# Sloppy Seconds **URL:** \ **Category:** Builds\ **Created:** [January 3, 2013, 7:16pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997 "2013-01-03T19:16:28Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [January 3, 2013, 7:16pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/1 "2013-01-03T19:16:28Z")
Finally back in a DSM after over 2 years and getting to go about it the way I’ve wanted. I owned this car a few years ago and always wanted it back and finally the time came. Fortunately, this time around I have a reliable DD and in no rush to finish it. Overall plans are to get it running by the end of May, I’d be happy with 120+ traps. Parts I have: HX-35 (T3) Ebay manifold Tial 44 Vband exhaust RC1000’s 255 pump Magnus SMIM Short route IC AngryAero Shutter covers NT TB Turbo will be getting rebuilt as well as the TB and of course tons of powder and ceramic coating to make this thing clean as hell which will be most of my initial work since there is too much damned snow to work on it. Once it melts, subframes are getting dropped to clean up the underbody, replace some stuff and coat what I can. Parts I need yet that I would like to trade coating for straight up or minimal cash involved for now: Fuelab -6an filter (purple) Pressure Gauge (any functional) OEM head to mani exh gasket Tial 50mm bov (purple) Hallman Pro MBC (purple) AEM 4 or 5 bar gauge and sensor AEM UEGO Calan catch can Aluminum coolant resevoir DSM V3 FP2’s or comparable (no regrinds) Still looking for a 2g awd trans, 6 bolt longblock, 5spd rear diff and axles (prefer non lsd) ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/428883_675475031184_1314911786_n.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/428883_675475031184_1314911786_n.jpg) ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/77088_675595844074_84027564_n.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/77088_675595844074_84027564_n.jpg) Shortly after getting it home, it gets buried! ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/184486_367960903300238_1642819641_n_zps35de7bb6.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/184486_367960903300238_1642819641_n_zps35de7bb6.jpg) AngryAero Shutter covers (Contact Boostin Performance to purchase) ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/184476_368369233259405_123316219_n_zps83bce7d5.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/184476_368369233259405_123316219_n_zps83bce7d5.jpg) ---
**Author:** ![Carbonfiberhooded](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carbonfiberhooded/32/7608_2.png) [@Carbonfiberhooded](https://forums.speedlife.net/u/Carbonfiberhooded)\ **Post date:** [January 3, 2013, 9:37pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/2 "2013-01-03T21:37:58Z")
Ha! Second time you’ve had Orzech’s sloppy seconds! You dirty whore! ---
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [January 4, 2013, 4:49am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/3 "2013-01-04T04:49:15Z")
> [@Carbonfiberhooded](#): > > Ha! Second time you’ve had Orzech’s sloppy seconds! You dirty whore! Actually 3rd lol. I had the white 1g from him as well as having this one twice Sent from my DROID Pro using Tapatalk 2 ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [January 4, 2013, 9:18am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/4 "2013-01-04T09:18:25Z")
I expect this to have many powder coated parts on it :tup: ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [January 4, 2013, 9:27am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/5 "2013-01-04T09:27:08Z")
what’s a shutter cover? ---
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [January 4, 2013, 10:36am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/6 "2013-01-04T10:36:36Z")
> [@Onyx Z32](#): > > I expect this to have many powder coated parts on it :tup: Oh for sure! It’ll be super clean 🙂 > [@theblue](#): > > what’s a shutter cover? It is the carbon fiber pieces that mount over the fog light holes to deflect air over the hood and under the car. Aerodynamic thing though for me it’ll mostly be a blingy piece since I wont be putting fog lights in. Most intercoolers get in the way of fog lights on dsm’s so this is another option instead of leaving it open. Sent from my DROID Pro using Tapatalk 2 ---
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [January 20, 2013, 2:30pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/7 "2013-01-20T14:30:01Z")
AngryAero bumper shutters installed. Super easy install! Again, contact Boostin Performance if you would like a set, they are available for 1g’s as well now! ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/64521_375608575868804_1965988501_n.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/64521_375608575868804_1965988501_n.jpg) Some more parts in 🙂 ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/19502_378325028930492_112722478_n.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/19502_378325028930492_112722478_n.jpg) ---
**Author:** ![Baker](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/baker/32/5423_2.png) [@Baker](https://forums.speedlife.net/u/Baker)\ **Post date:** [January 20, 2013, 2:42pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/8 "2013-01-20T14:42:43Z")
Can’t wait to see the progress :tup: ---
