# SHREK - Starting over

**URL:** <https://forums.speedlife.net/t/shrek-starting-over/65296>\
**Category:** Builds\
**Created:** [March 29, 2009, 6:57pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296 "2009-03-29T18:57:32Z")\
**Posts on this page:** 20\
**Page:** 24

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [September 14, 2010, 1:34pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/461 "2010-09-14T13:34:12Z")

</div>

Haha, not trying to start a debate, just looking for clarity. It just looks and sounds silly to me.

Car looks great man:tup: Are you going to do any sort of (evo style) metal venting to clean up the hole or leave it raw?

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [September 14, 2010, 1:39pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/462 "2010-09-14T13:39:25Z")

</div>

> [@maxwell](#):
>
> Haha, not trying to start a debate, just looking for clarity. It just looks and sounds silly to me.
> 
> Car looks great man:tup: Are you going to do any sort of (evo style) metal venting to clean up the hole or leave it raw?

No worries

Um probably raw… I haven’t even installed the window trim or door seals… low on my priority list. Eventually I will get to all the odds & ends. I have the original hood that I may bring to a body shop and see what they can do, Im not to worried about weight.

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [September 14, 2010, 1:43pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/463 "2010-09-14T13:43:39Z")

</div>

> [@Shrek](#):
>
> No worries
> 
> Um probably raw… I haven’t even installed the window trim or door seals… low on my priority list. Eventually I will get to all the odds & ends. I have the original hood that I may bring to a body shop and see what they can do, Im not to worried about weight.

Haha yeah i’d be much more worried about TRACTION with that set-up. I’m glad to see your priority list is proper.

Looking forward to tuning results:tup:

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [September 15, 2010, 11:42am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/464 "2010-09-15T11:42:24Z")

</div>

> [@Saxon](#):
>
> btw any way you can update your first post at the bottom and list the current setup?

1994 Honda Civic

GSR head, Supertech Valves, Springs & Retainers  
Skunk2 Pro1 cams  
Toda racing adj cam gears  
Ed Victor-X  
65mm TB  
Skunk2 fuel rail  
Fuelab Mini regulator 90psi base  
1000cc injectors/044 Bosh inline pump  
Walbro 255 in tank pump

84mm LS block Sleeved buy Z10  
GSR micro polished crank OEM bearings  
Eagle Rods 3/8 Bolts  
Wiseco pistons 8.4:1  
ARP main studs  
ARP Head studs  
Fluidamper  
Z10 LS Main Gridle  
Moroso oil pan / pick up

Stock GSR TRASMISTION  
Fidanza alum flywheel (7.5lbs)  
ARP Pressure plate Bolts  
ARP flywheel bolts  
Exedy 4 puck clutch

AFI top mount manifold/ 4" down pipe  
GT35R/40R  
Tail 44mm WG  
Tail 50mm BOV  
Full race front mount back door intercooler  
SVE 3 bar MAP sensor  
Custom crank case ventilation setup

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [September 15, 2010, 12:26pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/465 "2010-09-15T12:26:07Z")

</div>

with that setup, i honestly see 500whp on pump gas to be noooo problem, and your fuel system is good to 700 on race 600 on e-85 depending on how much boost

any reason so low compression?

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [September 15, 2010, 1:19pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/466 "2010-09-15T13:19:00Z")

</div>

> [@Saxon](#):
>
> any reason so low compression?

No, not really…

---

<div class="post-metadata">

**Author:** ![Muckman](https://avatars.discourse-cdn.com/v4/letter/m/7ab992/32.png) [@Muckman](https://forums.speedlife.net/u/Muckman)\
**Post date:** [September 15, 2010, 1:29pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/467 "2010-09-15T13:29:46Z")

</div>

I’m at 90% duty cycle at 500hp on E85 with dual walbros at 55psi base, ID1000s.  
600hp would be a stretch with E85 on ID1000s

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [September 15, 2010, 1:42pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/468 "2010-09-15T13:42:05Z")

</div>

> [@Muckman](#):
>
> I’m at 90% duty cycle at 500hp on E85 with dual walbros at 55psi base, ID1000s.  
> 600hp would be a stretch with E85 on ID1000s

I’m not inventing anything here, Basically coping what many others have done. I think the 044 must help pick up the slack from the 255. I also think part of going to the dyno is to find the weak link so you can make it stronger.

