Evans Tunning!! Dump tube modification question - Honda-Tech - Honda Forum Discussion](http://www.honda-tech.com/showthread.php?t=1541607)

I was going to have it shoot out the side but I didn’t want a huge pipe under there, space is tight but Ill take another look. I’m out of town for a few weeks so there wont be any updates for awhile

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [April 12, 2010, 8:31am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/300 "2010-04-12T08:31:57Z")

</div>

430 HP, 1450 LB-FT Torque!

![http://i197.photobucket.com/albums/aa271/shrekb18/916a32.jpg?t=1271085733](http://i197.photobucket.com/albums/aa271/shrekb18/916a32.jpg?t=1271085733)

![http://i197.photobucket.com/albums/aa271/shrekb18/916a31.jpg?t=1271086094](http://i197.photobucket.com/albums/aa271/shrekb18/916a31.jpg?t=1271086094)

Thought Id share my new ride with you guys. Had 30 miles on it when I signed for it this weekend!

It’s a M916A3 6x6 Military Tractor made by Freightliner!

[Previous page](https://forums.speedlife.net/t/shrek-starting-over/65296.md?page=14)

[Next page](https://forums.speedlife.net/t/shrek-starting-over/65296.md?page=16)
