# Spray foam insulation
**URL:** https://forums.speedlife.net/t/spray-foam-insulation/260289
**Category:** Shift518 Off Topic
**Created:** [September 2, 2011, 10:54pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289 "2011-09-02T22:54:36Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [September 2, 2011, 10:54pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/1 "2011-09-02T22:54:36Z")
Anyone know anyone who does this, or does it themselves? I don’t even know if you can rent the equipment for this type of work. I need to insulate the shit out of the new building before any CNC equipment goes in, and I’d like to do this instead of fiberglass due to its ability to completely seal any potential draft areas.
Hit me up if you do.
---
### Author:  [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)
#### Post date: [September 3, 2011, 3:57am UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/2 "2011-09-03T03:57:20Z")
i think there was a machine for that on craiglist this past week??
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [September 3, 2011, 6:53am UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/3 "2011-09-03T06:53:33Z")
> [@Carlisle?](https://forums.speedlife.net/t/carlisle/44860/103):
>
> Anyone know anyone who does this, or does it themselves? I don’t even know if you can rent the equipment for this type of work. I need to insulate the shit out of the new building before any CNC equipment goes in, and I’d like to do this instead of fiberglass due to its ability to completely seal any potential draft areas.
>
> Hit me up if you do.
Be aware at some point adam it may need a second go in the near future after the initial spray. It does have a tendency to settle a little bit from what I remember
---
### Author:  [@KillerBlackbird](https://forums.speedlife.net/u/KillerBlackbird)
#### Post date: [September 3, 2011, 9:28am UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/4 "2011-09-03T09:28:41Z")
I know someone must rent the equipment to do it, the lumber yard I used to work at had a cellulose blower they would loan out, maybe try calling Curtis Lumber or another mom & pop hardware/lumber yard to see if they have a spray foam machine to rent or maybe they know of someone that will loan one.
[http://greensprayfoaminsulation.com/](http://greensprayfoaminsulation.com/)
> **[North East Spray Foam & NEBPA](http://northeastsprayfoam.com/)**
>
> Spray Foam Contractors
> **[Spray Foam Insulation | Albany NY | Affordable Energy](https://www.nyaffordableenergy.com/)**
>
> Quality spray foam insulation services for residential and commercial customer in Albany, Saratoga & Warren Counties and the greater Upstate NY region.
[http://www.weaversprayfoam.com/](http://www.weaversprayfoam.com/)
---
### Author:  [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [September 3, 2011, 9:35am UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/5 "2011-09-03T09:35:58Z")
Maybe Shaker Rental, Admar, Casale or Sunbelt have one of these things to rent
---
### Author:  [@JVG](https://forums.speedlife.net/u/JVG)
#### Post date: [September 3, 2011, 11:33am UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/6 "2011-09-03T11:33:38Z")
> [@Carlisle?](https://forums.speedlife.net/t/carlisle/44860/103):
>
> Anyone know anyone who does this, or does it themselves? I don’t even know if you can rent the equipment for this type of work. I need to insulate the shit out of the new building before any CNC equipment goes in, and I’d like to do this instead of fiberglass due to its ability to completely seal any potential draft areas.
>
> Hit me up if you do.
its called the yellow pages
---
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [September 3, 2011, 2:00pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/7 "2011-09-03T14:00:44Z")
> [@Preview of a website i started to chronicle my E30GTR buildup...](https://forums.speedlife.net/t/preview-of-a-website-i-started-to-chronicle-my-e30gtr-buildup/44960/27):
>
> its called the yellow pages
No shit sherlock, I’ve googled a dozen companies online already. I was asking here first as I like to give money to people/businesses I know or of friends/recommended locals before going elsewhere.
Bonehead post JVG, bonehead post.
---
### Author:  [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)
#### Post date: [September 3, 2011, 2:02pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/8 "2011-09-03T14:02:47Z")
Dont quedtion jvg. He owned a store once.
