# Sobo's Mitsubishi Evolution 8. Long term keeper :)

**URL:** <https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055>\
**Category:** Builds\
**Created:** [August 13, 2010, 1:23pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055 "2010-08-13T13:23:29Z")\
**Posts on this page:** 20\
**Page:** 5

<div class="post-metadata">

**Author:** ![nytalonTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nytalontsi/32/5399_2.png) [@nytalonTSi](https://forums.speedlife.net/u/nytalonTSi)\
**Post date:** [September 10, 2010, 2:06pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/81 "2010-09-10T14:06:50Z")

</div>

I like ebc for the fact it reacts to temperature changes and that it sure does give you more safety for your engine as it will do everything it can to compensate and stop it from over boosting and allows you to program how the boost comes on with profiles, etc…

But I think an mbc is more reliable, if you want different tunes you run the Buschur dual stage manual.

It’s all about preference.

---

<div class="post-metadata">

**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\
**Post date:** [September 10, 2010, 5:50pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/82 "2010-09-10T17:50:54Z")

</div>

> [@sobo](#):
>
> I dislike the idea of running in and out of my car and turning a knob to change my boost. I understand it’s simple.

But you have to get your laptop out, hook up the Tactrix cable, make the adjustment to the map, burn it to the ROM, unhook everything, and then test is out. That is a lot more work than turning a knob 🙂

Plus, with a MBC, it’s mechanical, just a ball and spring, so there isn’t much to fail (very low failure rate on good MBC), where the EBC can have solenoid failure from moving parts, failed electrical connections, and mistakes in the ROM etc…

Both are pretty reliable, but there is definitely more to go wrong with the EBC.

Again, you don’t really make adjustments too often with an AWD car. I run 32 psi or so, and I never adjust it. There is just no need, I would never want to be slower, and I only run one type of fuel, so I would never adjust maps and stuff. It has it’s place, but I definitely see it more for a FWD car than an AWD car.

People on evom do like it though.

–mark

---

<div class="post-metadata">

**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\
**Post date:** [September 10, 2010, 6:08pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/83 "2010-09-10T18:08:37Z")

</div>

Well since this isn’t my dedicated drag car I’m setting it up to be switched between 93 and e85 on the fly. A dual stage boost controller could work, but it’s much more convenient for me to be able to have my ecu take care of the hard work. I’m willing to deal with the potential failure since I’m setting it up I think I’ll have a decent idea on what to fix.

I shouldn’t have to mess with my laptop once when everything is set up to my liking.

I’ll cross the bridge when the time comes, I still have a ton of other things to take care of before I get there. Either way I’m ordering a JDM map sensor to better take care of my logging needs. Switcing to BBECU or MBC should be a minor detail at the end of that.

---

<div class="post-metadata">

**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\
**Post date:** [September 10, 2010, 6:36pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/84 "2010-09-10T18:36:23Z")

</div>

so its too much work to turn a knob… but you also are going to have to empty your gas tank completely everytime, then put e85 in when u want it, and visversa  
and yes u have to go into the ecu and edit everything. it’s a lot more work than turning a knob. however i suppose popping your hood and stepping out of your car is a pretty hefty workload

---

<div class="post-metadata">

**Author:** ![nytalonTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nytalontsi/32/5399_2.png) [@nytalonTSi](https://forums.speedlife.net/u/nytalonTSi)\
**Post date:** [September 10, 2010, 7:05pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/85 "2010-09-10T19:05:04Z")

</div>

Don’t wanna pop the hood, in cabin mbc.

Everyone has their preference deebo, it’s all good.

---

<div class="post-metadata">

**Author:** ![Sansone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sansone/32/4970_2.png) [@Sansone](https://forums.speedlife.net/u/Sansone)\
**Post date:** [September 11, 2010, 10:54am UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/86 "2010-09-11T10:54:46Z")

</div>

Red!

