# so i finally changed my tans mount.. **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [September 23, 2006, 11:41pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160 "2006-09-23T23:41:12Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![HaNnIBaL64](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hannibal64/32/5954_2.png) [@HaNnIBaL64](https://forums.speedlife.net/u/HaNnIBaL64)\ **Post date:** [September 23, 2006, 11:41pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/1 "2006-09-23T23:41:12Z")
but, now i have a metallic rubbing sound coming from the tranny… it goes away when i push in the clutch though. Any ideas? ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [September 23, 2006, 11:42pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/2 "2006-09-23T23:42:22Z")
throw out bearing ---
**Author:** ![HaNnIBaL64](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hannibal64/32/5954_2.png) [@HaNnIBaL64](https://forums.speedlife.net/u/HaNnIBaL64)\ **Post date:** [September 23, 2006, 11:45pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/3 "2006-09-23T23:45:42Z")
> [@tonight's snow storm](https://forums.speedlife.net/t/tonights-snow-storm/24479/117): > > throw out bearing pain in the ass to change or no? ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [September 23, 2006, 11:48pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/4 "2006-09-23T23:48:20Z")
basically changing clutch ---
**Author:** ![HaNnIBaL64](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hannibal64/32/5954_2.png) [@HaNnIBaL64](https://forums.speedlife.net/u/HaNnIBaL64)\ **Post date:** [September 23, 2006, 11:51pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/5 "2006-09-23T23:51:13Z")
never done it… i can see some busted up knuckles next weekend ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [September 24, 2006, 6:26am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/6 "2006-09-24T06:26:01Z")
> [@tonight's snow storm](https://forums.speedlife.net/t/tonights-snow-storm/24479/117): > > throw out bearing ---
**Author:** ![HaNnIBaL64](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hannibal64/32/5954_2.png) [@HaNnIBaL64](https://forums.speedlife.net/u/HaNnIBaL64)\ **Post date:** [September 24, 2006, 9:09am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/7 "2006-09-24T09:09:25Z")
[QUOTE=pewterss;457341][/QUOTE] you think you m ight have time next saturday to look at it? ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [September 24, 2006, 10:08am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/8 "2006-09-24T10:08:24Z")
who? ---
**Author:** ![HaNnIBaL64](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hannibal64/32/5954_2.png) [@HaNnIBaL64](https://forums.speedlife.net/u/HaNnIBaL64)\ **Post date:** [September 24, 2006, 7:24pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/9 "2006-09-24T19:24:51Z")
> [@Ebay auction of the day.](https://forums.speedlife.net/t/ebay-auction-of-the-day/24506/18): > > who? you ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [September 25, 2006, 4:33am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/10 "2006-09-25T04:33:48Z")
yes,but jeff’s closer to u! ---
**Author:** ![HaNnIBaL64](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hannibal64/32/5954_2.png) [@HaNnIBaL64](https://forums.speedlife.net/u/HaNnIBaL64)\ **Post date:** [September 25, 2006, 6:58pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/11 "2006-09-25T18:58:04Z")
ok well either of you… i could really care less i hear great things abotu you both… just been awhile since ive been down. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [September 26, 2006, 4:48am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/12 "2006-09-26T04:48:50Z")
would be nice to see u,but spangs making some hot honey marrie him the week end,so u better be early! ---
**Author:** ![scoob8000](https://avatars.discourse-cdn.com/v4/letter/s/e8c25b/32.png) [@scoob8000](https://forums.speedlife.net/u/scoob8000)\ **Post date:** [September 26, 2006, 5:59am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/13 "2006-09-26T05:59:52Z")
Input shaft bearing… If it was the throwout bearing the noise would be the opposite. (Noise with clutch pressed in) Check your fluid level? Low fluid will eat up bearings pretty quick… ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [September 26, 2006, 6:30am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/14 "2006-09-26T06:30:49Z")
not always^ ---
**Author:** ![scoob8000](https://avatars.discourse-cdn.com/v4/letter/s/e8c25b/32.png) [@scoob8000](https://forums.speedlife.net/u/scoob8000)\ **Post date:** [September 26, 2006, 8:20am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/15 "2006-09-26T08:20:11Z")
> [@Sorry: another Need a Job Thread](https://forums.speedlife.net/t/sorry-another-need-a-job-thread/24564/12): > > not always^ Care to ellaborate? I’m by no means a transmission expert. I just had the pleasure of an input shaft bearing going out in my truck. Learned from what the mechanic at the trans shop told me… ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [September 26, 2006, 8:47am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/16 "2006-09-26T08:47:02Z")
> [@Compaq Presario Memory and such](https://forums.speedlife.net/t/compaq-presario-memory-and-such/24436/5): > > Care to ellaborate? > > I’m by no means a transmission expert. I just had the pleasure of an input shaft bearing going out in my truck. Learned from what the mechanic at the trans shop told me… im not saying ur wrong,the bearing i see it happin both ways!! ---
**Author:** ![beat90tsi](https://avatars.discourse-cdn.com/v4/letter/b/43a26b/32.png) [@beat90tsi](https://forums.speedlife.net/u/beat90tsi)\ **Post date:** [September 26, 2006, 9:27am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/17 "2006-09-26T09:27:30Z")
The NV trannies in Jeeps seem to all make that noise, and it goes away when you push the clutch in. Is it loud as balls if you shut it off, but quiet if you shut it off with the clutch pedal depressed? ---
**Author:** ![scoob8000](https://avatars.discourse-cdn.com/v4/letter/s/e8c25b/32.png) [@scoob8000](https://forums.speedlife.net/u/scoob8000)\ **Post date:** [September 26, 2006, 10:22am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/18 "2006-09-26T10:22:01Z")
> [@Post some job sites please.](https://forums.speedlife.net/t/post-some-job-sites-please/24565/6): > > im not saying ur wrong,the bearing i see it happin both ways!! Gotcha, I was just wondering… Ya know, future refrence kinda thing… ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [September 26, 2006, 10:25am UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/19 "2006-09-26T10:25:35Z")
> [@Sorry: another Need a Job Thread](https://forums.speedlife.net/t/sorry-another-need-a-job-thread/24564/8): > > Input shaft bearing… > > If it was the throwout bearing the noise would be the opposite. (Noise with clutch pressed in) > > Check your fluid level? Low fluid will eat up bearings pretty quick… stangs use cable clutch not hydro. and must stangs sound like birds chriping when throwout bearing is going or gone ---
**Author:** ![scoob8000](https://avatars.discourse-cdn.com/v4/letter/s/e8c25b/32.png) [@scoob8000](https://forums.speedlife.net/u/scoob8000)\ **Post date:** [September 26, 2006, 1:48pm UTC](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160/20 "2006-09-26T13:48:32Z")
> [@AWD or RWD?](https://forums.speedlife.net/t/awd-or-rwd/24501/84): > > stangs use cable clutch not hydro. and must stangs sound like birds chriping when throwout bearing is going or gone I didn’t specify, my bad… I meant the gear oil… Didn’t know about them not having a hydro clutch tho… Good info… [Next page](https://forums.speedlife.net/t/so-i-finally-changed-my-tans-mount/185160.md?page=2)