# Springs install **URL:** \ **Category:** Shift518 Automotive\ **Created:** [July 12, 2012, 9:50am UTC](https://forums.speedlife.net/t/springs-install/264373 "2012-07-12T09:50:06Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 12, 2012, 12:48pm UTC](https://forums.speedlife.net/t/springs-install/264373/21 "2012-07-12T12:48:33Z")
rent me the rack when your done! lol ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [July 12, 2012, 12:49pm UTC](https://forums.speedlife.net/t/springs-install/264373/22 "2012-07-12T12:49:04Z")
this thread is AWESOME. :rofl :rofl :rofl ---
**Author:** ![ds50r](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ds50r/32/3491_2.png) [@ds50r](https://forums.speedlife.net/u/ds50r)\ **Post date:** [July 12, 2012, 12:52pm UTC](https://forums.speedlife.net/t/springs-install/264373/23 "2012-07-12T12:52:31Z")
No they both play a factor in it if you charged time for time on a job you would t be making all that much money the more efficiaten the tech is with quality and timely ness makes or brakes the deal… Like charging 15 mins to do a strut job at 100$ per hour your maybe made enough to pay your tech that did the job so getting that 1.5 hours covers a fraction of your light bill and what not for the shop, but that’s just my take on it I’m not a shop owner or anything ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 12, 2012, 1:08pm UTC](https://forums.speedlife.net/t/springs-install/264373/24 "2012-07-12T13:08:07Z")
I agree and dont at the same time. Its all in how each place wants to run an honest business. You can either over quote (hrs) with a lower rate and bang the job out, and jump on the next to make the profit. or you can under quote with a higher rate and do the same thing. Eitherway there is a point that you have to be reasonable on both tokens to be profitable, efficient and not a shark. Its a doube edge sword. Either way, generally speaking including the calculations for overhead into your labor rate, is much easier to keep on top of then pressuring the techs to bang out jobs faster than the labor estimate said to, in order to be profitable. that was my point. there really isnt a right and wrong. ---
**Author:** ![d\_gage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/d_gage/32/6321_2.png) [@d\_gage](https://forums.speedlife.net/u/d_gage)\ **Post date:** [July 12, 2012, 1:10pm UTC](https://forums.speedlife.net/t/springs-install/264373/25 "2012-07-12T13:10:19Z")
Shop talk ITT. Shits been had been handled. ---
**Author:** ![KillerBlackbird](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/killerblackbird/32/6525_2.png) [@KillerBlackbird](https://forums.speedlife.net/u/KillerBlackbird)\ **Post date:** [July 12, 2012, 1:11pm UTC](https://forums.speedlife.net/t/springs-install/264373/26 "2012-07-12T13:11:51Z")
I bought a coil spring compressor from Snap On for less than $100. Buy jack stands, floor jack, and some tools and you’ll still be under $700 and have the tools to keep forever and money left over to get an alignment, which should be less than $100 too. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [July 12, 2012, 1:14pm UTC](https://forums.speedlife.net/t/springs-install/264373/27 "2012-07-12T13:14:59Z")
Wow ---
**Author:** ![AVB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/avb/32/6751_2.png) [@AVB](https://forums.speedlife.net/u/AVB)\ **Post date:** [July 12, 2012, 1:21pm UTC](https://forums.speedlife.net/t/springs-install/264373/28 "2012-07-12T13:21:49Z")
> [@FS: JetBlue Flight Credit](https://forums.speedlife.net/t/fs-jetblue-flight-credit/48555/21): > > I bought a coil spring compressor from Snap On for less than $100. > Buy jack stands, floor jack, and some tools and you’ll still be under $700 and have the tools to keep forever and money left over to get an alignment, which should be less than $100 too. I have no time to do them. But someone is already doing them ---
**Author:** ![ds50r](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ds50r/32/3491_2.png) [@ds50r](https://forums.speedlife.net/u/ds50r)\ **Post date:** [July 12, 2012, 1:26pm UTC](https://forums.speedlife.net/t/springs-install/264373/29 "2012-07-12T13:26:56Z")
Your 100% right and with that attitude is what separates you from the shops that give good repair shops a bad name ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 12, 2012, 1:37pm UTC](https://forums.speedlife.net/t/springs-install/264373/30 "2012-07-12T13:37:32Z")
thanks CM. Glad to see you didnt think I was finding fault with ya. Just having a discussion. Its a fine line in pleasing customers and keeping the business going in the direction you want it to. ---
**Author:** ![ds50r](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ds50r/32/3491_2.png) [@ds50r](https://forums.speedlife.net/u/ds50r)\ **Post date:** [July 12, 2012, 1:53pm UTC](https://forums.speedlife.net/t/springs-install/264373/31 "2012-07-12T13:53:46Z")
Haha yea I def see where you are coming from and your right there is a very fine line and you can’t keep everyone happy my best friend owns a shop and I’ve seen it where a customer is just too stubborn to understand what they are being told and at that point you have to cut your losses and move on and there are also the assholes that want everything done for free and right away (that statment is nOt directed to the original poster as I don’t know anything about you) ---