---

<div class="post-metadata">

**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\
**Post date:** [September 11, 2010, 7:44pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/87 "2010-09-11T19:44:18Z")

</div>

> [@deebo](#):
>
> so its too much work to turn a knob… but you also are going to have to empty your gas tank completely everytime, then put e85 in when u want it, and visversa  
> and yes u have to go into the ecu and edit everything. it’s a lot more work than turning a knob. however i suppose popping your hood and stepping out of your car is a pretty hefty workload

It’s not that much work to drive on the gas light and fill up with a different fuel. Thats NOT hard work. I HAVE to put the JDM map or something similar to get my computer to log the way I WANT IT. It’s a super minor step to re-hook the solenoid back up and take out some restricter pills.

Copy and pasting XML’s into the rom is a piece of cake too.

Don’t get all offended because I want my car set up properly to my likings instead of it being hacked. It’s my DD therefore I want things to be as convenient as possible. Push button seems pretty damn convenient.

---

<div class="post-metadata">

**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\
**Post date:** [September 11, 2010, 8:47pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/88 "2010-09-11T20:47:38Z")

</div>

ebc is always nice, best part of it is the ability to ramp boost up quicker or slower etc

nice car btw

---

<div class="post-metadata">

**Author:** ![Jim1234664](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jim1234664/32/7438_2.png) [@Jim1234664](https://forums.speedlife.net/u/Jim1234664)\
**Post date:** [September 13, 2010, 12:09pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/89 "2010-09-13T12:09:28Z")

</div>

car is looking good

---

<div class="post-metadata">

**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\
**Post date:** [September 14, 2010, 1:34pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/90 "2010-09-14T13:34:48Z")

</div>

Had a pretty frustrating day today.

First off my ECU pins did not come in. It’s been almost a week and my tracking information says delivered so I said fuck it and went to town. I ended up just splicing wires together with connectors, which works, but isn’t what I wanted to do.

Then I get my rom all flashed over and ready to rock and roll with a modified mut table. No problem there surprizingly.

But then I go to edit my XML files in Evoscan. Unfortunately I have version 2.7 which is 100% bullshit and has a ton of things changed. Not only that, but my serial code does NOT work on the older versions. So now I’m shit out of luck for today and all I have been waiting to do is start logging.

I hope the rest of this tuning adventure isn’t so crappy.

Oh yeah, and to top it off I spun my MBC a little while taking my negative terminal off. Gonna have a ton of fun going wot and putting that back where it belongs…

---

<div class="post-metadata">

**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\
**Post date:** [September 15, 2010, 7:56am UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/91 "2010-09-15T07:56:50Z")

</div>

How much did it turn? It shouldn’t be too hard to adjust a MBC unless it turned like 10 turns in random order 🙂

And what ECU pins do you need? I have a bunch of ECU pins for an SRT4, which I am 90% sure are universal, so if you could use them, you are more than welcome to come up and get them.

–mark

---

<div class="post-metadata">

**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\
**Post date:** [September 15, 2010, 2:25pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/92 "2010-09-15T14:25:02Z")

</div>

Got my wideband re-wired into my ecu today. I ended up just going and redoing everything because I felt like I hacked some stuff.

Here are some random pictures of stuff I did.

 ![http://i965.photobucket.com/albums/ae134/alexsobo91/IMAG0269.jpg](http://i965.photobucket.com/albums/ae134/alexsobo91/IMAG0269.jpg)  
ECU pins

 ![http://i965.photobucket.com/albums/ae134/alexsobo91/IMAG0264.jpg](http://i965.photobucket.com/albums/ae134/alexsobo91/IMAG0264.jpg)  
Analog wire + misc ground wire

 ![http://i965.photobucket.com/albums/ae134/alexsobo91/IMAG0265.jpg](http://i965.photobucket.com/albums/ae134/alexsobo91/IMAG0265.jpg)  
 ![http://i965.photobucket.com/albums/ae134/alexsobo91/IMAG0268.jpg](http://i965.photobucket.com/albums/ae134/alexsobo91/IMAG0268.jpg)

Now I’m waiting on my cars coolant temp to drop so I can log my warm up and idle on my new basemap.

