# Spring Parts Swap - Suspension, Brakes, Methanol, etc. **URL:** \ **Category:** Classifieds\ **Created:** [April 16, 2010, 2:15pm UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496 "2010-04-16T14:15:22Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![NewfoundlandDude](https://avatars.discourse-cdn.com/v4/letter/n/9fc348/32.png) [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)\ **Post date:** [April 16, 2010, 2:15pm UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496/1 "2010-04-16T14:15:22Z")
I’ve accumulated a bunch of parts over the winter throughout my build, lets use this thread to swap/buy/sell some parts! I won’t be using this stuff, so I’d like to sell or swap. I might not get any hits, but it’ll be on a couple of forums, lets see what you have. What I want (I’ll trade for these parts): - Z32 front brakes with SS braided conversion lines - Only interested in Hawk HP+ pads for these - Z32 15/16" BMC - 17" race tires maybe (V710, A6, C71 Hankooks) - 245 or wider - Cash - Other interesting trades What I have (Copied from my various threads): _ **Godspeed Adjustable RLCA** _ Not going to be using the rears right now. They’re the top ones in the pic, brand new in box. ![http://lh3.ggpht.com/_bPcbild_wyQ/S1jTdBye0DI/AAAAAAAAA6E/Z2HOP0GTI_I/100_0347.JPG](http://lh3.ggpht.com/_bPcbild_wyQ/S1jTdBye0DI/AAAAAAAAA6E/Z2HOP0GTI_I/100_0347.JPG) _ **Methanol Injection Kit** _ I bought this over the winter and never installed it. The guy said a local guy (In Nova Scotia) makes them and sells them. It uses a Shurflo pump (recommends 50/50 mix), and the parts shown below. This was a “BNIB” buy, I haven’t had time to look into the install. ![http://lh6.ggpht.com/_bPcbild_wyQ/S8jJafgAUKI/AAAAAAAACW8/iGue1HVfBAA/s640/Methanol%20Injection%20Kit.jpg](http://lh6.ggpht.com/_bPcbild_wyQ/S8jJafgAUKI/AAAAAAAACW8/iGue1HVfBAA/s640/Methanol%20Injection%20Kit.jpg) _ **Tanabe Sustec " Drift braces"** _ The front braces your tension rod brackets from frame rail to frame rail. The rear braces your sub frame to the chassis on both sides. Looking for $250 shipped. ![http://www.tanabe-usa.com/other/files/23_img1.jpg](http://www.tanabe-usa.com/other/files/23_img1.jpg) ![http://www.tanabe-usa.com/other/files/79_img1.jpg](http://www.tanabe-usa.com/other/files/79_img1.jpg) Sorry I didn’t specify, the rears are for an S14, the fronts fit both S13 and S14. Real Pics: ![http://lh6.ggpht.com/_bPcbild_wyQ/S7JCdLTDRDI/AAAAAAAACGs/wZZoAhQUxJc/100_1019.JPG](http://lh6.ggpht.com/_bPcbild_wyQ/S7JCdLTDRDI/AAAAAAAACGs/wZZoAhQUxJc/100_1019.JPG) ![http://lh5.ggpht.com/_bPcbild_wyQ/S7JCd03Hx0I/AAAAAAAACHY/BUPZYg_eLOs/100_1020.JPG](http://lh5.ggpht.com/_bPcbild_wyQ/S7JCd03Hx0I/AAAAAAAACHY/BUPZYg_eLOs/100_1020.JPG) ![http://lh4.ggpht.com/_bPcbild_wyQ/S7JCepdPEtI/AAAAAAAACG4/VFI-t4kco9A/100_1022.JPG](http://lh4.ggpht.com/_bPcbild_wyQ/S7JCepdPEtI/AAAAAAAACG4/VFI-t4kco9A/100_1022.JPG) ![http://lh6.ggpht.com/_bPcbild_wyQ/S7JCfC5fQ5I/AAAAAAAACHg/TjVXtbxiIGs/100_1023.JPG](http://lh6.ggpht.com/_bPcbild_wyQ/S7JCfC5fQ5I/AAAAAAAACHg/TjVXtbxiIGs/100_1023.JPG) Got a request in another thread for installed pics: They bolt near the back of the transmission tunnel, and then at the front-rear subframe cups. They wouldn’t require removal of the subframe or anything