# some fab work ive been busy with lately. **URL:** \ **Category:** Vendor Marketplace\ **Created:** [December 4, 2012, 6:56pm UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579 "2012-12-04T18:56:04Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![brilliantyellowg60](https://avatars.discourse-cdn.com/v4/letter/b/6f9a4e/32.png) [@brilliantyellowg60](https://forums.speedlife.net/u/brilliantyellowg60)\ **Post date:** [December 5, 2012, 6:21am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/21 "2012-12-05T06:21:45Z")
Nice work! ---
**Author:** ![Haenszel](https://avatars.discourse-cdn.com/v4/letter/h/e68b1a/32.png) [@Haenszel](https://forums.speedlife.net/u/Haenszel)\ **Post date:** [December 5, 2012, 6:36am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/22 "2012-12-05T06:36:04Z")
> [@POOPRA](#): > > So are you grinding down each weld to be flush with the piping just for aesthetic purposes? Looks exteremelly time consuming since your so precise with it. Its that Dan’s 4000? I certainly don’t see any grinding… yes it’s dan’s 4000. Jay, see you later this winter. I got some plans that may require patience. ---
**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\ **Post date:** [December 5, 2012, 6:37am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/23 "2012-12-05T06:37:43Z")
> [@Haenszel](#): > > I got some plans that may require patience. LSX-T, do it and keep it awd. \<3 ---
**Author:** ![Haenszel](https://avatars.discourse-cdn.com/v4/letter/h/e68b1a/32.png) [@Haenszel](https://forums.speedlife.net/u/Haenszel)\ **Post date:** [December 5, 2012, 6:48am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/24 "2012-12-05T06:48:55Z")
> [@GV1390](#): > > LSX-T, do it and keep it awd. \<3 I almost pulled that trigger. Srs. ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [December 5, 2012, 7:04am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/25 "2012-12-05T07:04:06Z")
1. Welder shows promise & does great work 2. Welder attracts high demand for work 3. Welder takes on lots of projects 4. Welder is overloaded and deadlines are not met 5. Welder & customers become frustrated 6. Welder turns to alcohol, customers turn to next welder who shows promise Beware of the cycle 🙂 ---
**Author:** ![95dime](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/95dime/32/7514_2.png) [@95dime](https://forums.speedlife.net/u/95dime)\ **Post date:** [December 5, 2012, 7:07am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/26 "2012-12-05T07:07:32Z")
good shit :tup: ---
**Author:** ![ultradriver10000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ultradriver10000/32/7397_2.png) [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)\ **Post date:** [December 5, 2012, 7:07am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/27 "2012-12-05T07:07:44Z")
Looks very nice ---
**Author:** ![sasquatch](https://avatars.discourse-cdn.com/v4/letter/s/e79b87/32.png) [@sasquatch](https://forums.speedlife.net/u/sasquatch)\ **Post date:** [December 5, 2012, 7:20am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/28 "2012-12-05T07:20:18Z")
> [@Haenszel](#): > > I almost pulled that trigger. Srs. Man up! Awesome work. Dans 4000 is one of my favorite cars! ---
**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\ **Post date:** [December 5, 2012, 8:00am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/29 "2012-12-05T08:00:25Z")
Looks great :tup: ---
**Author:** ![POOPRA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/poopra/32/7188_2.png) [@POOPRA](https://forums.speedlife.net/u/POOPRA)\ **Post date:** [December 5, 2012, 8:35am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/30 "2012-12-05T08:35:13Z")
[QUOTE=Haenszel;3419204]I certainly don’t see any grinding… yes it’s dan’s 4000. [QUOTE] I see the beads now in the closeup pic, not used to seeing welds layed so flush with the surface like that. Pretty amazing work ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [December 5, 2012, 9:19am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/31 "2012-12-05T09:19:36Z")
