# SHREK - Starting over

**URL:** <https://forums.speedlife.net/t/shrek-starting-over/65296>\
**Category:** Builds\
**Created:** [March 29, 2009, 6:57pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296 "2009-03-29T18:57:32Z")\
**Posts on this page:** 20\
**Page:** 30

<div class="post-metadata">

**Author:** ![specv118](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/specv118/32/5931_2.png) [@specv118](https://forums.speedlife.net/u/specv118)\
**Post date:** [October 26, 2010, 9:05am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/581 "2010-10-26T09:05:09Z")

</div>

This was more depressing then my car and all its problems over the last 3 years (2.5 motors, 2 turbo setups, now putting around n/a…)

☹

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [February 20, 2011, 2:35pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/582 "2011-02-20T14:35:12Z")

</div>

Well finally all moved and found my build sheet from the Engine assembly…

Clevite bearings were used  
Clearance - M=mains R=rods

M1 .0011  
M2 .0011  
M3 .0012  
M4 .0014

R1 .0013  
R2 .0012  
R3 .0012  
R4 .0011

Piston to bore clearance

C1 .003  
C2 .003  
C3 .0032  
C4 .003

You guys can see this was a little tight… I just had my evo tuned and got to talk to the shops Honda guy… Said my mains should be .0020 to .0025 and my piston to bore should be .004 to .005.

What do you guys think? I didn’t ask him about the rod clearance but I would guess that should be the same as the mains???

---

<div class="post-metadata">

**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\
**Post date:** [February 20, 2011, 3:01pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/583 "2011-02-20T15:01:43Z")

</div>

all those clearances can be honed to fit, and crank can be polished by a machine shop to fit. much better tight than loose, and you’re not far off. I’m no honda guru, so I can’t help with clearance numbers other than honda spec.

---

<div class="post-metadata">

**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\
**Post date:** [February 20, 2011, 3:30pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/584 "2011-02-20T15:30:34Z")

</div>

> [@Shrek](#):
>
> Well finally all moved and found my build sheet from the Engine assembly…
> 
> Clevite bearings were used  
> Clearance - M=mains R=rods
> 
> M1 .0011  
> M2 .0011  
> M3 .0012  
> M4 .0014
> 
> R1 .0013  
> R2 .0012  
> R3 .0012  
> R4 .0011
> 
> Piston to bore clearance
> 
> C1 .003  
> C2 .003  
> C3 .0032  
> C4 .003
> 
> You guys can see this was a little tight… I just had my evo tuned and got to talk to the shops Honda guy… Said my mains should be .0020 to .0025 and my piston to bore should be .004 to .005.
> 
> What do you guys think? I didn’t ask him about the rod clearance but I would guess that should be the same as the mains???

> [@Spam16v](#):
>
> all those clearances can be honed to fit, and crank can be polished by a machine shop to fit. much better tight than loose, and you’re not far off. I’m no honda guru, so I can’t help with clearance numbers other than honda spec.

Those were the clearances of the motor that spun 3 out of 4 rod bearings on the dyno… The definitive answer of WHY is still under investigation… I think a combination of a few things… Round 3 or maybe 4 is in effect. I lost track of my fail count…

---

<div class="post-metadata">

**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\
**Post date:** [September 24, 2012, 2:53pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/585 "2012-09-24T14:53:27Z")

</div>

SOLD.

---

<div class="post-metadata">

**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\
**Post date:** [September 24, 2012, 2:56pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/586 "2012-09-24T14:56:57Z")

</div>

cool bump…

---

<div class="post-metadata">

**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\
**Post date:** [September 24, 2012, 3:50pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/587 "2012-09-24T15:50:21Z")

</div>

Disappointed that this was the bump

---

<div class="post-metadata">

**Author:** ![honda4life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/honda4life/32/5300_2.png) [@honda4life](https://forums.speedlife.net/u/honda4life)\
**Post date:** [September 24, 2012, 5:26pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/588 "2012-09-24T17:26:46Z")

</div>

Gennaro you buy this? Lol

---

<div class="post-metadata">

**Author:** ![VtaKKKickingIN](https://avatars.discourse-cdn.com/v4/letter/v/ed655f/32.png) [@VtaKKKickingIN](https://forums.speedlife.net/u/VtaKKKickingIN)\
**Post date:** [September 24, 2012, 9:07pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/589 "2012-09-24T21:07:16Z")

</div>

is there a ending to this fantastic story of this really sweet car?..don’t leave me hanging!

---

<div class="post-metadata">

**Author:** ![honda4life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/honda4life/32/5300_2.png) [@honda4life](https://forums.speedlife.net/u/honda4life)\
**Post date:** [September 25, 2012, 4:12am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/590 "2012-09-25T04:12:08Z")

</div>

> [@VtaKKKickingIN](#):
>
> is there a ending to this fantastic story of this really sweet car?..don’t leave me hanging!

I remember when I read the whole story some serious hours and work was put into this bad boy!

---

<div class="post-metadata">

**Author:** ![turbominime4door](https://avatars.discourse-cdn.com/v4/letter/t/bbe5ce/32.png) [@turbominime4door](https://forums.speedlife.net/u/turbominime4door)\
**Post date:** [October 6, 2012, 8:09am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/591 "2012-10-06T08:09:01Z")

</div>

JJ or Joe hit me up yesterday and said Shrek is in its new home so hopefully by spring it will be ripping up a track near you!