---

<div class="post-metadata">

**Author:** ![nytalonTSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nytalontsi/32/5399_2.png) [@nytalonTSi](https://forums.speedlife.net/u/nytalonTSi)\
**Post date:** [September 15, 2010, 4:43pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/93 "2010-09-15T16:43:20Z")

</div>

Nice.

---

<div class="post-metadata">

**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\
**Post date:** [September 17, 2010, 2:41pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/94 "2010-09-17T14:41:40Z")

</div>

Ordered a 4bar omni map sensor and a grimspeed 3 port solenoid today.

Regardless of what you fggts think about boost controlled by ecu, at least this will get the ball rolling on my upcoming speed density tune.

I’m also thinking about ditching E85 for 100 octane so I don’t need to go through a whole injector scaling process again . It’s pretty tedious but as for an update on that I have my low and middle fuel trims set perfectly. WOT soon!

For those of you who like pictures:

 ![http://i965.photobucket.com/albums/ae134/alexsobo91/lotsoflogs.jpg](http://i965.photobucket.com/albums/ae134/alexsobo91/lotsoflogs.jpg)  
This shows the process of working through street tuning with extensive logging. I had about 6 logs dedicated to 6 different tunes getting the low fuel trim dialed in. The last 3 sets are 20 minute street driving logs and 10-15 minute highway cruising logs to work on the mid level fuel trims straightened out.

Cannot complain though, my tuner is doing an excellent job. The car has never idled or drove so nicely since I bought it, and it’s not even done yet. Can’t wait to see/feel the finished product.

Lastly, Kelford 272’s and GSC valve springs coming soon!

Woot.

---

<div class="post-metadata">

**Author:** ![Sansone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sansone/32/4970_2.png) [@Sansone](https://forums.speedlife.net/u/Sansone)\
**Post date:** [September 18, 2010, 4:30pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/95 "2010-09-18T16:30:43Z")

</div>

ugh fucking trims

---

<div class="post-metadata">

**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\
**Post date:** [September 19, 2010, 4:13pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/96 "2010-09-19T16:13:29Z")

</div>

You’ll love those cams, they one of the best out there. I had the 272’s on my red car and it drove perfect.

---

<div class="post-metadata">

**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\
**Post date:** [September 19, 2010, 4:29pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/97 "2010-09-19T16:29:44Z")

</div>

> [@neonglh](#):
>
> You’ll love those cams, they one of the best out there. I had the 272’s on my red car and it drove perfect.

Yeah I’m excited. Really, once I have these cams and finish polishing up the car… It’s just begging for more turbo.

---

<div class="post-metadata">

**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\
**Post date:** [September 19, 2010, 4:34pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/98 "2010-09-19T16:34:09Z")

</div>

Can’t wait for this to start ripping good. Go to the track ya sally.

---

<div class="post-metadata">

**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\
**Post date:** [September 19, 2010, 4:53pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/99 "2010-09-19T16:53:53Z")

</div>

> [@sobo](#):
>
> Yeah I’m excited. Really, once I have these cams and finish polishing up the car… It’s just begging for more turbo.

That turbo does just fine 😃

---

<div class="post-metadata">

**Author:** ![sobo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sobo/32/5267_2.png) [@sobo](https://forums.speedlife.net/u/sobo)\
**Post date:** [September 19, 2010, 5:30pm UTC](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055/100 "2010-09-19T17:30:22Z")

</div>

> [@neonglh](#):
>
> That turbo does just fine 😃

It does.

But I have been falling victim to excellent advertising from CBRD race factory. I don’t see any down side to almost 400whp+ on 93 octane with almost stock spool characteristics!

Although, this is just fantasy for me right now. First things first, cam upgrade.

Then I’ll worry about the rest of that next season. I have the opportunity to snag a quartermaster twin disk for my car but I’m not sure exactly what I want to do with that.

[Previous page](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055.md?page=4)

[Next page](https://forums.speedlife.net/t/sobos-mitsubishi-evolution-8-long-term-keeper/159055.md?page=6)