like that. ![http://lh3.ggpht.com/_bPcbild_wyQ/S7JI8fnbPTI/AAAAAAAACJo/N3crt15Akb4/IMG_1917.jpg](http://lh3.ggpht.com/_bPcbild_wyQ/S7JI8fnbPTI/AAAAAAAACJo/N3crt15Akb4/IMG_1917.jpg) ![http://lh6.ggpht.com/_bPcbild_wyQ/S7JI8VsCmEI/AAAAAAAACJk/pSweYCM1wMA/IMG_1922.jpg](http://lh6.ggpht.com/_bPcbild_wyQ/S7JI8VsCmEI/AAAAAAAACJk/pSweYCM1wMA/IMG_1922.jpg) ![http://lh5.ggpht.com/_bPcbild_wyQ/S7JJMVJ1C9I/AAAAAAAACKE/_VeSSH5gIBU/IMG_1925.jpg](http://lh5.ggpht.com/_bPcbild_wyQ/S7JJMVJ1C9I/AAAAAAAACKE/_VeSSH5gIBU/IMG_1925.jpg) _ **GTSpec Turbo Elbow** _ I took this from my GT2871R turbo, so it will bolt up to any t25/28 turbo. For an SR20Det. [http://www.gtspec.com/index.php?nav=products\_category&pid=171&cat=111](http://www.gtspec.com/index.php?nav=products_category&pid=171&cat=111) MSRP: $199 USD Asking $130 CAD ![http://www.gtspec.com/images/s14-turbooutlet.jpg](http://www.gtspec.com/images/s14-turbooutlet.jpg) ![http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0339.jpg](http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0339.jpg) ![http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0340.jpg](http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0340.jpg) _ **Autometer Cobalt Transmission Temperature Gauge** _ Brand new in box. I bought this new, and never used it. It’s been opened to inspect, but never left my house or the box. [http://www.autometer.com/cat\_gaugedetail.aspx?gid=3434&sid=4](http://www.autometer.com/cat_gaugedetail.aspx?gid=3434&sid=4) MSRP: $70 USD Asking: $50 CAD ![http://www.autometer.com/img/products/6149_d.jpg](http://www.autometer.com/img/products/6149_d.jpg) ![http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0333.jpg](http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0333.jpg) ![http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0334.jpg](http://i204.photobucket.com/albums/bb101/Puddincole/IMG_0334.jpg) **_Brembo GT 13" 4 Piston BBK_** Lets reserve this for the “Ballers”. MSRP on this kit is about 3K. I’ll accept 2K. (Cash + Trades) I know I’m not going to get any bites for this, but why not list it. If you’ve got some interesting trades it could work. Includes the kit + upgraded Endless Blue “M” Pads (also Brembo pads) Brembo Gran Turismo front big brake system for a 5-lug 240SX. Specs: GT 4-Piston calipers (F50-Type) - Red Drilled 2-piece vented 332x32mm rotors (13" rotors) HP1000 pads Braided lines Kit 1B1.7012A in this table I made up to show the similarities to the 300Zx and 350Z kits. ![http://lh6.ggpht.com/_bPcbild_wyQ/S7KkiOWDbsI/AAAAAAAACLY/YAUbSEi5Ef4/s912/Brembo.jpg](http://lh6.ggpht.com/_bPcbild_wyQ/S7KkiOWDbsI/AAAAAAAACLY/YAUbSEi5Ef4/s912/Brembo.jpg) This type: ![http://www.tirerack.com/images/brakes/brembo/gt_styles/style_3.jpg](http://www.tirerack.com/images/brakes/brembo/gt_styles/style_3.jpg) Here’s some additional info on the kit. (Style 3C) _[Brembo Gran Turismo Brake Systems](http://www.tirerack.com/brakes/brembo/gran_turismo.jsp)_ Brembo GT Site - Insert Nissan 240SX [http://www.brembo.com/CatalogoHPGT/Templates/SearchHPGT.aspx?NRMODE=Published&NRNODEGUID={0DECE949-F261-4E29-A729-C4A049DD61FE}&NRORIGINALURL=%2FUS%2FPerformance%2FGranturismoCatalogue%2F&NRCACHEHINT=NoModifyGuest](http://www.brembo.com/CatalogoHPGT/Templates/SearchHPGT.aspx?NRMODE=Published&NRNODEGUID=%7B0DECE949-F261-4E29-A729-C4A049DD61FE%7D&NRORIGINALURL=%2fUS%2fPerformance%2fGranturismoCatalogue%2f&NRCACHEHINT=NoModifyGuest) Lets see what you have. These are some good parts, lets trade some stuff. ---
