# Signal Lights Not Working

**URL:** <https://forums.speedlife.net/t/signal-lights-not-working/148746>\
**Category:** Canada Nissan Automotive\
**Created:** [April 2, 2008, 4:11pm UTC](https://forums.speedlife.net/t/signal-lights-not-working/148746 "2008-04-02T16:11:32Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)\
**Post date:** [April 2, 2008, 4:11pm UTC](https://forums.speedlife.net/t/signal-lights-not-working/148746/1 "2008-04-02T16:11:32Z")

</div>

So I have done an SR swap in my 240. I’ve been putting everything back into its place and tested out my signal lights but they don’t work. I do not hear any clicking noise and have checked all the fuses. I can’t find the relay for it. I then tried my 4-ways and they work, just can’t seem to figure out whats wrong with the singals. any one else have this problem after a swap and or just in general.

---

<div class="post-metadata">

**Author:** ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)\
**Post date:** [April 2, 2008, 10:26pm UTC](https://forums.speedlife.net/t/signal-lights-not-working/148746/2 "2008-04-02T22:26:16Z")

</div>

never mind figured it out! The contacts in my switch were dirty.i just blew it out and now it works.

---

<div class="post-metadata">

**Author:** ![JoshB1](https://avatars.discourse-cdn.com/v4/letter/j/8491ac/32.png) [@JoshB1](https://forums.speedlife.net/u/JoshB1)\
**Post date:** [April 5, 2008, 10:50am UTC](https://forums.speedlife.net/t/signal-lights-not-working/148746/3 "2008-04-05T10:50:59Z")

</div>

hmmm I’ll have to give that try, have the same problem.

---

<div class="post-metadata">

**Author:** ![uperformance](https://avatars.discourse-cdn.com/v4/letter/u/c89c15/32.png) [@uperformance](https://forums.speedlife.net/u/uperformance)\
**Post date:** [April 6, 2008, 5:46pm UTC](https://forums.speedlife.net/t/signal-lights-not-working/148746/4 "2008-04-06T17:46:15Z")

</div>

hmm i had the same thing in my 180, hazards worked, but no signals, in or out of the car.

but mine was just a 10 amp fuse.

---

<div class="post-metadata">

**Author:** ![SRS\_3](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@SRS\_3](https://forums.speedlife.net/u/SRS_3)\
**Post date:** [April 6, 2008, 5:54pm UTC](https://forums.speedlife.net/t/signal-lights-not-working/148746/5 "2008-04-06T17:54:36Z")

</div>

ya that could also be the case, but all my fuses were fine. i was doing alot of sandblasting and sanding to my car and at the time all the windows were out, so the dust setting in the switched cloged up the contacts. another issue i also had was my alternator fuse went aswell, but i had a spare one form my ka fuse box i just replaced.