> [@POOPRA](#): > > So are you grinding down each weld to be flush with the piping just for aesthetic purposes? Looks exteremelly time consuming since your so precise with it. Its that Dan’s 4000? Nope. No grinding at all. My welds always sit flush, unless a high amount of purge pressure or silly amounts of filler are used > [@brilliantyellowg60](#): > > Nice work! Thanks guy! > [@Onyx Z32](#): > > 1. Welder shows promise & does great work > 2. Welder attracts high demand for work > 3. Welder takes on lots of projects > 4. Welder is overloaded and deadlines are not met > 5. Welder & customers become frustrated > 6. Welder turns to alcohol, customers turn to next welder who shows promise > > Beware of the cycle 🙂 Ha well I’m sure the frustration and demand will follow. But I don’t drink, yet ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [December 5, 2012, 9:48am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/32 "2012-12-05T09:48:26Z")
> [@Onyx Z32](#): > > 1. Welder shows promise & does great work > 2. Welder attracts high demand for work > 3. Welder takes on lots of projects > 4. Welder is overloaded and deadlines are not met > 5. Welder & customers become frustrated > 6. Welder turns to alcohol, customers turn to next welder who shows promise > > Beware of the cycle 🙂 this post is full of truthiness ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [December 5, 2012, 10:01am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/33 "2012-12-05T10:01:57Z")
> [@bing](#): > > this post is full of truthiness I need to make parts for All you Canadian guys. you guys like cool shit ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [December 5, 2012, 12:46pm UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/34 "2012-12-05T12:46:35Z")
> [@BREETIME](#): > > I need to make parts for All you Canadian guys. you guys like cool shit I met Bing’s last welder… he does good work but is between 4) and 5) on my steps list, lol. ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [December 5, 2012, 5:39pm UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/35 "2012-12-05T17:39:22Z")
> [@Onyx Z32](#): > > I met Bing’s last welder… he does good work but is between 4) and 5) on my steps list, lol. haha, thanks for the warning ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [December 5, 2012, 6:28pm UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/36 "2012-12-05T18:28:58Z")
> [@POOPRA](#): > > So are you grinding down each weld to be flush with the piping just for aesthetic purposes? Looks exteremelly time consuming since your so precise with it. Its that Dan’s 4000? this is a better photo of the welds. unground,un brushed…just a little water on them to bring out the texture ---
**Author:** ![boardjnky4](https://avatars.discourse-cdn.com/v4/letter/b/96bed5/32.png) [@boardjnky4](https://forums.speedlife.net/u/boardjnky4)\ **Post date:** [December 5, 2012, 6:59pm UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/37 "2012-12-05T18:59:03Z")
Boner achieved ---
**Author:** ![TORQDSS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/torqdss/32/5125_2.png) [@TORQDSS](https://forums.speedlife.net/u/TORQDSS)\ **Post date:** [December 5, 2012, 7:37pm UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/38 "2012-12-05T19:37:01Z")
> [@BREETIME](#): > > this is a better photo of the welds. unground,un brushed…just a little water on them to bring out the texture This just distracted me from the Victoria’s Secret Fashion Show. Not even joking. ---
**Author:** ![Jeller](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jeller](https://forums.speedlife.net/u/Jeller)\ **Post date:** [December 6, 2012, 4:15am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/39 "2012-12-06T04:15:08Z")
> [@BREETIME](#): > > I get everything from my work. The piping I use is either 304-316 sanitary process pipe. Very nice :tup: We made jaegermiesters exhaust and dump tube out of sanitary pipe (I think it was all Waukesha stuff) when I worked at UDMC selling that stuff. Exhaust sounded great and was made to outlast the car LOL. ---
**Author:** ![Choda](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choda/32/7347_2.png) [@Choda](https://forums.speedlife.net/u/Choda)\ **Post date:** [December 6, 2012, 4:22am UTC](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579/40 "2012-12-06T04:22:14Z")
Nice! [Previous page](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579.md?page=1) [Next page](https://forums.speedlife.net/t/some-fab-work-ive-been-busy-with-lately/227579.md?page=3)