# Smoooooooooooooookin
**URL:** https://forums.speedlife.net/t/smoooooooooooooookin/249007
**Category:** Shift518 Off Topic
**Created:** [December 11, 2009, 5:27pm UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007 "2009-12-11T17:27:07Z")
**Posts on this page:** 20
**Page:** 4
### Author:  [@plaf713](https://forums.speedlife.net/u/plaf713)
#### Post date: [December 12, 2009, 6:09am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/61 "2009-12-12T06:09:01Z")
> [@PaintBall Tournament - April 29](https://forums.speedlife.net/t/paintball-tournament-april-29/27106/10):
>
> my car pulled a 1.7- and a 1.6 maybe i cant remeber now …lvd is fine if the car is right
exactly, most people do not know how to properly set the ride up to run at a drag strip, nor do they want to.
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [December 12, 2009, 6:10am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/62 "2009-12-12T06:10:18Z")
all my car has is a bolt on susp with 6 cyl rear springs in it so it squats and goes
---
### Author:  [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)
#### Post date: [December 12, 2009, 6:40am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/63 "2009-12-12T06:40:35Z")
> [@Can this Rim be fixed?? \*\*PICS\*\*](https://forums.speedlife.net/t/can-this-rim-be-fixed-pics/27161/3):
>
> i cut a 1.61 or a 1.58 at lvd, dont remember which one. Most of the time im up there i hook well. You have to remember. Most of everyones cars with the exception of few are not setup to cut good 60’. Handling suspension and a lowered ride are the complete opposite of what you need to run well at the drag strip, and that is what most people do to there cars. I wouldnt blame lvd on it, blame it on your setups.
>
> Look at drews, his car is lowered, on street tires with a 400rwhp car, does anyone here think hes going to rocket out of the whole.
>
> Last time i checked shawnvrfail ran an 11.7 at 127, thats a high 10 second pass.
apparently half this site thinks Im supposed to be a rocket out of the hole!
when I was building my car I had NO intentions to make it a dig racer…just not my thin. If I was going to make it a dig car, I would have went with different suspension (not handling suspension like I did) and would have went with a medium sized cam that made just as much power down low as up top…
I LOVE doing slow rolls…its just my thing…
just like you and Adam love digs.
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [December 12, 2009, 7:56am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/64 "2009-12-12T07:56:23Z")
drew your car is the way YOU want it and thats fine its your car .the susp u have on there will do a great job but i suggest ya get sub frame connectors they will help a lot in all aspects . keep doin what your doin its your car set it how u want it "it will just help me beat ya from a dig " lolololol
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [December 12, 2009, 8:13am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/65 "2009-12-12T08:13:37Z")
Why would you need skinnies to run drag RADIALS???
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [December 12, 2009, 8:19am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/66 "2009-12-12T08:19:21Z")
bias ply and radials = bad move
---
### Author:  [@LKSi](https://forums.speedlife.net/u/LKSi)
#### Post date: [December 12, 2009, 8:30am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/67 "2009-12-12T08:30:28Z")
[](http://img3.imageshack.us/i/dsmc.jpg/)
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [December 12, 2009, 8:43am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/68 "2009-12-12T08:43:23Z")
OMG IS THAT SHAWN?! :rofl :rofl :rofl
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [December 12, 2009, 8:44am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/69 "2009-12-12T08:44:50Z")
> [@Any stereo advantage connections?](https://forums.speedlife.net/t/any-stereo-advantage-connections/26913/11):
>
> bias ply and radials = bad move
yeah but that applies exclusively to running slicks in the rear with radials on the front…rear starts stepping out, you correct, front tires response is crazy, rear not so much=you in wall.
not really seeing why if he’s running drag radials he needs bias ply skinnies up front…
---
### Author:  [@Auto0utcast1](https://forums.speedlife.net/u/Auto0utcast1)
#### Post date: [December 12, 2009, 9:06am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/70 "2009-12-12T09:06:29Z")
> [@On another topic](https://forums.speedlife.net/t/27129/12):
>
> yeah but that applies exclusively to running slicks in the rear with radials on the front…rear starts stepping out, you correct, front tires response is crazy, rear not so much=you in wall.