Thanks for the reference

---

<div class="post-metadata">

**Author:** ![Muckman](https://avatars.discourse-cdn.com/v4/letter/m/7ab992/32.png) [@Muckman](https://forums.speedlife.net/u/Muckman)\
**Post date:** [September 15, 2010, 2:01pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/469 "2010-09-15T14:01:19Z")

</div>

Im sure you’ve seen Tony1’s pump combo reference chart for the ID1000s.  
He says 550-600hp on E85 with a walbro/bosch combo but thats at 100psi.

 ![http://i609.photobucket.com/albums/tt173/t1race/Pumpcombologo.jpg](http://i609.photobucket.com/albums/tt173/t1race/Pumpcombologo.jpg)

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [September 15, 2010, 2:05pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/470 "2010-09-15T14:05:23Z")

</div>

So Im good then

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [September 15, 2010, 5:42pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/471 "2010-09-15T17:42:40Z")

</div>

muckman, ya thats what i said 600hp should be maxing e-85, he has the regulator and enough pressure, obviously it will run out of breathe around there though

lmk when your going to be down there, id love to meet up with ya but i work that day untill 5

to be honest with that compression you should be able to do mid 500’s on pump gas, all IMO and of course I would wait and see what it baselines at because not every setup will make the same power

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [September 16, 2010, 9:59am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/472 "2010-09-16T09:59:12Z")

</div>

500 93  
600 E85  
Sounds good to me.

So the Evo battery I was using for the winch just wasnt cutting it.  
Picked this up at NAPA. CA 810 CCA 610 RA 150  
 ![http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DP810.jpg?t=1284656061](http://i197.photobucket.com/albums/aa271/shrekb18/newshrek/DP810.jpg?t=1284656061)

---

<div class="post-metadata">

**Author:** ![juicedz4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/juicedz4/32/5051_2.png) [@juicedz4](https://forums.speedlife.net/u/juicedz4)\
**Post date:** [September 21, 2010, 5:34pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/473 "2010-09-21T17:34:59Z")

</div>

Good luck tomorrow!!!

Dan

---

<div class="post-metadata">

**Author:** ![juicedz4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/juicedz4/32/5051_2.png) [@juicedz4](https://forums.speedlife.net/u/juicedz4)\
**Post date:** [September 22, 2010, 10:21am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/474 "2010-09-22T10:21:45Z")

</div>

Or acutaly, your appt was the 21st… How did it go!!!

Dan

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [September 22, 2010, 10:24am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/475 "2010-09-22T10:24:40Z")

</div>

> [@juicedz4](#):
>
> Or acutaly, your appt was the 21st… How did it go!!!
> 
> Dan

It was going very well, then spun a bearing

---

<div class="post-metadata">

**Author:** ![juicedz4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/juicedz4/32/5051_2.png) [@juicedz4](https://forums.speedlife.net/u/juicedz4)\
**Post date:** [September 22, 2010, 10:27am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/476 "2010-09-22T10:27:48Z")

</div>

damn man 🖕

---

<div class="post-metadata">

**Author:** ![Muckman](https://avatars.discourse-cdn.com/v4/letter/m/7ab992/32.png) [@Muckman](https://forums.speedlife.net/u/Muckman)\
**Post date:** [September 22, 2010, 10:28am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/477 "2010-09-22T10:28:57Z")

</div>

Aww shit. WTF happened?!  
How far did you guys get in the session?

---

<div class="post-metadata">

**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\
**Post date:** [September 22, 2010, 10:31am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/478 "2010-09-22T10:31:16Z")

</div>

Oh no!! What happened ☹ ☹

---

<div class="post-metadata">

**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\
**Post date:** [September 22, 2010, 10:43am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/479 "2010-09-22T10:43:05Z")

</div>

eek, that blows

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [September 22, 2010, 10:44am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/480 "2010-09-22T10:44:33Z")

</div>

> [@juicedz4](#):
>
> damn man 🖕

> [@Muckman](#):
>
> Aww shit. WTF happened?!  
> How far did you guys get in the session?

> [@neonglh](#):
>
> Oh no!! What happened ☹ ☹

It hasn’t totally sank in yet… really discouraged right now. I don’t know what happened. The theory’s I have heard so far… To high of oil temp, to tight of clearance, oil pump failure.

Anyways… I have to take it apart. And even then who knows if I will be able to tell.

I was real nerves the first few pulls, then when everything was going well I started to relax and actually had a big smile when this thing started making power. Sounded so good…

We were about 4hrs into it. Tuner was real good, let things cool, checked plugs every pull…

We got to 425 @ 14psi… goal was 20psi

[Previous page](https://forums.speedlife.net/t/shrek-starting-over/65296.md?page=23)

[Next page](https://forums.speedlife.net/t/shrek-starting-over/65296.md?page=25)