---
### Author:  [@JVG](https://forums.speedlife.net/u/JVG)
#### Post date: [September 3, 2011, 3:27pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/9 "2011-09-03T15:27:14Z")
> [@WTB: Civic Radiator](https://forums.speedlife.net/t/wtb-civic-radiator/44845/4):
>
> No shit sherlock, I’ve googled a dozen companies online already. I was asking here first as I like to give money to people/businesses I know or of friends/recommended locals before going elsewhere.
>
> Bonehead post JVG, bonehead post.
I have heard good things about northeast spray foam.
---
### Author:  [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)
#### Post date: [September 3, 2011, 3:59pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/10 "2011-09-03T15:59:51Z")
I heard they have low low jvg rape prices too.
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [September 3, 2011, 4:04pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/11 "2011-09-03T16:04:24Z")
HAHAHAHA nothing new nick
---
### Author:  [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)
#### Post date: [September 3, 2011, 4:05pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/12 "2011-09-03T16:05:38Z")
I was just busting balls but someone threw a tantrum and negged me :rofl :rofl.
---
### Author:  [@Jammer](https://forums.speedlife.net/u/Jammer)
#### Post date: [September 3, 2011, 4:24pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/13 "2011-09-03T16:24:46Z")
Spray foam doesnt shrink or settle shady/// your thinking of cellulose.
I think the issue with renting the machines is buying the foam product usually takes a commercial account thats, not just a business card type either…
---
### Author:  [@Shady](https://forums.speedlife.net/u/Shady)
#### Post date: [September 3, 2011, 5:50pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/14 "2011-09-03T17:50:24Z")
> [@WTB: Sprint Phone](https://forums.speedlife.net/t/wtb-sprint-phone/45106/2):
>
> Spray foam doesnt shrink or settle shady/// your thinking of **cellulose.**
>
> I think the issue with renting the machines is buying the foam product usually takes a commercial account thats, not just a business card type either…
Is that the newspaper like shit?
---
### Author:  [@Singh1](https://forums.speedlife.net/u/Singh1)
#### Post date: [September 3, 2011, 5:55pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/15 "2011-09-03T17:55:33Z")
my brother does this and owns the machine
---
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [September 3, 2011, 6:00pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/16 "2011-09-03T18:00:43Z")
I did find a company online that sells DIY closed cell foam kits for this application. Pressurized nitrogen tanks of the material with guns, etc. ~$600 for 600sqft, and it’s all self contained.
This isn’t cheap stuff, averaging about $1.5-$2 per sq foot for an RV of 7(about a 1-1.5" thick layer), but far outweighs the costs with the benefits.
---
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [September 3, 2011, 6:01pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/17 "2011-09-03T18:01:19Z")
> [@wtb wheel spacers](https://forums.speedlife.net/t/wtb-wheel-spacers/45114/12):
>
> my brother does this and owns the machine
Can I get his phone number sir? PM me his info
---
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [September 3, 2011, 6:02pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/18 "2011-09-03T18:02:05Z")
> [@FS/ FT: Garrett turbo](https://forums.speedlife.net/t/fs-ft-garrett-turbo/44016/80):
>
> Is that the newspaper like shit?
No that’s the blown matt insulation.
---
### Author:  [@Singh1](https://forums.speedlife.net/u/Singh1)
#### Post date: [September 3, 2011, 6:24pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/19 "2011-09-03T18:24:18Z")
ya its stupid expensive for what it is, i remember him sayin that.
i pmed ya back
---
### Author:  [@Cossey](https://forums.speedlife.net/u/Cossey)
#### Post date: [September 3, 2011, 7:47pm UTC](https://forums.speedlife.net/t/spray-foam-insulation/260289/20 "2011-09-03T19:47:12Z")
> [@wtb wheel spacers](https://forums.speedlife.net/t/wtb-wheel-spacers/45114/2):
>
> I heard they have low low jvg rape prices too.
I was there most of the time and never recognized you coming in, so I don’t know why you’d comment on JVG’s pricing. If you’re going by what Pete is saying, well, Pete is cheap as fuck. Except if it has anything to do w/ Buscher.
And if you really thought his prices were high, you most certainly have never been around during the APG days.
[Next page](https://forums.speedlife.net/t/spray-foam-insulation/260289.md?page=2)