>
> not really seeing why if he’s running drag radials he needs bias ply skinnies up front…
the radials are bias ply’s… not the skinny’s
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [December 12, 2009, 9:19am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/71 "2009-12-12T09:19:32Z")
> [@Your Car needed for UB club expo!](https://forums.speedlife.net/t/your-car-needed-for-ub-club-expo/27107/47):
>
> the radials are bias ply’s… not the skinny’s
:rofl :rofl :rofl
Really?
Really?
---
### Author:  [@Auto0utcast1](https://forums.speedlife.net/u/Auto0utcast1)
#### Post date: [December 12, 2009, 9:40am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/72 "2009-12-12T09:40:39Z")
> [@Check this out](https://forums.speedlife.net/t/check-this-out/27156/9):
>
> :rofl :rofl :rofl
>
> Really?
>
> Really?
twas a joke.
k, no… im retarded.:retardclap:banghead
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [December 12, 2009, 10:15am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/73 "2009-12-12T10:15:31Z")
:rofl 'sall good
---
### Author:  [@imported\_hybrdthry91](https://forums.speedlife.net/u/imported_hybrdthry91)
#### Post date: [December 12, 2009, 11:16am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/74 "2009-12-12T11:16:46Z")
> [@4/5 Sabres game?](https://forums.speedlife.net/t/4-5-sabres-game/27137/6):
>
> _slurp_
>
> AWD is meaningless when you are making 600+ AWHP on street tires champ. The car outlaunched 99% of anything on the street. It just spun at LVD.
>
> When I raced Ray, I hit rev limiter well past the 60’. Vids don’t lie. 🙂
>
> But, the car went 11.7 with a 1.72 60’ a few times when it made much less power.
so you had a high eleven second car that could have easily gone low 11s if not high 10s even on the street tires. maybe with some driving you might not have spun so much, you know a pedal isnt an on/off switch right?
regardless of the excuses you make, don’t you find it ironic how bad your driving was chump and here you are talking shit about drew driving his car?
---
### Author:  [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)
#### Post date: [December 12, 2009, 11:21am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/75 "2009-12-12T11:21:03Z")
> [@STUFFED UP NOSE!!!!!!](https://forums.speedlife.net/t/stuffed-up-nose/27157/29):
>
> so you had a high eleven second car that could have easily gone low 11s if not high 10s even on the street tires. maybe with some driving you might not have spun so much, you know a pedal isnt an on/off switch right?
>
> regardless of the excuses you make, don’t you find it ironic how bad your driving was chump and here you are talking shit about drew driving his car?
thanks alot dude…
---
### Author:  [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)
#### Post date: [December 12, 2009, 11:23am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/76 "2009-12-12T11:23:22Z")
> [@On another topic](https://forums.speedlife.net/t/27129/12):
>
> yeah but that applies exclusively to running slicks in the rear with radials on the front…rear starts stepping out, you correct, front tires response is crazy, rear not so much=you in wall.
>
> not really seeing why if he’s running drag radials he needs bias ply skinnies up front…
My tires are MT ET STREETS…even tho they are DOT approved, they are hardly road legal…they are more like a slick…
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [December 12, 2009, 11:33am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/77 "2009-12-12T11:33:49Z")
lol oh
---
### Author:  [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)
#### Post date: [December 12, 2009, 11:38am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/78 "2009-12-12T11:38:30Z")
> [@FS: 1990 BMW 325is](https://forums.speedlife.net/t/fs-1990-bmw-325is/24960/35):
>
> lol oh
thats all you got??
your were throwing up this big argument about how I dont need shinnies…
your perspective change a little??
---
### Author:  [@kinglouis\_XIV](https://forums.speedlife.net/u/kinglouis_XIV)
#### Post date: [December 12, 2009, 11:42am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/79 "2009-12-12T11:42:56Z")
dint change my ssmokinss
---
### Author:  [@psi2high](https://forums.speedlife.net/u/psi2high)
#### Post date: [December 12, 2009, 11:44am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/80 "2009-12-12T11:44:03Z")
No stoner boy wonder knows nothing about those tires and the proper set up
[Previous page](https://forums.speedlife.net/t/smoooooooooooooookin/249007.md?page=3)
[Next page](https://forums.speedlife.net/t/smoooooooooooooookin/249007.md?page=5)