# Shrek's new DD - 03 Evo VIII **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [May 13, 2010, 7:50pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975 "2010-05-13T19:50:09Z")\ **Posts on this page:** 20\ **Page:** 9
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [January 31, 2011, 8:15am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/161 "2011-01-31T08:15:35Z")
> [@neonglh](#): > > I’m not quite sure what you would need a COP setup for. After seeing Cesna go mid 9’s on the stock motor, with the stock ignition, it just doesn’t seem like it would be needed until you’re going for DEEP into the 9’s. True, definitely don’t need it. I could have bought a new set of wires for 45 or a used stock set up on EvoM for 80 to 100 bucks. I think I just like the idea of having 4 coils over 2! Taken from [Spoolinup.com](http://Spoolinup.com) - \* Handle 650+ HP, tested to 800whp \* Plug-n-Play \* Meant for Stock ECU \* Gain HP/TQ (8-20 hp is the norm, mod dependent) \* Greatly reduce or eliminate partial throttle cruise bucking \* Better idle quality \* Acclerates like a new car \* Run more boost \* 4 coils instead of 2 \* Hotter spark \* Run more gap for better ignition \* Plugs last longer due to less fouling \* No wimpy spark plug wires to worry about \* Plug changes take minutes less \* Increased gas mileage (I get 1-2 mpg better mostly highway) \* Lightest kit available at 2 lb 6 oz, 1/2 lb heavier than stock \* No problem prone CDI Boxes \* Looks great! \* Non corrosive hardware will keep it looking great! \* Beautiful Carbon Fiber mounting plate \* Directions included \* Tested on a running car \* 6 Month Warranty ---
**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\ **Post date:** [January 31, 2011, 8:17am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/162 "2011-01-31T08:17:20Z")
Yeah, this is true ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [February 1, 2011, 8:13am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/163 "2011-02-01T08:13:45Z")
i wonder if you could have just bought some k20a coils and wired them in ---
**Author:** ![nytalonTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nytalontsi/32/5399_2.png) [@nytalonTSi](https://forums.speedlife.net/u/nytalonTSi)\ **Post date:** [February 1, 2011, 8:59am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/164 "2011-02-01T08:59:33Z")
> [@Saxon](#): > > i wonder if you could have just bought some k20a coils and wired them in They actually have done this. There was a thread on evom over the summer with a guy that swapped in some k20 coils. Takes little fab. ---
**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\ **Post date:** [February 1, 2011, 10:29am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/165 "2011-02-01T10:29:23Z")
> [@1G2GDSM](#): > > Highlight the hex, then on your keyboard use the = sign and type in the value 0x0001, enter. You can also just press + when you are in the box, and it will change between 0 and 1. ---
**Author:** ![nytalonTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nytalontsi/32/5399_2.png) [@nytalonTSi](https://forums.speedlife.net/u/nytalonTSi)\ **Post date:** [February 1, 2011, 3:19pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/166 "2011-02-01T15:19:19Z")
> [@neonglh](#): > > You can also just press + when you are in the box, and it will change between 0 and 1. Yeah but when you use the 0x0001 method It disables all the emissions stuff completely, rather then each box 1 by 1. Either way works though. ---
**Author:** ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)\ **Post date:** [February 3, 2011, 11:19am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/167 "2011-02-03T11:19:48Z")
dropping the 0001 bomb into the periphery bits is the way to go, just make sure you set your monitors to ready also. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [February 4, 2011, 5:25pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/168 "2011-02-04T17:25:03Z")
> [@neonglh](#): > > You can also just press + when you are in the box, and it will change between 0 and 1. > [@1G2GDSM](#): > > Yeah but when you use the 0x0001 method It disables all the emissions stuff completely, rather then each box 1 by 1. Either way works though. > [@psphinx81](#): > > dropping the 0001 bomb into the periphery bits is the way to go, just make sure you set your monitors to ready also. Right ok haven’t gotten to this part yet… But thanks! Once I get this back together I’m sure I will need some tech support I’m looking into installing a slim fan also. Anyone know how much the stock fan weights vs. a typical slim fan? I still haven’t found the definitive wiring “how to” either…HELP Please! About a 100 decisions to make when buying a slim fan - Amp draw, # of blades, Fan CFM, Pusher/puller, blade material? Any advise! I want a lighter fan that takes up less room but works just as well if not better and doesn’t draw more amps then stock. I’m also thinking a pusher rather then puller so I can mount it between the FMIC and radiator and clean up the bay! ---
**Author:** ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)\ **Post date:** [February 4, 2011, 5:32pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/169 "2011-02-04T17:32:24Z")
I have a puller type slim fan in my civic, it’s just two wires that I soldered to the factory two wire plug, if that makes sense. Basically cut the plug off the old fan and soldered it to the wires of the new fan… I wish it was a pusher and wasn’t in the bay but w/evs, it came with the car. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [February 4, 2011, 6:00pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/170 "2011-02-04T18:00:20Z")