**Author:** ![Cornercarver82](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cornercarver82/32/6241_2.png) [@Cornercarver82](https://forums.speedlife.net/u/Cornercarver82)\ **Post date:** [January 21, 2013, 8:17am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/9 "2013-01-21T08:17:16Z")
Seen one almost identical to yours at an STM dyno day this past summer, layed down just shy of 900whp. So I have to ask why go with a stock trans? Why not a Shep or soemthing similar? ---
**Author:** ![Carbonfiberhooded](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carbonfiberhooded/32/7608_2.png) [@Carbonfiberhooded](https://forums.speedlife.net/u/Carbonfiberhooded)\ **Post date:** [January 21, 2013, 8:24pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/10 "2013-01-21T20:24:08Z")
A 900awhp DSM at STM?? You sure about that? I haven’t heard of any local DSMs at that power level. 500-600 yeah but nothing that high. That would be more HP then what Ricer or the RS put down. Maybe I’m just out of the loop. ---
**Author:** ![Cornercarver82](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cornercarver82/32/6241_2.png) [@Cornercarver82](https://forums.speedlife.net/u/Cornercarver82)\ **Post date:** [January 21, 2013, 8:46pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/11 "2013-01-21T20:46:10Z")
I dont think she was a local car, was off loaded from a trailer and with good reason, wasnt much street car left lol. Detective what are your power goals? ---
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [January 22, 2013, 7:13am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/12 "2013-01-22T07:13:44Z")
Lol this is full street car. Definitely did not make 900, it went 10.98 on stock trans, short block, hx35. I’m going the same route basically. Its full interior, no cage, none of that crap. I’ll be happy with 120+mph for this year. Sent from my DROID Pro using Tapatalk 2 ---
**Author:** ![Cornercarver82](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cornercarver82/32/6241_2.png) [@Cornercarver82](https://forums.speedlife.net/u/Cornercarver82)\ **Post date:** [January 22, 2013, 3:47pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/13 "2013-01-22T15:47:51Z")
Good plan ---
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [January 28, 2013, 8:46pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/14 "2013-01-28T20:46:48Z")
On their way: Alum rad ARP L19’s OEM Composite HG Got a few mount brackets, oil filter housing and tstat as well. Powdercoated the catch can and coolant resevoir: ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/IMG955792_wm.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/IMG955792_wm.jpg) ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/IMG959453_wm.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/IMG959453_wm.jpg) Just ordered a Carbon Creations front lip: ![http://i1224.photobucket.com/albums/ee370/DetectiveCoating/262E8650-F1AE-4796-A1D7-B2954F0587D8-5047-00000255EBA96ABD.jpg](http://i1224.photobucket.com/albums/ee370/DetectiveCoating/262E8650-F1AE-4796-A1D7-B2954F0587D8-5047-00000255EBA96ABD.jpg) ---
**Author:** ![Carbonfiberhooded](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carbonfiberhooded/32/7608_2.png) [@Carbonfiberhooded](https://forums.speedlife.net/u/Carbonfiberhooded)\ **Post date:** [January 30, 2013, 1:48pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/15 "2013-01-30T13:48:44Z")
Why do you want a non LSD rear end?? What’s in it now? ---
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [January 30, 2013, 2:31pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/16 "2013-01-30T14:31:40Z")
> [@Carbonfiberhooded](#): > > Why do you want a non LSD rear end?? What’s in it now? Auto rear diff is in it now. Chris gave me a differential so I’m going to swap this one into the diff housing. Id like lsd but finding axles for them is retarded hard and when you do, they’re super pricey. If I have one break, I would rather it be easy to find a replacement. Sent from my DROID Pro using Tapatalk 2 ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [January 30, 2013, 2:51pm UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/17 "2013-01-30T14:51:37Z")
Slooooow But really… Good luck with it :tup: ---
**Author:** ![Detective\_Coating](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/detective_coating/32/5319_2.png) [@Detective\_Coating](https://forums.speedlife.net/u/Detective_Coating)\ **Post date:** [January 31, 2013, 2:31am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/18 "2013-01-31T02:31:57Z")
Haha, I swear i’ll get it done this time around. Thanks bud! Sent from my DROID Pro using Tapatalk 2 ---
**Author:** ![Carbonfiberhooded](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carbonfiberhooded/32/7608_2.png) [@Carbonfiberhooded](https://forums.speedlife.net/u/Carbonfiberhooded)\ **Post date:** [January 31, 2013, 8:50am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/19 "2013-01-31T08:50:49Z")
Oh yeah I know alllll about trying to find those axles. They are pretty sturdy though. They don’t break too often. ---
**Author:** ![Cornercarver82](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cornercarver82/32/6241_2.png) [@Cornercarver82](https://forums.speedlife.net/u/Cornercarver82)\ **Post date:** [February 1, 2013, 5:06am UTC](https://forums.speedlife.net/t/sloppy-seconds/227997/20 "2013-02-01T05:06:33Z")
Gonna look good with that lip [Next page](https://forums.speedlife.net/t/sloppy-seconds/227997.md?page=2)