# SR Power Steering Bolt Size?

**URL:** <https://forums.speedlife.net/t/sr-power-steering-bolt-size/98775>\
**Category:** SON240sx Automotive\
**Created:** [August 10, 2006, 10:20am UTC](https://forums.speedlife.net/t/sr-power-steering-bolt-size/98775 "2006-08-10T10:20:10Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![imported\_Lunchbox](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@imported\_Lunchbox](https://forums.speedlife.net/u/imported_Lunchbox)\
**Post date:** [August 10, 2006, 10:20am UTC](https://forums.speedlife.net/t/sr-power-steering-bolt-size/98775/1 "2006-08-10T10:20:10Z")

</div>

Alright i’ve checked the 2 FSMs I have, and searched, and I can still not find the size of the banjo bolt that attaches the high pressure lines to the pump. This is for a s13 sr power steering pump. Any info would be great thanks

Jim

---

<div class="post-metadata">

**Author:** ![dp-ped](https://avatars.discourse-cdn.com/v4/letter/d/2bfe46/32.png) [@dp-ped](https://forums.speedlife.net/u/dp-ped)\
**Post date:** [August 11, 2006, 9:59am UTC](https://forums.speedlife.net/t/sr-power-steering-bolt-size/98775/2 "2006-08-11T09:59:08Z")

</div>

Hey Jim

i replaced my ps pump sometime back, i remember i had all the right sized sockets to do the job (normal socket set) exept for one, which i had to buy at canadian tire … it was a 24mm, i don’t recal running into any other bolts that i couldn’t remove…

i just took out one powersteering pump and replaced it with another one  
hope this helped

-Ped

---

<div class="post-metadata">

**Author:** ![imported\_Lunchbox](https://avatars.discourse-cdn.com/v4/letter/i/a87d85/32.png) [@imported\_Lunchbox](https://forums.speedlife.net/u/imported_Lunchbox)\
**Post date:** [August 11, 2006, 10:06am UTC](https://forums.speedlife.net/t/sr-power-steering-bolt-size/98775/3 "2006-08-11T10:06:16Z")

</div>

Hey thanks, But I need the size of the threaded part, I assume it is a metric bolt so like M12X1.5 or something like that. I know it is bigger than the one for the KA24e pump.

Jim

---

<div class="post-metadata">

**Author:** ![240newbie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/240newbie/32/5487_2.png) [@240newbie](https://forums.speedlife.net/u/240newbie)\
**Post date:** [August 12, 2006, 9:31pm UTC](https://forums.speedlife.net/t/sr-power-steering-bolt-size/98775/4 "2006-08-12T21:31:20Z")

</div>

The bolt is the same as a KA24DE P\S bolt  
as for thread pitch thats tough to find…  
best bet is to grab the bolt off someone whos got a KA24DE (make sure to get the 2 brass fittings as well) or from a junk yard. and the Hicas bolts from the KA and SR WILL NOT WORK as they are the same size as the KA24E.