# Shreks boosted GSR Build **URL:** \ **Category:** Builds\ **Created:** [July 13, 2007, 1:01pm UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325 "2007-07-13T13:01:27Z")\ **Posts on this page:** 20\ **Page:** 13
**Author:** ![dftsilvia](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dftsilvia/32/7447_2.png) [@dftsilvia](https://forums.speedlife.net/u/dftsilvia)\ **Post date:** [May 6, 2008, 12:56pm UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/241 "2008-05-06T12:56:53Z")
you dont have a maf so technically you wouldnt have to worry about it. but i would prolly still block it off with a cap ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [May 7, 2008, 8:08am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/242 "2008-05-07T08:08:26Z")
Whats a maf? ---
**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\ **Post date:** [May 7, 2008, 8:30am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/243 "2008-05-07T08:30:27Z")
> [@Shrek](#): > > Whats a maf? Mass Air Flow sensor, it’s a sensor that is usually in the intake tube of a car and measures the air flow with a heated wire. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [May 7, 2008, 8:57am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/244 "2008-05-07T08:57:53Z")
> [@JDMjunkie](#): > > Mass Air Flow sensor, it’s a sensor that is usually in the intake tube of a car and measures the air flow with a heated wire. Ok thanks, I dont remember what happend to this…lol Update: When the nut came loose it F-ed up the ID of the pulley. My buddy hooked me up and bored out the ID of the pulley just to true it up then made me a nut out of Hex stock. The nut pilots the ID of the pulley and the ID of the shaft of the alternator he also counter bored it so I can tighten it with out using a impact ---
**Author:** ![LUKE\_L](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luke_l/32/7462_2.png) [@LUKE\_L](https://forums.speedlife.net/u/LUKE_L)\ **Post date:** [May 7, 2008, 9:53am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/245 "2008-05-07T09:53:48Z")
Sounds like a Nice fix…Maybe Hard to tell with it all put together…How does the pulley stop the Alt. shaft/Nut/Nut sleeve or whatnot from spinning again? If the shaft and ID of the pulley were tapered then the compression from the nut would prevent it from ever spinining. But, I would guess there is no taper if your buddy just bored it out. If the nut is not a locking nut could there still be the potential of the nut backing off under high RPMs? Lastly, is there a key and keyway? Or is the only thing holding this in place the compression caused by the nut on the pulley itself? I am just afraid it will fall off on you again and that would SUCK. Sweet Car BTW :tup: ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [May 7, 2008, 10:12am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/246 "2008-05-07T10:12:44Z")
There’s no taper, Threads work by holding things together (compression). We made sure the nut wouldn’t bottom before it was tight. We also used medium lock tight. Think it will work but I’ll keep an eye on it! ---
**Author:** ![LUKE\_L](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luke_l/32/7462_2.png) [@LUKE\_L](https://forums.speedlife.net/u/LUKE_L)\ **Post date:** [May 7, 2008, 10:35am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/247 "2008-05-07T10:35:05Z")
> [@Shrek](#): > > We also used medium lock tight. Good move…You should be fine. Can’t wait to see this finished. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [May 7, 2008, 10:39am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/248 "2008-05-07T10:39:20Z")
> [@LUKE\_L](#): > > Good move…You should be fine. > > Can’t wait to see this finished. So do I! Should be in Buffalo getting tuned Friday! But its far from finished… ---
**Author:** ![rage87](https://avatars.discourse-cdn.com/v4/letter/r/9e8a1a/32.png) [@rage87](https://forums.speedlife.net/u/rage87)\ **Post date:** [May 7, 2008, 10:55am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/249 "2008-05-07T10:55:17Z")
> [@JDMjunkie](#): > > Mass Air Flow sensor, it’s a sensor that is usually in the intake tube of a car and measures the air flow with a heated wire. Honda’s don’t have MAFs. They only have MAPs. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [May 7, 2008, 11:10am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/250 "2008-05-07T11:10:45Z")
> [@rage87](#): > > Honda’s don’t have MAFs. They only have MAPs. Thats what I thought… Thanks ---
**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\ **Post date:** [May 7, 2008, 1:10pm UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/251 "2008-05-07T13:10:02Z")
> [@rage87](#): > > Honda’s don’t have MAFs. They only have MAPs. no shit, i know this. he asked what a MAF was and i explained to him what it was. ---
**Author:** ![Toda\_Party](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/toda_party/32/7354_2.png) [@Toda\_Party](https://forums.speedlife.net/u/Toda_Party)\ **Post date:** [May 7, 2008, 4:22pm UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/252 "2008-05-07T16:22:09Z")
why the AEM pulley anyway? ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [May 7, 2008, 6:20pm UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/253 "2008-05-07T18:20:08Z")
AEM = High performance It came with the Alt. ---
**Author:** ![Karter](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@Karter](https://forums.speedlife.net/u/Karter)\ **Post date:** [May 7, 2008, 6:25pm UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/254 "2008-05-07T18:25:30Z")
> [@Shrek](#): > > AEM = **BLING** > > It came with the Alt. **Fixed\*** ---
**Author:** ![Big\_B](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/big_b/32/7490_2.png) [@Big\_B](https://forums.speedlife.net/u/Big_B)\ **Post date:** [May 7, 2008, 7:10pm UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/255 "2008-05-07T19:10:15Z")
nice build man ---
**Author:** ![yellow350Z](https://avatars.discourse-cdn.com/v4/letter/y/85f322/32.png) [@yellow350Z](https://forums.speedlife.net/u/yellow350Z)\ **Post date:** [May 8, 2008, 2:06am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/256 "2008-05-08T02:06:26Z")
nice set up! ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [May 9, 2008, 6:52am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/257 "2008-05-09T06:52:02Z")
![http://i197.photobucket.com/albums/aa271/shrekb18/0509080941a.jpg?t=1210341007](http://i197.photobucket.com/albums/aa271/shrekb18/0509080941a.jpg?t=1210341007) Getting tuned at 2 today! ---
**Author:** ![BluBalls](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bluballs/32/7212_2.png) [@BluBalls](https://forums.speedlife.net/u/BluBalls)\ **Post date:** [May 9, 2008, 7:58am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/258 "2008-05-09T07:58:02Z")
In for graphs ---
**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\ **Post date:** [May 9, 2008, 9:13am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/259 "2008-05-09T09:13:07Z")
Nice! in for numbers and graph…GL dude! ---
**Author:** ![Goldenboy](https://avatars.discourse-cdn.com/v4/letter/g/c2a13f/32.png) [@Goldenboy](https://forums.speedlife.net/u/Goldenboy)\ **Post date:** [May 9, 2008, 9:49am UTC](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325/260 "2008-05-09T09:49:35Z")
Only a street tune, no numbers or graphs today [Previous page](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325.md?page=12) [Next page](https://forums.speedlife.net/t/shreks-boosted-gsr-build/32325.md?page=14)