# sr clutch fork nube move

**URL:** <https://forums.speedlife.net/t/sr-clutch-fork-nube-move/230371>\
**Category:** SON240sx Automotive\
**Created:** [May 3, 2013, 8:01am UTC](https://forums.speedlife.net/t/sr-clutch-fork-nube-move/230371 "2013-05-03T08:01:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stephen\_Pro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stephen_pro/32/5722_2.png) [@Stephen\_Pro](https://forums.speedlife.net/u/Stephen_Pro)\
**Post date:** [May 3, 2013, 8:01am UTC](https://forums.speedlife.net/t/sr-clutch-fork-nube-move/230371/1 "2013-05-03T08:01:28Z")

</div>

So I reinstalled my sr after having work done, and forgot to align my clutch fork and almost everythings bolted back up now. Does anyone have any tips on how to fix it/adjust it without to much work? I was thinking it might be easiest to unbolt the tranny and pivot the motor forward and sqeeze my hand in …  
Thanks

---

<div class="post-metadata">

**Author:** ![Steve660](https://avatars.discourse-cdn.com/v4/letter/s/ecb155/32.png) [@Steve660](https://forums.speedlife.net/u/Steve660)\
**Post date:** [May 3, 2013, 10:46am UTC](https://forums.speedlife.net/t/sr-clutch-fork-nube-move/230371/2 "2013-05-03T10:46:03Z")

</div>

You will have to drop the tranny, unbolting it from the motor is the hard part anyways.

---

<div class="post-metadata">

**Author:** ![Stephen\_Pro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stephen_pro/32/5722_2.png) [@Stephen\_Pro](https://forums.speedlife.net/u/Stephen_Pro)\
**Post date:** [May 3, 2013, 10:55am UTC](https://forums.speedlife.net/t/sr-clutch-fork-nube-move/230371/3 "2013-05-03T10:55:18Z")

</div>

Yeah I figured, I pull the motor almost every year for something new, I was just hoping I didn’t have to again, like I was hoping there was a way to move it from the outside through the hole the fork comes out at or something

---

<div class="post-metadata">

**Author:** ![Markd1](https://avatars.discourse-cdn.com/v4/letter/m/ccd318/32.png) [@Markd1](https://forums.speedlife.net/u/Markd1)\
**Post date:** [May 3, 2013, 8:42pm UTC](https://forums.speedlife.net/t/sr-clutch-fork-nube-move/230371/4 "2013-05-03T20:42:00Z")

</div>

make the slave cylinder pin longer or shorter?

---

<div class="post-metadata">

**Author:** ![Singh](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@Singh](https://forums.speedlife.net/u/Singh)\
**Post date:** [May 7, 2013, 11:27am UTC](https://forums.speedlife.net/t/sr-clutch-fork-nube-move/230371/5 "2013-05-07T11:27:00Z")

</div>

if you didn’t align the clutch, i suggest you remove your tranny, align it and reinstall. Might wanna check the pilot bushing too.

Like you guys said, unbolting is the hardest part.