**Author:** ![RTrac1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rtrac1/32/6312_2.png) [@RTrac1](https://forums.speedlife.net/u/RTrac1)\ **Post date:** [July 12, 2012, 1:55pm UTC](https://forums.speedlife.net/t/springs-install/264373/32 "2012-07-12T13:55:27Z")
blahblahblahblah $800 is still robbery for installing some springs ---
**Author:** ![HudsonFalcon](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hudsonfalcon/32/6460_2.png) [@HudsonFalcon](https://forums.speedlife.net/u/HudsonFalcon)\ **Post date:** [July 12, 2012, 2:19pm UTC](https://forums.speedlife.net/t/springs-install/264373/33 "2012-07-12T14:19:26Z")
Everyone has to make a living but it shouldn’t cost you a grand to lower your car an inch. ---
**Author:** ![Cossey](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Cossey](https://forums.speedlife.net/u/Cossey)\ **Post date:** [July 12, 2012, 2:34pm UTC](https://forums.speedlife.net/t/springs-install/264373/34 "2012-07-12T14:34:44Z")
> [@TW: 2002 BMW M3 - 6spd - Possible trade](https://forums.speedlife.net/t/tw-2002-bmw-m3-6spd-possible-trade/49791/82): > > Everyone has to make a living but it shouldn’t cost you a grand to lower your car an inch. Werd. At that price, you can buy some cheapo coilovers which will save at least half of the labor cost on some vehicles. Honest mechanics seem to get harder to find for some. We have some assets to the community such as Boxersix, MEATPAWS, KK, Wayne, etc… that make any of the bullshit you may find on Shift worth it the first time you need the help of any of them. As just about anyone here knows, that unless it is warranty work, Adam (Boxersix) gets all of my business as he’s more than fair, honest, and a great friend to top it all off. For a recent example, I have to replace a blown TiAL turbo on the 911 and had to ship it out. Adam boxed it up properly and dropped it off at my house ready to go except for postage. It’s small stuff like that that make you realize he’s not just a mechanic, but he’s also a friend. ---
**Author:** ![d\_gage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/d_gage/32/6321_2.png) [@d\_gage](https://forums.speedlife.net/u/d_gage)\ **Post date:** [July 12, 2012, 4:02pm UTC](https://forums.speedlife.net/t/springs-install/264373/35 "2012-07-12T16:02:39Z")
> [@Help with bike tires.](https://forums.speedlife.net/t/help-with-bike-tires/49619/28): > > Werd. At that price, you can buy some cheapo coilovers which will save at least half of the labor cost on some vehicles. Exactly what I told AVB ---
**Author:** ![slwrthnu](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slwrthnu/32/6296_2.png) [@slwrthnu](https://forums.speedlife.net/u/slwrthnu)\ **Post date:** [July 12, 2012, 5:18pm UTC](https://forums.speedlife.net/t/springs-install/264373/36 "2012-07-12T17:18:44Z")
for that much money why wouldn’t u just buy the tools and do it yourself. ---
**Author:** ![AVB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/avb/32/6751_2.png) [@AVB](https://forums.speedlife.net/u/AVB)\ **Post date:** [July 12, 2012, 5:20pm UTC](https://forums.speedlife.net/t/springs-install/264373/37 "2012-07-12T17:20:45Z")
> [@King Fu Panda](https://forums.speedlife.net/t/king-fu-panda/49969/8): > > for that much money why wouldn’t u just buy the tools and do it yourself. Valid point. But as said before in my posts I do not have the time. And I’m not paying $700. The whole point of me starting this thread ---
**Author:** ![Boxersix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boxersix/32/6327_2.png) [@Boxersix](https://forums.speedlife.net/u/Boxersix)\ **Post date:** [July 12, 2012, 5:22pm UTC](https://forums.speedlife.net/t/springs-install/264373/38 "2012-07-12T17:22:39Z")
Is this on the evo? Anyone with half a brain and basic tools could get that job done in four hours. Toss in air tools and i need not explain … ---
**Author:** ![AVB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/avb/32/6751_2.png) [@AVB](https://forums.speedlife.net/u/AVB)\ **Post date:** [July 12, 2012, 5:25pm UTC](https://forums.speedlife.net/t/springs-install/264373/39 "2012-07-12T17:25:03Z")
> [@somebody verify what I'm seeing?](https://forums.speedlife.net/t/somebody-verify-what-im-seeing/50135/10): > > Is this on the evo? Anyone with half a brain and basic tools could get that job done in four hours. Toss in air tools and i need not explain > > … Yes this is on the evo. Obviously springs are a simple install but I DO NOT HAVE THE TIME. Someone is already doing them Saturday ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [July 12, 2012, 5:41pm UTC](https://forums.speedlife.net/t/springs-install/264373/40 "2012-07-12T17:41:31Z")
Thanks for the props cossey:’( , I can do that job in under 3 hrs but not one person brought me up !!! Fuck all of u nomore meatpaws help [Previous page](https://forums.speedlife.net/t/springs-install/264373.md?page=1) [Next page](https://forums.speedlife.net/t/springs-install/264373.md?page=3)