# snapped wheel stud

**URL:** <https://forums.speedlife.net/t/snapped-wheel-stud/100297>\
**Category:** SON240sx Automotive\
**Created:** [September 27, 2006, 5:00pm UTC](https://forums.speedlife.net/t/snapped-wheel-stud/100297 "2006-09-27T17:00:47Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\
**Post date:** [September 27, 2006, 9:21pm UTC](https://forums.speedlife.net/t/snapped-wheel-stud/100297/21 "2006-09-27T21:21:39Z")

</div>

matty…

take a hammer and you can crack a stud out in one or two taps…

however, putting them on with an impact wrench is not a fantastic idea… it will work, maybe, but you dont want to risk the stud spinning on its knurl in the hub… if it does you would have to get a whole new hub… i have had this happen however it was with H&R studs that were not the correct knurl

the proper way to put a stud in is to remove the hub and have the stud pressed in on an arbor press.

or you can just have one of my old rear hubs.

---

<div class="post-metadata">

**Author:** ![smurf6x6](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@smurf6x6](https://forums.speedlife.net/u/smurf6x6)\
**Post date:** [September 27, 2006, 10:01pm UTC](https://forums.speedlife.net/t/snapped-wheel-stud/100297/22 "2006-09-27T22:01:01Z")

</div>

Hit it out with a hammer takes to sec. Then use a nut to pull it in, if you don’t want to remove the hub cause it really not worth the time to remove it. Don’t use a impact gun to pull the stud in.

[Previous page](https://forums.speedlife.net/t/snapped-wheel-stud/100297.md?page=1)