# sr passed etest today... numbers inside. **URL:** \ **Category:** SON240sx Automotive\ **Created:** [October 25, 2007, 3:10pm UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531 "2007-10-25T15:10:26Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![seth](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/seth/32/3175_2.png) [@seth](https://forums.speedlife.net/u/seth)\ **Post date:** [October 25, 2007, 3:10pm UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/1 "2007-10-25T15:10:26Z")
stock sr. atmosphere bov 3 inch apexi n1 dual 3 inch hks down pipe 3 inch magnaflow highflow cat ``` limit result ``` hp ppm 318 114 co% 2.52 .55 no ppm 3353 2270 rpm 2739 curb idle test limit reading hc ppm 300 92 co% 1.50 .10 rpm 1075 both dilutions were 15 The car was tested under hotrod… so those are the current hotrod limits. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [October 25, 2007, 5:50pm UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/2 "2007-10-25T17:50:06Z")
Dam I should post up my numbers, they were a lot lower ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 25, 2007, 8:40pm UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/3 "2007-10-25T20:40:09Z")
> [@iblew my saturn engine](https://forums.speedlife.net/t/iblew-my-saturn-engine/14637/13): > > Dam I should post up my numbers, they were a lot lower Thanks for the update chief. :hsugh: Here are my comparison on a fully stock SR w/ magnaflow cat: Running: HPC: 123 (Limit: 305) CO %: 0.66 (Limit: 2.42) NO ppm: 2531 (Limit: 3215) Idle: HPC: 268 (Limit: 300) CO %: 0.61 (Limit: 1.50) NO ppm: N/A ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [October 26, 2007, 6:00am UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/4 "2007-10-26T06:00:40Z")
edit… double post wtf ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [October 26, 2007, 6:02am UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/5 "2007-10-26T06:02:24Z")
I’ve got’cha both beat… HC ppm limit = 318 reading = 55 (Pass) CO% limit = 2.52 reading = 0.12 (Pass) NO ppm limit = 3353 reading = 1024 (Pass) curb idle HC ppm limit = 300 reading = 35 (Pass) CO% limit = 1.50 reading = 0.00 (pass) NO pmm limit = N/A reading = N/A ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [October 26, 2007, 6:25am UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/6 "2007-10-26T06:25:25Z")
I win HC ppm limit = 64 reading = 51 (Pass) CO% limit = 0.35 reading = 0.04 (Pass) NO ppm limit = 485 reading = 406 (Pass) curb idle HC ppm limit = 200 reading = 52 (Pass) CO% limit = 1 reading = 0.30 (pass) NO pmm limit = N/A reading = N/A ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [October 26, 2007, 6:45am UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/7 "2007-10-26T06:45:09Z")
i win 3 inch down pipe 3 inch gutted cat 3 1/4 inch exhaust. mines tuned ecu. if you know anything about these they arent kind on gas at all.also stone cold. failed by 60 luckly it was just the test at school ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 26, 2007, 7:40am UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/8 "2007-10-26T07:40:16Z")
I had a test done this year. Running stock SR w/ 2.75" exhaust ( **no cat** ), AEM EMS (3-bar MAP) and 740cc injectors as far as ‘big’ mods go. You ready for this? ## 2007 Running: HPC: 157 (Limit: 305) CO %: 1.93 (Limit: 2.42) NO ppm: 1793 (Limit: 3215) Idle: HPC: **1478** (Limit: 300) CO %: **4.62** (Limit: 1.50) NO ppm: N/A Did pretty 🆒 as far as running but fucking owned on idle. 🤣 Running clean is for Nancies. :o ---
**Author:** ![jlee](https://avatars.discourse-cdn.com/v4/letter/j/898d66/32.png) [@jlee](https://forums.speedlife.net/u/jlee)\ **Post date:** [October 26, 2007, 7:51am UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/9 "2007-10-26T07:51:13Z")
wow… looking at all of you guys’ limits i should’ve done mine under hot rod i would’ve passes non problem if that had been the case. i asked the guy who did my e-test about hot rod setting and he said the limits wouldn’t change that much. how did you guys get them to test your car under hot rod? Cause i passed everything under being tested as a ka except the nox readings limit was 350 or something and my reading was 1560. Jon ---
**Author:** ![seth](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/seth/32/3175_2.png) [@seth](https://forums.speedlife.net/u/seth)\ **Post date:** [October 26, 2007, 8:25am UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/10 "2007-10-26T08:25:49Z")
yeah hotrod would see you passing. gonad your stock setup was pretty much like mine. Aem showed you a great idle tune eh ? lol ---
**Author:** ![newstar31](https://avatars.discourse-cdn.com/v4/letter/n/ac8455/32.png) [@newstar31](https://forums.speedlife.net/u/newstar31)\ **Post date:** [October 27, 2007, 5:03pm UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/11 "2007-10-27T17:03:40Z")
i plan on etestin my sr 240 next week i have a 3" downpipe with 3" hi flow cat and dunno wat size exhaust do i just ask the guy to run it under hotrod specs or what wat do u guys think? ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 27, 2007, 10:30pm UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/12 "2007-10-27T22:30:25Z")
Since you are in Brampton, go to the CT at Shoppers World. Usually young guys are working there and should be no problem convincing them to run under Hot Rod. Try to find a brown guy working the e-test machine. 😉 ---
**Author:** ![rex\_thugs](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rex_thugs/32/5598_2.png) [@rex\_thugs](https://forums.speedlife.net/u/rex_thugs)\ **Post date:** [October 28, 2007, 5:03pm UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/13 "2007-10-28T17:03:14Z")
i gotta get my car e tested as well if find a cat 3inch for cheap ill take it to a shop i used to work at and put it on practice mode to see how it does if it passes ill do it in the regular mode if it doesnt thennn i shall do it another way. ---
**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\ **Post date:** [October 29, 2007, 12:19am UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/14 "2007-10-29T00:19:53Z")
> [@\*\*\*\*\*Official: Mighty Meet Thread\*\*\*\*\*](https://forums.speedlife.net/t/official-mighty-meet-thread/10918/451): > > Since you are in Brampton, go to the CT at Shoppers World. > > Usually young guys are working there and should be no problem convincing them to run under Hot Rod. > > Try to find a brown guy working the e-test machine. 😉 its brampton of course there is a brown guy running hte e-test machine i know a few htat work at that canadian tire. ---
**Author:** ![newstar31](https://avatars.discourse-cdn.com/v4/letter/n/ac8455/32.png) [@newstar31](https://forums.speedlife.net/u/newstar31)\ **Post date:** [October 30, 2007, 7:59pm UTC](https://forums.speedlife.net/t/sr-passed-etest-today-numbers-inside/110531/15 "2007-10-30T19:59:03Z")
nice then i guess im goin to ct at shoppers world now i have a hiflow cat is it goin to make it harder