> [@ieatpaint](#): > > I have a puller type slim fan in my civic, it’s just two wires that I soldered to the factory two wire plug, if that makes sense. Basically cut the plug off the old fan and soldered it to the wires of the new fan… I wish it was a pusher and wasn’t in the bay but w/evs, it came with the car. Well yes true on a Civic… I have a civic with a slim fan also, honda’s are easy lol. The Evo has a box on the fan which has 4 wires. I think the fan has variable speeds depending on conditions but thats just from reading stuff on EvoM and like every forum its not always easy to tell whats true vs opinion. I also read that the other 2 wires are connected to the A/C fan and they some how worked together before my A/C was removed. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [February 5, 2011, 5:12pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/171 "2011-02-05T17:12:37Z")
![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1288.jpg?t=1296953381](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1288.jpg?t=1296953381) With Army Navy fittings! ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1305.jpg?t=1297123501](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1305.jpg?t=1297123501) ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1303.jpg?t=1297123501](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1303.jpg?t=1297123501) ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1302.jpg?t=1297123501](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1302.jpg?t=1297123501) ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [February 5, 2011, 8:04pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/172 "2011-02-05T20:04:47Z")
looks nice, did you paint it yourself? i really want to coat mine but they are stupid expensive! ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [February 5, 2011, 8:32pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/173 "2011-02-05T20:32:34Z")
Powder coated, cost me 50. ---
**Author:** ![nytalonTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nytalontsi/32/5399_2.png) [@nytalonTSi](https://forums.speedlife.net/u/nytalonTSi)\ **Post date:** [February 6, 2011, 12:33pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/174 "2011-02-06T12:33:06Z")
Nice! ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [February 7, 2011, 4:23pm UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/175 "2011-02-07T16:23:23Z")
Picked this up for cheap… cant believe how heavy duty this is. Must weigh 3lbs if not more. ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1291.jpg?t=1297123680](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1291.jpg?t=1297123680) 19 parts total make this up. Not sure this will go on my car or not ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1293.jpg?t=1297123724](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1293.jpg?t=1297123724) ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1295.jpg?t=1297123767](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1295.jpg?t=1297123767) ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1294.jpg?t=1297123767](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1294.jpg?t=1297123767) Another trick new part! ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1292.jpg?t=1297123830](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1292.jpg?t=1297123830) Still figuring out how I’m going to attack the P/S cooler lines. ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1296.jpg?t=1297123911](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1296.jpg?t=1297123911) Id like to remove the aluminum line here. ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1297.jpg?t=1297123962](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1297.jpg?t=1297123962) Removed stock over flow, looks cleaner already! ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1299.jpg?t=1297124076](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1299.jpg?t=1297124076) ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1300.jpg?t=1297124076](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1300.jpg?t=1297124076) Old vs. New ![http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1301.jpg?t=1297124139](http://i197.photobucket.com/albums/aa271/shrekb18/03%20EVO%20VIII/DSCN1301.jpg?t=1297124139) ---
**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\ **Post date:** [February 8, 2011, 7:00am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/176 "2011-02-08T07:00:28Z")
Where does the STM one go? I have one that they made custom for my half radiator, but I haven’t seen their production one yet. ---
**Author:** ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)\ **Post date:** [February 8, 2011, 7:27am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/177 "2011-02-08T07:27:35Z")
Looks slick. I like that piece. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [February 8, 2011, 7:47am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/178 "2011-02-08T07:47:30Z")
> [@neonglh](#): > > Where does the STM one go? I have one that they made custom for my half radiator, but I haven’t seen their production one yet. > [@TrueBlue](#): > > Looks slick. I like that piece. ![http://www.streettunedmotorsports.com/parts/b/stm_evo_coolant_overflow_reservoir2.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/c/4/c4a0a19aff06de1e17a5dfcd80c95fc93fd605f1.jpeg) ---
**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\ **Post date:** [February 8, 2011, 8:12am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/179 "2011-02-08T08:12:24Z")
All, so it won’t work if you have A/C then ☹ That’s where that condenser tube thing goes. ---
**Author:** ![Shrek](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shrek/32/7364_2.png) [@Shrek](https://forums.speedlife.net/u/Shrek)\ **Post date:** [February 8, 2011, 11:36am UTC](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975/180 "2011-02-08T11:36:50Z")
True, wont work with A/C or the P/S cooler lines. [Previous page](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975.md?page=8) [Next page](https://forums.speedlife.net/t/shreks-new-dd-03-evo-viii/154975.md?page=10)