# Someone to tap out / remove 4 exhaust bolts.

**URL:** <https://forums.speedlife.net/t/someone-to-tap-out-remove-4-exhaust-bolts/152277>\
**Category:** Classifieds\
**Created:** [March 27, 2010, 11:06am UTC](https://forums.speedlife.net/t/someone-to-tap-out-remove-4-exhaust-bolts/152277 "2010-03-27T11:06:08Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![glitch](https://avatars.discourse-cdn.com/v4/letter/g/0ea827/32.png) [@glitch](https://forums.speedlife.net/u/glitch)\
**Post date:** [March 27, 2010, 11:06am UTC](https://forums.speedlife.net/t/someone-to-tap-out-remove-4-exhaust-bolts/152277/1 "2010-03-27T11:06:08Z")

</div>

Looking to get it done this weekend. I need someone to remove 4 rusty ass bolts that attach my header to the downpipe. Torching them didn’t work, it’s gonna require something else.

The car is a 2000 Neon.

Thanks.

---

<div class="post-metadata">

**Author:** ![glitch](https://avatars.discourse-cdn.com/v4/letter/g/0ea827/32.png) [@glitch](https://forums.speedlife.net/u/glitch)\
**Post date:** [March 27, 2010, 1:06pm UTC](https://forums.speedlife.net/t/someone-to-tap-out-remove-4-exhaust-bolts/152277/2 "2010-03-27T13:06:37Z")

</div>

Nevermind. I had to pay a shop $75 to do it cuz they were soo bad ☹

---

<div class="post-metadata">

**Author:** ![ubengineering](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ubengineering/32/5171_2.png) [@ubengineering](https://forums.speedlife.net/u/ubengineering)\
**Post date:** [March 27, 2010, 6:18pm UTC](https://forums.speedlife.net/t/someone-to-tap-out-remove-4-exhaust-bolts/152277/3 "2010-03-27T18:18:58Z")

</div>

thats not soo bad^^, glad its finally done, how is the pipe?

---

<div class="post-metadata">

**Author:** ![glitch](https://avatars.discourse-cdn.com/v4/letter/g/0ea827/32.png) [@glitch](https://forums.speedlife.net/u/glitch)\
**Post date:** [March 27, 2010, 6:28pm UTC](https://forums.speedlife.net/t/someone-to-tap-out-remove-4-exhaust-bolts/152277/4 "2010-03-27T18:28:17Z")

</div>

Just got done installing the testpipe about 30 min ago, took forever cuz I couldnt slip the mid section off even after removing some c-clamps. Had to saw through a flex pipe to rip my old cat/downpipe off. Took her around the block as is and it was super loud, gonna slap on a glasspack tomorrow. Those 4 damn bolts were the only thing holding back from completing my exhaust setup myself. Def has a nice loopy idle, I put in an R/T cam in last year.