**Author:** ![NewfoundlandDude](https://avatars.discourse-cdn.com/v4/letter/n/9fc348/32.png) [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)\ **Post date:** [April 18, 2010, 7:39pm UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496/2 "2010-04-18T19:39:04Z")
Methanol Kit no longer for sale. Godspeed arms and front Tanabe brace spoken for (Rear Tanabe’s still available). No longer interested in the Z32 fronts for trade. Offer away. ---
**Author:** ![ajayasinghe](https://avatars.discourse-cdn.com/v4/letter/a/da6949/32.png) [@ajayasinghe](https://forums.speedlife.net/u/ajayasinghe)\ **Post date:** [April 19, 2010, 2:27pm UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496/3 "2010-04-19T14:27:39Z")
If you still want a 15/16 bmc I got one that I just took off. In fulling working order. Shoot me an offer. ---
**Author:** ![NewfoundlandDude](https://avatars.discourse-cdn.com/v4/letter/n/9fc348/32.png) [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)\ **Post date:** [April 19, 2010, 4:18pm UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496/4 "2010-04-19T16:18:28Z")
I had a guy offer me one for $50 (a 15/16 or a 1") about a month ago, but it now looks like I’ll have a 7/8" and 17/16" on hand. I didn’t buy it from the guy at the time, and now it’s gone. Not sure how many BMC’s I really need kicking around…lol I think I’ll pass for now, as I don’t really have any $$ for mods, and people usually want $75-$100 for them. Thanks though. ---
**Author:** ![ajayasinghe](https://avatars.discourse-cdn.com/v4/letter/a/da6949/32.png) [@ajayasinghe](https://forums.speedlife.net/u/ajayasinghe)\ **Post date:** [April 20, 2010, 10:31am UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496/5 "2010-04-20T10:31:59Z")
What? You can never have too many BMC’s! JK’s! haha, no worries. ---
**Author:** ![NewfoundlandDude](https://avatars.discourse-cdn.com/v4/letter/n/9fc348/32.png) [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)\ **Post date:** [April 20, 2010, 10:47am UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496/6 "2010-04-20T10:47:12Z")
Haha, how much were you selling it for anyway. ---
**Author:** ![veloz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/veloz/32/5586_2.png) [@veloz](https://forums.speedlife.net/u/veloz)\ **Post date:** [April 20, 2010, 12:46pm UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496/7 "2010-04-20T12:46:27Z")
John you want one? I have one kicking around. Actually, I think I have 2 PM me, I’m sure we can work something out ---
**Author:** ![ajayasinghe](https://avatars.discourse-cdn.com/v4/letter/a/da6949/32.png) [@ajayasinghe](https://forums.speedlife.net/u/ajayasinghe)\ **Post date:** [April 20, 2010, 2:23pm UTC](https://forums.speedlife.net/t/spring-parts-swap-suspension-brakes-methanol-etc/153496/8 "2010-04-20T14:23:55Z")
I was thinking $60 bucks or so. I just want to get rid of it… not really looking to make money… so you can make me an offer on that $60. How much do you want for those rear tanabe braces you got left?