---

<div class="post-metadata">

**Author:** ![Jam](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jam/32/7235_2.png) [@Jam](https://forums.speedlife.net/u/Jam)\
**Post date:** [June 22, 2013, 1:03am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/592 "2013-06-22T01:03:15Z")

</div>

Bump bc I saw this on cl the other day. Shrek, that you?

[http://rochester.craigslist.org/cto/3832578227.html](http://rochester.craigslist.org/cto/3832578227.html)

---

<div class="post-metadata">

**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\
**Post date:** [June 27, 2013, 6:37am UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/593 "2013-06-27T06:37:13Z")

</div>

The new owner should be updating this thread or making a new one instead of sending me pics from his shitty cell phone fggt!

---

<div class="post-metadata">

**Author:** ![Henry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/henry/32/5920_2.png) [@Henry](https://forums.speedlife.net/u/Henry)\
**Post date:** [July 19, 2013, 2:21pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/594 "2013-07-19T14:21:34Z")

</div>

Just wanted to update this. I’m not making a new thread since everything is the same. I bought this car off SHREK about a year ago. I’ve known him for a few years and helped him a few times when he owned this car. Has a new crank (un cut) and bearings. When it was delivered it was still partially disassembled. I figured I might as well tear it the rest apart and paint it. All you teal fans sorry. Still have some assembling to finish up. Haven’t started it yet, still have wiring and small things to finish. Only things I’ve changed from SHREKS setup was I eliminated the remote oil filter and oil cooler, bought a new oil pump, ACT clutch and flywheel.

 ![http://i43.tinypic.com/2w2helz.jpg](http://i43.tinypic.com/2w2helz.jpg)

---------- Post added at 02:18 PM ---------- Previous post was at 02:13 PM ----------

![http://i40.tinypic.com/34rx7oh.jpg](http://i40.tinypic.com/34rx7oh.jpg) ![http://i42.tinypic.com/md2jb7.jpg](http://i42.tinypic.com/md2jb7.jpg) ![http://i39.tinypic.com/28qz0qv.jpg](http://i39.tinypic.com/28qz0qv.jpg) ![http://i42.tinypic.com/2djrtvq.jpg](http://i42.tinypic.com/2djrtvq.jpg) ![http://i44.tinypic.com/14xjcxt.jpg](http://i44.tinypic.com/14xjcxt.jpg) ![http://i40.tinypic.com/se1yth.jpg](http://i40.tinypic.com/se1yth.jpg) ![http://i40.tinypic.com/vnpb2c.jpg](http://i40.tinypic.com/vnpb2c.jpg) ![http://i43.tinypic.com/1235bw4.jpg](http://i43.tinypic.com/1235bw4.jpg)

---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------

 ![http://i40.tinypic.com/2d82m47.jpg](http://i40.tinypic.com/2d82m47.jpg) ![http://i43.tinypic.com/oavu4p.jpg](http://i43.tinypic.com/oavu4p.jpg) ![http://i39.tinypic.com/2lo0qk7.jpg](http://i39.tinypic.com/2lo0qk7.jpg)

 ![http://i40.tinypic.com/ifykp5.jpg](http://i40.tinypic.com/ifykp5.jpg)

---

<div class="post-metadata">

**Author:** ![livin4hockey](https://avatars.discourse-cdn.com/v4/letter/l/d2c977/32.png) [@livin4hockey](https://forums.speedlife.net/u/livin4hockey)\
**Post date:** [July 19, 2013, 2:41pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/595 "2013-07-19T14:41:17Z")

</div>

Good to see it back in progress again :tup:

---

<div class="post-metadata">

**Author:** ![Jeller](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jeller](https://forums.speedlife.net/u/Jeller)\
**Post date:** [July 19, 2013, 3:05pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/596 "2013-07-19T15:05:41Z")

</div>

Very cool and I like the gray color :tup:

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [July 19, 2013, 3:11pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/597 "2013-07-19T15:11:51Z")

</div>

I used to LOVE this thread. This made my day seeing that it may actually get finished soon.

---

<div class="post-metadata">

**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\
**Post date:** [July 19, 2013, 6:13pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/598 "2013-07-19T18:13:36Z")

</div>

Awesome that this is being continued. I always enjoyed reading this thread. Tim doing well too ?

---

<div class="post-metadata">

**Author:** ![Henry](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/henry/32/5920_2.png) [@Henry](https://forums.speedlife.net/u/Henry)\
**Post date:** [July 19, 2013, 7:17pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/599 "2013-07-19T19:17:25Z")

</div>

> [@deebo](#):
>
> Awesome that this is being continued. I always enjoyed reading this thread. Tim doing well too ?

Doing very well. Been working on the evo a lot. I told him I updated his thread with a few pictures, so I’m sure he will be commenting shortly.

---

<div class="post-metadata">

**Author:** ![honda4life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/honda4life/32/5300_2.png) [@honda4life](https://forums.speedlife.net/u/honda4life)\
**Post date:** [July 19, 2013, 7:27pm UTC](https://forums.speedlife.net/t/shrek-starting-over/65296/600 "2013-07-19T19:27:39Z")

</div>

Awesome so you know turbominime4door? We were talking about this car a couple months ago!

[Previous page](https://forums.speedlife.net/t/shrek-starting-over/65296.md?page=29)

[Next page](https://forums.speedlife.net/t/shrek-starting-over/65296.md?page=31)
