# SOLD: Craftsman 10" radial arm saw **URL:** \ **Category:** Classifieds\ **Created:** [October 22, 2008, 12:37pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897 "2008-10-22T12:37:07Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [October 22, 2008, 12:37pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/1 "2008-10-22T12:37:07Z")
Best offer will take it **NOTE:** there is a recall on this because of the blade gaurd not covering all of the blade. If some one buys this go to this site [http://www.radialarmsawrecall.com/](http://www.radialarmsawrecall.com/) and type in the model number, fill out your adress info and something will be sent to you for free to install a new one so you do not get hurt. I strongly urge the potential buyer not to use this until the new blade gaurd is installed. This image is not mine but its the same one ![http://i38.tinypic.com/6dsfnb.jpg](http://i38.tinypic.com/6dsfnb.jpg) ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [October 23, 2008, 10:36am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/2 "2008-10-23T10:36:24Z")
no one needs a saw ?! ---
**Author:** ![jimmyfloyd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jimmyfloyd/32/3077_2.png) [@jimmyfloyd](https://forums.speedlife.net/u/jimmyfloyd)\ **Post date:** [October 24, 2008, 8:21am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/3 "2008-10-24T08:21:18Z")
Thanks for the information on the guard kit. Just got one from my father and it’s part of it. ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [October 24, 2008, 2:18pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/4 "2008-10-24T14:18:19Z")
> [@jimmyfloyd](#): > > Thanks for the information on the guard kit. Just got one from my father and it’s part of it. np ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 14, 2008, 6:49pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/5 "2008-11-14T18:49:55Z")
best offer ---
**Author:** ![POOPRA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/poopra/32/7188_2.png) [@POOPRA](https://forums.speedlife.net/u/POOPRA)\ **Post date:** [November 14, 2008, 7:09pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/6 "2008-11-14T19:09:00Z")
hrm I dont really need one, where is it located? ---
**Author:** ![jimmyfloyd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jimmyfloyd/32/3077_2.png) [@jimmyfloyd](https://forums.speedlife.net/u/jimmyfloyd)\ **Post date:** [November 14, 2008, 7:13pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/7 "2008-11-14T19:13:38Z")
does yours have the stand too? And these are great saws. Used mine this weekend to rip a board lengthwise, and to cut several other pieces to length. No need for a table saw. ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 14, 2008, 7:17pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/8 "2008-11-14T19:17:44Z")
> [@jimmyfloyd](#): > > does yours have the stand too? > > And these are great saws. Used mine this weekend to rip a board lengthwise, and to cut several other pieces to length. No need for a table saw. by stand do you mean the wooden table if so yes. ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 14, 2008, 7:18pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/9 "2008-11-14T19:18:11Z")
> [@POOPRA](#): > > hrm I dont really need one, where is it located? wheatfield off the nf blvd ---
**Author:** ![turbociv](https://avatars.discourse-cdn.com/v4/letter/t/dfb087/32.png) [@turbociv](https://forums.speedlife.net/u/turbociv)\ **Post date:** [November 14, 2008, 7:53pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/10 "2008-11-14T19:53:55Z")
25bucs and ill take it. let me know. ---
**Author:** ![98SS10](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/98ss10/32/7288_2.png) [@98SS10](https://forums.speedlife.net/u/98SS10)\ **Post date:** [November 15, 2008, 7:31am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/11 "2008-11-15T07:31:31Z")
LOL, so the 1/4 inch of plastic that keeps u away from the blade is almost enuff protection for u to keep yer mitts away from the blade! wtF? I dont think any guard would be almost enuff to keep my didgets away from the spinning sharpness! ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 15, 2008, 10:09am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/12 "2008-11-15T10:09:19Z")
im going to keep the bidding going until sunday night ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 16, 2008, 9:36am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/13 "2008-11-16T09:36:34Z")
does any one raise turbos bid ---
**Author:** ![POOPRA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/poopra/32/7188_2.png) [@POOPRA](https://forums.speedlife.net/u/POOPRA)\ **Post date:** [November 16, 2008, 9:37am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/14 "2008-11-16T09:37:26Z")
ill bid 40, post up a pic of the actual saw… Is there anything wrong with it besides the blade cover? ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 16, 2008, 9:45am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/15 "2008-11-16T09:45:06Z")
> [@POOPRA](#): > > ill bid 40, post up a pic of the actual saw… Is there anything wrong with it besides the blade cover? ok np, it needs a key. i started it before I posted this thread. I have a craftsmans scroll saw… the key is almost identical and it will start with that one. Im in the process of finding the original key or buying a new one. I can even post a vid of it working the scroll saw key doesnt snap in all the way but it starts it. ill get the original key. ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 16, 2008, 9:58am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/16 "2008-11-16T09:58:11Z")
just got done taking a video of it in action will be up soon ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 16, 2008, 10:05am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/17 "2008-11-16T10:05:10Z")
![http://i36.tinypic.com/2igp11f.jpg](http://i36.tinypic.com/2igp11f.jpg) ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 16, 2008, 10:32am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/18 "2008-11-16T10:32:02Z")
videos take a long to host i guess probly another 10 minutes for video ---
**Author:** ![reval](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reval/32/5168_2.png) [@reval](https://forums.speedlife.net/u/reval)\ **Post date:** [November 16, 2008, 10:56am UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/19 "2008-11-16T10:56:31Z")
video [View My Video](http://tinypic.com/player.php?v=jfau6o&s=4) ---
**Author:** ![Loudgp](https://avatars.discourse-cdn.com/v4/letter/l/67e7ee/32.png) [@Loudgp](https://forums.speedlife.net/u/Loudgp)\ **Post date:** [November 16, 2008, 6:27pm UTC](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897/20 "2008-11-16T18:27:49Z")
75 and you deliver? [Loudz34@aol.com](mailto:Loudz34@aol.com) [Next page](https://forums.speedlife.net/t/sold-craftsman-10-radial-arm-saw/56897.md?page=2)