# Sounds like my tranny is throwing around marbles

**URL:** https://forums.speedlife.net/t/sounds-like-my-tranny-is-throwing-around-marbles/232614
**Category:** SON240sx Automotive
**Created:** [September 1, 2013, 4:28pm UTC](https://forums.speedlife.net/t/sounds-like-my-tranny-is-throwing-around-marbles/232614 "2013-09-01T16:28:17Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Johner12](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@Johner12](https://forums.speedlife.net/u/Johner12)
#### Post date: [September 1, 2013, 4:28pm UTC](https://forums.speedlife.net/t/sounds-like-my-tranny-is-throwing-around-marbles/232614/1 "2013-09-01T16:28:17Z")

</div>

So I just put in a KA-T after blowing the pistons in my other motor, got the motor running good, go to put it into gear and it won’t it’s like pushing into a brick wall. If I start it up in gear the wheels start turning, then if I put the clutch in its just an assortment of metal on metal sounds. Got the driveshaft out and will continue to remove the tranny tomorrow but just wondering what I should e checking when it’s apart. Also the clutch pedal is very very stiff.

---

<div class="post-metadata">

### Author: ![Mr\_Phonso](https://avatars.discourse-cdn.com/v4/letter/m/a87d85/32.png) [@Mr\_Phonso](https://forums.speedlife.net/u/Mr_Phonso)
#### Post date: [September 1, 2013, 4:45pm UTC](https://forums.speedlife.net/t/sounds-like-my-tranny-is-throwing-around-marbles/232614/2 "2013-09-01T16:45:42Z")

</div>

Tranny was working normally before switching over the engines? If so maybe the clutch disk was put on backwards?

---

<div class="post-metadata">

### Author: ![Johner12](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@Johner12](https://forums.speedlife.net/u/Johner12)
#### Post date: [September 1, 2013, 5:20pm UTC](https://forums.speedlife.net/t/sounds-like-my-tranny-is-throwing-around-marbles/232614/3 "2013-09-01T17:20:04Z")

</div>

Well when I pulled off the track once my motor started half exploding there was a noise in the tranny but after taking my pistons out in pieces I figured that was the noise, not the tranny. I hve a clutch masters dual friction disc so it’s very obvious what side is facin outwards although anythings possible. I will double check that for sure
