# Sleeves locally **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [November 14, 2007, 9:06am UTC](https://forums.speedlife.net/t/sleeves-locally/193649 "2007-11-14T09:06:24Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![watacanga](https://avatars.discourse-cdn.com/v4/letter/w/85f322/32.png) [@watacanga](https://forums.speedlife.net/u/watacanga)\ **Post date:** [November 14, 2007, 9:06am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/1 "2007-11-14T09:06:24Z")
Is there anywhere to get sleeves done locally? It’s going to be a deal breaker if i have to send it to california to get it sleeved. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [November 14, 2007, 9:10am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/2 "2007-11-14T09:10:12Z")
buy wrayzors his is already done and don’t have to wait. his is a good deal ---
**Author:** ![watacanga](https://avatars.discourse-cdn.com/v4/letter/w/85f322/32.png) [@watacanga](https://forums.speedlife.net/u/watacanga)\ **Post date:** [November 14, 2007, 9:22am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/3 "2007-11-14T09:22:15Z")
i’m already getting a gsr block and using forged internals. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [November 14, 2007, 9:57am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/4 "2007-11-14T09:57:23Z")
don’t think anyone can do sleeving locally ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [November 14, 2007, 10:13am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/5 "2007-11-14T10:13:49Z")
changed my mind again, got crack money from somewhere else but anyways no one does sleeves local because they have to be pressed in ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [November 14, 2007, 10:50am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/6 "2007-11-14T10:50:12Z")
nope ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [November 14, 2007, 12:19pm UTC](https://forums.speedlife.net/t/sleeves-locally/193649/7 "2007-11-14T12:19:20Z")
I have 2 guys i believe can sleeve… its been a while since i’ve talked to them about it. they were going to 0-ring my 3sgte as well… some sleeves press in, some sweat in… i’d have to make a call to double check. ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [November 14, 2007, 4:49pm UTC](https://forums.speedlife.net/t/sleeves-locally/193649/8 "2007-11-14T16:49:41Z")
your better off on stock sleeves then trying to get a local shop to sleeve it ---
**Author:** ![watacanga](https://avatars.discourse-cdn.com/v4/letter/w/85f322/32.png) [@watacanga](https://forums.speedlife.net/u/watacanga)\ **Post date:** [November 14, 2007, 5:09pm UTC](https://forums.speedlife.net/t/sleeves-locally/193649/9 "2007-11-14T17:09:51Z")
well i’m gona buy steve’s gsr block and he said it’s bored to 81.25. i have no idea where to get pistons for that and how much boost should i be able to run on that bore? ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [November 14, 2007, 5:16pm UTC](https://forums.speedlife.net/t/sleeves-locally/193649/10 "2007-11-14T17:16:43Z")
> [@Audi 2.7t diverters](https://forums.speedlife.net/t/audi-2-7t-diverters/33388/8): > > well i’m gona buy steve’s gsr block and he said it’s bored to 81.25. i have no idea where to get pistons for that and how much boost should i be able to run on that bore? key to that is are the cyl clean or is it gong to need honed more? Anymore those cyl walls are getting pretty thin 😉 ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [November 14, 2007, 6:59pm UTC](https://forums.speedlife.net/t/sleeves-locally/193649/11 "2007-11-14T18:59:47Z")
Boost is ok up to 81.5. alot of people do it anyway just to make sure the a truly round. people make 600+ on stock sleeves the trick is in the tune… ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [November 15, 2007, 4:48am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/12 "2007-11-15T04:48:28Z")
> [@Well this is not good](https://forums.speedlife.net/t/well-this-is-not-good/33446/16): > > key to that is are the cyl clean or is it gong to need honed more? Anymore those cyl walls are getting pretty thin 😉 As far as I can mic them, they are fine…just need a hone from sitting for a while. It should be hot tanked, so they’ll check it then. ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [November 15, 2007, 5:08am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/13 "2007-11-15T05:08:59Z")
> [@dyingwish"](#): > > As far as I can mic them, they are fine…just need a hone from sitting for a while. It should be hot tanked, so they’ll check it then. cool, well goodluck watacanga ---
**Author:** ![watacanga](https://avatars.discourse-cdn.com/v4/letter/w/85f322/32.png) [@watacanga](https://forums.speedlife.net/u/watacanga)\ **Post date:** [November 15, 2007, 8:33am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/14 "2007-11-15T08:33:55Z")
thanks guys, i’ve learned almost everything i know from one of the three of you. it’s kyle if you were wondering ---
**Author:** ![FourGee6Tee3](https://avatars.discourse-cdn.com/v4/letter/f/b5ac83/32.png) [@FourGee6Tee3](https://forums.speedlife.net/u/FourGee6Tee3)\ **Post date:** [November 18, 2007, 1:17pm UTC](https://forums.speedlife.net/t/sleeves-locally/193649/15 "2007-11-18T13:17:47Z")
> [@club w ride today, sunday](https://forums.speedlife.net/t/club-w-ride-today-sunday/33444/17): > > don’t think anyone can do sleeving locally Not True. ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [November 19, 2007, 4:48am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/16 "2007-11-19T04:48:29Z")
> [@i need help with math](https://forums.speedlife.net/t/i-need-help-with-math/33471/26): > > Not True. Worthless without elaboration. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [November 19, 2007, 6:20am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/17 "2007-11-19T06:20:01Z")
i know of iron block V8s done locally. but not too sure on honda blocks though ---
**Author:** ![watacanga](https://avatars.discourse-cdn.com/v4/letter/w/85f322/32.png) [@watacanga](https://forums.speedlife.net/u/watacanga)\ **Post date:** [November 19, 2007, 7:31am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/18 "2007-11-19T07:31:18Z")
i’ll probably just send it to darton indiana. i think they’re like 550 or so which is alot cheaper than sending it to california. ---
**Author:** ![wrayzor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wrayzor/32/6021_2.png) [@wrayzor](https://forums.speedlife.net/u/wrayzor)\ **Post date:** [November 19, 2007, 11:33am UTC](https://forums.speedlife.net/t/sleeves-locally/193649/19 "2007-11-19T11:33:53Z")
remember that you get what ya pay for when it comes to performance don’t try to take the shortcut cuz the outcome most likely won’t be pleasant ---
**Author:** ![FourGee6Tee3](https://avatars.discourse-cdn.com/v4/letter/f/b5ac83/32.png) [@FourGee6Tee3](https://forums.speedlife.net/u/FourGee6Tee3)\ **Post date:** [November 19, 2007, 7:58pm UTC](https://forums.speedlife.net/t/sleeves-locally/193649/20 "2007-11-19T19:58:49Z")
> [@3rd '07 Track Day?](https://forums.speedlife.net/t/3rd-07-track-day/33416/46): > > Worthless without elaboration. They do not sponsor Pittspeed I don’t want to get in trouble. [Next page](https://forums.speedlife.net/t/sleeves-locally/193649.md?page=2)