# Smoooooooooooooookin **URL:** https://forums.speedlife.net/t/smoooooooooooooookin/249007 **Category:** Shift518 Off Topic **Created:** [December 11, 2009, 5:27pm UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007 "2009-12-11T17:27:07Z") **Posts on this page:** 1 **Showing post:** 63
### Author: ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS) #### Post date: [December 12, 2009, 6:40am UTC](https://forums.speedlife.net/t/smoooooooooooooookin/249007/63 "2009-12-12T06:40:35Z")
> [@Can this Rim be fixed?? \*\*PICS\*\*](https://forums.speedlife.net/t/can-this-rim-be-fixed-pics/27161/3): > > i cut a 1.61 or a 1.58 at lvd, dont remember which one. Most of the time im up there i hook well. You have to remember. Most of everyones cars with the exception of few are not setup to cut good 60’. Handling suspension and a lowered ride are the complete opposite of what you need to run well at the drag strip, and that is what most people do to there cars. I wouldnt blame lvd on it, blame it on your setups. > > Look at drews, his car is lowered, on street tires with a 400rwhp car, does anyone here think hes going to rocket out of the whole. > > Last time i checked shawnvrfail ran an 11.7 at 127, thats a high 10 second pass. apparently half this site thinks Im supposed to be a rocket out of the hole! when I was building my car I had NO intentions to make it a dig racer…just not my thin. If I was going to make it a dig car, I would have went with different suspension (not handling suspension like I did) and would have went with a medium sized cam that made just as much power down low as up top… I LOVE doing slow rolls…its just my thing… just like you and Adam love digs. --- _[View the full topic](https://forums.speedlife.net/t/smoooooooooooooookin/249007)._